Access after changing WebConfigurator port
-
Just a quick question that has me stumped. I've Googled and also looked it up in two different pfsense book (the cookbook and one other one). Thanks in advance.
I see that I can change the webConfigurator's port from the default as a "security through obscurity" measure. If I do that, how do I then access the webConfigurator? I'm assuming I enter the IP in the URL field, followed by a colon and the new port number (example: https://192.168.100.1:5985) but I'd like to verify that. It's weird that this is not documented anywhere.
Thanks again!
-
That is some really basic stuff.. Not sure why that would be an issue for documentation?
Its not really documented what the difference between a /24 and /23 is either. You would normally assume someone using such a device has some basic understanding of networking, etc.
But yes if your change your https port to 5985 then yes https://ipaddressorhostname:port would be the correct way to access the webgui on this new port. How else might you access it? ;)
-
Thanks! I know it's rather basic but I didn't want to assume anything and end up locking myself out, figured it was better to verify it just in case.