NUT blazer_usb
-
Hi all,
First post, long time lurker, props to everyone for the work on 2.3.x
It's running perfectly with one slight problem. NUT and the blazer_usb driver.
I'm running 2.3.1 with a generic Asian UPS (APC are hard to find here) Software provided is UPSilion 2000
I've followed all the posts pertaining to this without seeing a resolution, I've tried adding subdriver,productid, vendorid, langid_fix to ups.conf
user=root [sunpac] driver=blazer_usb langid_fix=0x4095 subdriver=krauler productid=0005 vendorid=0925 port=auto
when i try to start it I get
starting blazer_usb Network UPS Tools - UPS driver controller 2.7.3 Network UPS Tools - Megatec/Q1 protocol USB driver 0.11 (2.7.3) No supported devices found. Please check your device availability with 'lsusb' and make sure you have an up-to-date version of NUT. If this does not help, try running the driver with at least 'subdriver', 'vendorid' and 'productid' options specified. Please refer to the man page for details about these options (man 8 blazer_usb). Driver failed to start (exit status=1) blazer_usb failed to start
The GUI says
ERROR: NUT is enabled, however the service is not running!
I was able to get it to run at one point but with an error that it could not get a status from the UPS but I can't reproduce it.
Syslog shows :
May 19 11:01:19 kernel ugen0.3: <vendor 0x0925="">at usbus0
May 19 11:01:19 kernel uhid1: <vendor 0="" 3="" 0x0925="" ups="" usb="" mon="" v1.4,="" class="" 0,="" rev="" 1.10="" 0.01,="" addr="">on usbus0Has anyone managed to get this to work and if so could they post it here. I want to be able to recommend Pfsense to people but this is the one snag that's stopping me. Most UPS options around here are unknown generics which will hit similar issues.
Hope someone can help as rainy season just started and that's when problem can arise with storms.
John</vendor></vendor>
-
Probably best to diagnose things directly via the NUT command line tools rather than the package gui. The NUT support groups are probably your best bet for assistance:
-
After doing some more digging on ups lists I have got this far
Network UPS Tools - Megatec/Q1 protocol USB driver 0.12 (2.7.4)
0.000000 debug level is '4'
0.000294 language ID workaround enabled (using '0x4095')
0.000538 Checking device (0925/1234) (/dev/usb//dev/ugen0.2)
0.129193 - VendorID: 0925
0.129198 - ProductID: 1234
0.129201 - Manufacturer: unknown
0.129203 - Product: unknown
0.129205 - Serial Number: unknown
0.129207 - Bus: /dev/usb
0.129210 - Device release number: 0001
0.129212 Trying to match device
0.129222 Device matches
0.129226 nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0)
0.197019 Trying megatec protocol…
0.197030 send: Q1
0.265010 read: Unknown error
0.265017 Permissions problem: Input/output errorI see another person had this problem with pfsense 2 years ago and got nowhere.
-
Try setting it to APC Back-UPS USB
It works for me with a CyberPower UPS…