Wan't to route specific LAN host out of different gateway

BKKCH

I wan't one specific LAN host, to be routed out through another gateway (an OpenVPN client).
I currently have a Wireless SSID using this OpenVPN client gateway, and it works.
I was under the empression that it was enough to make a FIREWALL RULE on the LAN, but it doesn't work.

Could somebody verify for me what the correct setup for this is?

Thanks.

The rule i made is:
Action: PASS
Interface: LAN
Source: SINGLE HOST (the address of the pc)
Gateway: (the VPN client gateway)

Derelict

That looks good. Clear states and test again.

That rule must also be above any other rule that matches the same traffic to be effective.

BKKCH

Yes, the rule is the top-most. Just before the "default gateway rule" the rest of the LAN uses.

Derelict

Then it should be working. Post your rules.

johnpoz

And do you have way for pfsense to nat that source IP to that vpn connection IP?

BKKCH

Attached are FW LAN rules, and NAT.

I have added log on the .201 rule, but nothing in the log!

FW-LAN.jpg_thumb

NAT.jpg_thumb

BKKCH

I finally solved it. I mixed up two gateways. My mistake.

Thanks for your help and interest. I really appreciate it.