Crash and reboot
-
I don't see anything on the crash reporter server that came from that IP address. Could it have come from another IP address? Or an IPv6 address? I checked for anything even close to that address (in the whole /24) and couldn't find anything.
-
ok my fault switched to the other ip as default geteway 195.58.178.230
crash happend on 03.14.2016 and 03.17.2016
and thx in av -
Both recent crashes were the same:
Fatal trap 12: page fault while in kernel mode cpuid = 3; apic id = 13 fault virtual address = 0xa40c05011c fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff80cf3e20 stack pointer = 0x28:0xfffffe001a3f39c0 frame pointer = 0x28:0xfffffe001a3f3a30 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 12 (swi4: clock)db:0:kdb.enter.default> bt Tracing pid 12 tid 100012 td 0xfffff8000359f000 key_timehandler() at key_timehandler+0xa00/frame 0xfffffe001a3f3a30 softclock_call_cc() at softclock_call_cc+0x177/frame 0xfffffe001a3f3af0 softclock() at softclock+0x94/frame 0xfffffe001a3f3b20 intr_event_execute_handlers() at intr_event_execute_handlers+0xab/frame 0xfffffe001a3f3b60 ithread_loop() at ithread_loop+0x96/frame 0xfffffe001a3f3bb0 fork_exit() at fork_exit+0x9a/frame 0xfffffe001a3f3bf0 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe001a3f3bf0It's crashing in the clock, apparently. I'd be extremely suspicious of that hardware. Check for a BIOS update, run hardware tests, etc.
-
ok thx for your help its a
HP ProLiant SE316M1 with an extra intel dual NIC
Intel(R) Xeon(R) CPU L5520 @ 2.27GHz
Current: 1699 MHz, Max: 2266 MHz
8 CPUs: 2 package(s) x 2 core(s) x 2 SMT threads
16339 MB RAM -
i have send a new crash report (should have come from the same ip as befor)
i am running out of ideas this hp server worked as another system flawless but now as its new incarnation as firewall it randomly reboots.
as sugested i have installed teh newest firmware for the server.[2.2.6-RELEASE][root@grz-gw01-p.sms.local]/root/server-configs: cat /boot/loader.conf.local kern.cam.boot_delay=10000 kern.ipc.nmbclusters="1000000" [2.2.6-RELEASE][root@grz-gw01-p.sms.local]/root/server-configs: cat /boot/loader.conf autoboot_delay="3" vm.kmem_size="435544320" vm.kmem_size_max="535544320" kern.ipc.nmbclusters="0" comconsole_speed="115200" hw.usb.no_pf="1" debug.acpi.disabled="timer"Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.1-RELEASE-p25 #0 c39b63e(releng/10.1)-dirty: Mon Dec 21 15:20:13 CST 2015 root@pfs22-amd64-builder:/usr/obj.RELENG_2_2.amd64/usr/pfSensesrc/src.RELENG_2_2/sys/pfSense_SMP.10 amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz (2266.80-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x106a5 Family = 0x6 Model = 0x1a Stepping = 5 Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt>AMD Features=0x28100800 <syscall,nx,rdtscp,lm>AMD Features2=0x1 <lahf>VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16611590144 (15842 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <hp ="" proliant="">FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 2 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 16 cpu1 (AP): APIC ID: 17 cpu2 (AP): APIC ID: 18 cpu3 (AP): APIC ID: 19 cpu4 (AP): APIC ID: 0 cpu5 (AP): APIC ID: 1 cpu6 (AP): APIC ID: 2 cpu7 (AP): APIC ID: 3 ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20130823/tbfadt-682) ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20130823/tbfadt-682) ioapic1 <version 2.0="">irqs 24-47 on motherboard ioapic0 <version 2.0="">irqs 0-23 on motherboard iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806345e0, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80634690, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80634740, 0) error 1 wlan: mac acl policy registered ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8060ce10, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8060cec0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8060cf70, 0) error 1 random: <software, yarrow="">initialized kbd1 at kbdmux0 cryptosoft0: <software crypto="">on motherboard padlock0: No ACE support. acpi0: <hp proliant="">on motherboard acpi0: Power Button (fixed) cpu0: <acpi cpu="">on acpi0 cpu1: <acpi cpu="">on acpi0 cpu2: <acpi cpu="">on acpi0 cpu3: <acpi cpu="">on acpi0 cpu4: <acpi cpu="">on acpi0 cpu5: <acpi cpu="">on acpi0 cpu6: <acpi cpu="">on acpi0 cpu7: <acpi cpu="">on acpi0 attimer0: <at timer="">port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Event timer "HPET3" frequency 14318180 Hz quality 340 atrtc0: <at realtime="" clock="">port 0x70-0x71 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 pcib0: <acpi host-pci="" bridge="">on acpi0 pci0: <acpi pci="" bus="">on pcib0 pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0 pci2: <acpi pci="" bus="">on pcib1 igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0x4000-0x401f mem 0xfbbe0000-0xfbbfffff,0xfbbc0000-0xfbbdffff,0xfbbb0000-0xfbbb3fff irq 28 at device 0.0 on pci2 igb0: Using MSIX interrupts with 9 vectors igb0: Ethernet address: 98:4b:e1:6d:1a:d0 igb0: Bound queue 0 to cpu 0 igb0: Bound queue 1 to cpu 1 igb0: Bound queue 2 to cpu 2 igb0: Bound queue 3 to cpu 3 igb0: Bound queue 4 to cpu 4 igb0: Bound queue 5 to cpu 5 igb0: Bound queue 6 to cpu 6 igb0: Bound queue 7 to cpu 7 igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0x4020-0x403f mem 0xfbb80000-0xfbb9ffff,0xfbb60000-0xfbb7ffff,0xfbb50000-0xfbb53fff irq 40 at device 0.1 on pci2 igb1: Using MSIX interrupts with 9 vectors igb1: Ethernet address: 98:4b:e1:6d:1a:d1 igb1: Bound queue 0 to cpu 0 igb1: Bound queue 1 to cpu 1 igb1: Bound queue 2 to cpu 2 igb1: Bound queue 3 to cpu 3 igb1: Bound queue 4 to cpu 4 igb1: Bound queue 5 to cpu 5 igb1: Bound queue 6 to cpu 6 igb1: Bound queue 7 to cpu 7 pcib2: <acpi pci-pci="" bridge="">at device 2.0 on pci0 pci14: <acpi pci="" bus="">on pcib2 pcib3: <acpi pci-pci="" bridge="">at device 3.0 on pci0 pci3: <acpi pci="" bus="">on pcib3 em0: <intel(r) 1000="" pro="" network="" connection="" 7.4.2="">port 0x5000-0x501f mem 0xfbce0000-0xfbcfffff,0xfbcc0000-0xfbcdffff irq 24 at device 0.0 on pci3 em0: Using an MSI interrupt em0: Ethernet address: 00:24:81:7e:d4:40 em1: <intel(r) 1000="" pro="" network="" connection="" 7.4.2="">port 0x5020-0x503f mem 0xfbca0000-0xfbcbffff,0xfbc80000-0xfbc9ffff irq 34 at device 0.1 on pci3 em1: Using an MSI interrupt em1: Ethernet address: 00:24:81:7e:d4:41 pcib4: <acpi pci-pci="" bridge="">at device 4.0 on pci0 pci15: <acpi pci="" bus="">on pcib4 pcib5: <acpi pci-pci="" bridge="">at device 5.0 on pci0 pci16: <acpi pci="" bus="">on pcib5 pcib6: <acpi pci-pci="" bridge="">at device 6.0 on pci0 pci17: <acpi pci="" bus="">on pcib6 pcib7: <acpi pci-pci="" bridge="">at device 7.0 on pci0 pci6: <acpi pci="" bus="">on pcib7 ciss0: <hp smart="" array="" p410="">port 0x6000-0x60ff mem 0xfbe00000-0xfbffffff,0xfbdf0000-0xfbdf0fff irq 30 at device 0.0 on pci6 ciss0: PERFORMANT Transport pcib8: <acpi pci-pci="" bridge="">at device 8.0 on pci0 pci18: <acpi pci="" bus="">on pcib8 pcib9: <acpi pci-pci="" bridge="">at device 9.0 on pci0 pci19: <acpi pci="" bus="">on pcib9 pcib10: <acpi pci-pci="" bridge="">at device 10.0 on pci0 pci20: <acpi pci="" bus="">on pcib10 pci0: <base peripheral,="" interrupt="" controller=""> at device 20.0 (no driver attached) pci0: <base peripheral,="" interrupt="" controller=""> at device 20.1 (no driver attached) pci0: <base peripheral,="" interrupt="" controller=""> at device 20.2 (no driver attached) uhci0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">port 0x1000-0x101f irq 20 at device 26.0 on pci0 usbus0 on uhci0 ehci0: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">mem 0xfb8f0000-0xfb8f03ff irq 22 at device 26.7 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 uhci1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">port 0x1020-0x103f irq 20 at device 29.0 on pci0 usbus2 on uhci1 uhci2: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">port 0x1040-0x105f irq 23 at device 29.1 on pci0 usbus3 on uhci2 uhci3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">port 0x1060-0x107f irq 22 at device 29.2 on pci0 usbus4 on uhci3 ehci1: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">mem 0xfb8e0000-0xfb8e03ff irq 20 at device 29.7 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci1 pcib11: <acpi pci-pci="" bridge="">at device 30.0 on pci0 pci1: <acpi pci="" bus="">on pcib11 vgapci0: <vga-compatible display="">port 0x3000-0x30ff mem 0xf0000000-0xf7ffffff,0xfbaf0000-0xfbafffff irq 19 at device 3.0 on pci1 vgapci0: Boot video device uhci4: <uhci (generic)="" usb="" controller="">port 0x3800-0x381f irq 22 at device 4.4 on pci1 usbus6 on uhci4 pci1: <serial bus="">at device 4.6 (no driver attached) isab0: <pci-isa bridge="">at device 31.0 on pci0 isa0: <isa bus="">on isab0 atapci0: <intel ich10="" sata300="" controller="">port 0x1080-0x1087,0x1088-0x108b,0x1090-0x1097,0x1098-0x109b,0x10a0-0x10af,0x10b0-0x10bf irq 17 at device 31.2 on pci0 ata2: <ata channel="">at channel 0 on atapci0 ata3: <ata channel="">at channel 1 on atapci0 atapci1: <intel ich10="" sata300="" controller="">port 0x10c0-0x10c7,0x10c8-0x10cb,0x10d0-0x10d7,0x10d8-0x10db,0x10e0-0x10ef,0x10f0-0x10ff irq 17 at device 31.5 on pci0 ata4: <ata channel="">at channel 0 on atapci1 ata5: <ata channel="">at channel 1 on atapci1 acpi_tz0: <thermal zone="">on acpi0 atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0 atkbd0: <at keyboard="">irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 qpi0: <qpi system="" bus="">on motherboard orm0: <isa option="" roms="">at iomem 0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff,0xcd000-0xcdfff,0xce000-0xd1fff on isa0 sc0: <system console="">at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range uart1: <non-standard ns8250="" class="" uart="" with="" fifos="">at port 0x2f8-0x2ff irq 3 on isa0 est0: <enhanced speedstep="" frequency="" control="">on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est0 attach returned 6 p4tcc0: <cpu frequency="" thermal="" control="">on cpu0 est1: <enhanced speedstep="" frequency="" control="">on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est1 attach returned 6 p4tcc1: <cpu frequency="" thermal="" control="">on cpu1 est2: <enhanced speedstep="" frequency="" control="">on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est2 attach returned 6 p4tcc2: <cpu frequency="" thermal="" control="">on cpu2 est3: <enhanced speedstep="" frequency="" control="">on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est3 attach returned 6 p4tcc3: <cpu frequency="" thermal="" control="">on cpu3 est4: <enhanced speedstep="" frequency="" control="">on cpu4 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est4 attach returned 6 p4tcc4: <cpu frequency="" thermal="" control="">on cpu4 est5: <enhanced speedstep="" frequency="" control="">on cpu5 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est5 attach returned 6 p4tcc5: <cpu frequency="" thermal="" control="">on cpu5 est6: <enhanced speedstep="" frequency="" control="">on cpu6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est6 attach returned 6 p4tcc6: <cpu frequency="" thermal="" control="">on cpu6 est7: <enhanced speedstep="" frequency="" control="">on cpu7 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est7 attach returned 6 p4tcc7: <cpu frequency="" thermal="" control="">on cpu7 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 usbus6: 12Mbps Full Speed USB v1.0 ugen1.1: <intel>at usbus1 uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1 ugen3.1: <intel>at usbus3 uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3 ugen2.1: <intel>at usbus2 uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2 ugen0.1: <intel>at usbus0 uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0 ugen4.1: <intel>at usbus4 uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus4 ugen6.1: <0x103c> at usbus6 uhub5: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen5.1: <intel>at usbus5 uhub6: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus5 uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered ugen6.2: <hp>at usbus6 ukbd0: <virtual keyboard="">on usbus6 kbd2 at ukbd0 uhub0: 6 ports with 6 removable, self powered uhub6: 6 ports with 6 removable, self powered da0 at ciss0 bus 0 scbus0 target 0 lun 0 da0: <hp raid="" 1(1+0)="" ok="">Fixed Direct Access SCSI-5 device da0: Serial Number PACCRID12072G1T da0: 135.168MB/s transfers da0: Command Queueing enabled da0: 139979MB (286677120 512 byte sectors: 255H 32S/T 35132C) SMP: AP CPU #1 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #7 Launched! Timecounter "TSC-low" frequency 1133397542 Hz quality 1000 Trying to mount root from ufs:/dev/da0s1a [rw]... WARNING: / was not properly dismounted vlan0: changing name to 'igb0_vlan60' vlan1: changing name to 'igb0_vlan70' em1: link state changed to UP em1: link state changed to DOWN igb0: link state changed to UP igb0_vlan70: link state changed to UP igb0_vlan60: link state changed to UP em0: link state changed to UP em1: link state changed to UP tun1: changing name to 'ovpns1' tun2: changing name to 'ovpns2' pflog0: promiscuous mode enabled ovpns1: link state changed to UP ovpns2: link state changed to UP igb0: promiscuous mode enabled</hp></virtual></hp></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></non-standard></generic></system></isa></qpi></at></keyboard></thermal></ata></ata></intel></ata></ata></intel></isa></pci-isa></serial></uhci></vga-compatible></acpi></acpi></intel></intel></intel></intel></intel></intel></acpi></acpi></acpi></acpi></acpi></acpi></hp></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></intel(r)></intel(r)></acpi></acpi></acpi></acpi></intel(r)></intel(r)></acpi></acpi></acpi></acpi></at></high></at></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></hp></software></software,></version></version></hp ></lahf></syscall,nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe> -
Crash dump was the same as before, though the key_timehandler() function it references is from IPsec. Do you have any active IPsec tunnels?
Seems like an odd place for it to crash though, still feels like more of a hardware issue.
-
yes i have 2 ipsec tunnels active
i thougt of deactivating the acpi timer i read tat this is sometimes flawd on hp servers. -
i have switched of the use of the acpi timer
and moved back to the bios timer and suddenly the server isnt crashing.so letzt hope that this woraroud solves the problem.
-
since the last info the server crashed 5 times running weeks without Problemes and then reboot 2 times in 5 hours so i think it has something todo with ipsec as you mentined last time. do you have another idee ?
-
…..HP ProLiant SE316M1.....
Some of the HP Proliant servers, including many of the HP Proliant Micro server series are having
problems together with pfSense bare metal installations, pending on chip sets and/or the BIOS.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.