[Solved] Multi NAT
-
Hi all,
I have a little problem and i hope you can help me.
I must change all my ip from 192.168.1.0/24 to 10.52.1.0/24 but i can't do it (i don't have access of the configuration of all peripherals).
So i want to install pfsense for translate in the 2 way :
WAN LAN
SOMETHING TO 10.52.1.2 ==> PFSENSE ==> TO 192.168.1.2
And
SOMEWHERE FROM 10.52.1.20 <== PFSENSE <== TO SOMEWHERE FROM 192.168.1.20I tried 1:1 Nat with this configuration
Virtual IP :
- Address : 192.168.1.0/24
- Interface : WAN
- Type : Proxy ARP
Nat 1:1 : - Interface : Wan
- External IP : 10.52.1.2
- Internal IP : 192.168.1.2
- Destination IP : *
Firewall rules for open all.
And it's works perfectly.
But i want to Nat the entire network in the 2 ways (i don't want to create all 1:1).
I have removed the 1:1 mapping and i tried differents configuration on Outbound but no one works.
Anyone now how to do it ?
-
1:1 NAT has the ability for mapping an entire network.
At "External subnet IP" enter the first external address, at "Internal IP" select Network and enter the first internal address and the subnet mask. -
What's works. Thank you very much