Can't login to WebGUI after a couple of days

vronp

@cmb:

Most if not all remaining instances of 504 gateway timeouts were fixed in 2.3.1_1.

I'm still experiencing the problem with 2.3.1_1

Dave

2chemlud

+1

2.3.1_1 64bit full, especially when re-starting a snort interface.

Intel(R) Atom(TM) CPU D525 @ 1.80GHz 4 CPUs, with 4 GB RAM and 120 GB SSD.

afreaken

I just had this happen at our remote site, not using the ipsec widget.

Netgate SG-2440

2.3.1-RELEASE-p1 (amd64)
built on Wed May 25 14:56:42 CDT 2016

afreaken

@afreaken:

I just had this happen at our remote site, not using the ipsec widget.

Netgate SG-2440

2.3.1-RELEASE-p1 (amd64)
built on Wed May 25 14:56:42 CDT 2016

Just happened to our local pfsense box, same as above (2.3.1_1). Will try to restart the web interface from console.

luckman212

https://redmine.pfsense.org/issues/6396 is marked closed. Is that a different bug, or should it be re-opened? I know there are 502's and 504's going on.

In any case, what is the correct redmine ticket for the remaining issue being discussed here?

edit: I found https://redmine.pfsense.org/issues/6406 which seems to be "this"

afreaken

@luckman212:

https://redmine.pfsense.org/issues/6396 is marked closed. Is that a different bug, or should it be re-opened? I know there are 502's and 504's going on.

In any case, what is the correct redmine ticket for the remaining issue being discussed here?

edit: I found https://redmine.pfsense.org/issues/6406 which seems to be "this"

I'm getting
"504 Gateway Time-out

nginx"

It just seems to happen randomly. Doing the reset from the console fixes it for some time.

My one box was up for ~12 days before it happened, the other was ~9 days. So…

EDIT: The widgets I'm using on both are: System Information, Interfaces, Gateways, Traffic Graphs

Not sure if that helps. Also running ipsec tunnel between locations.

The Brave Sir Robin

Just happened to me. 2.3.1_1. No IPSec or OpenVPN widgets. 20 days uptime. 504 error. I have an IPSec site-to-site running.

:(

OpenVPN server also stops working

Doing an option 16) Restart PHP-FPM did allow me to access the web gui but did not fix OpenVPN. Had to restart OpenVPN server to fix OpenVPN access.

afreaken

Happened again a couple days ago… I want to say this problem has persisted through the "fixes" in 2.3.1_1

Derelict

Do people seeing this with any regularity have anything interesting in the system log? Try filtering on frag.

afreaken

@Derelict:

Do people seeing this with any regularity have anything interesting in the system log? Try filtering on frag.

well… could I make a suggestion, could the "Reset Log Files" button not be the default accept button on the logs settings page, rather than the save button... I was trying to increase the number of logs per page, hit enter and instinctively clicked OK as I read the message, and instantly regretted my decision.

Not sure if this is the same error, but I saw a lot of these in the logs before the above happened.

nginx: 2016/06/20 08:37:47 [error] 18895#0: *1464191 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.1.27, server: , request: "POST /status_ipsec.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "192.168.10.2:445", referrer: "https://192.168.10.2:445/status_ipsec.php"

I see there is an update 5, running update 5 and will report back if it happens again, though it took 9 days of uptime to happen last time.

afreaken

@afreaken:

@Derelict:

Do people seeing this with any regularity have anything interesting in the system log? Try filtering on frag.

well… could I make a suggestion, could the "Reset Log Files" button not be the default accept button on the logs settings page, rather than the save button... I was trying to increase the number of logs per page, hit enter and instinctively clicked OK as I read the message, and instantly regretted my decision.

Not sure if this is the same error, but I saw a lot of these in the logs before the above happened.

nginx: 2016/06/20 08:37:47 [error] 18895#0: *1464191 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.1.27, server: , request: "POST /status_ipsec.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "192.168.10.2:445", referrer: "https://192.168.10.2:445/status_ipsec.php"

I see there is an update 5, running update 5 and will report back if it happens again, though it took 9 days of uptime to happen last time.

UPDATE: 10days 8Hours uptime, hasn't happened yet, so maybe the issue has been resolved between release 1 and release 5?

UPDATE: 22 Days uptime without issue. I'd say whatever caused my specific issue has been resolved.

cmb

@afreaken:

UPDATE: 10days 8Hours uptime, hasn't happened yet, so maybe the issue has been resolved between release 1 and release 5?

Several possibilities for that to happen were fixed between update 1 and 5.

matsan

@cmb:

Several possibilities for that to happen were fixed between update 1 and 5.

Just happened to me in 2.3.1_p5. Same error logged about the thermal sensors and OpenVPN required a restart to allow connections again. I left the WebGUI open during the night on the status screen (my mistake)

nginx: 2016/07/01 06:07:42 [error] 49003#0: *57704 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.17.18, server: , request: "GET /widgets/widgets/thermal_sensors.widget.php?getThermalSensorsData=11467344975628 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "192.168.17.4", referrer: "https://192.168.17.4/"

The first message logged is about the IPSec widget:

2016/07/01 05:11:08 [error] 49003#0: *57391 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.17.18, server: , request: "POST /widgets/widgets/ipsec.widget.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "192.168.17.4", referrer: "https://192.168.17.4/"

Luckily I am able to login using SSH to an internal host and can then go back to the pfsense box and restart php-fpm (option 16) to get the WebGUI restarted and then restart OpenVPN. With vacations coming up I see a lot of calls from colleagues not being able to connect… :'(

odric

Hi I have the same problem. A random day the webgui cant access and OpenVPN Client not connect. (by Ldap valitation, localy i dont test)

I have temporally solution by restart PHP-FPM by ssh local connection (option 16 of menu).

I have some error logs like that:

nginx: 2016/07/05 10:20:50 [error] 29511#0
nginx: 2016/07/05 10:20:49 [error] 29543#0

See attach fille.
It's happens from update 2.2.6 > 2.3.1 and untill 2.3.1-RELEASE-p5 (amd64)

Thanks for your helps
I hope that fix the problem becase if not, i will donwgrade.

pfsenselog2016-07.txt

Artemiy

I have the same problem with the latest version 2.3.1-p5 and the older one
It happen randomly.

Hope will be fixed as soon as possible , can't work this way :'(

vronp

p5 still results in:

504 Gateway Time-Out

vronp

Ugh, please tell me I'm not the only one still getting this.

I'm getting 502 and 504 errors. I do the menu choice 16 reset but the problem returns within about 2 minutes or less.

It seems the 502 is tied to the "initial login" but then I get 504 errors afterward.

FreeBSD 10.3-RELEASE-p5

trlizard

Hello,
I have same problem, cant access 14.14.14.14
I need log file in pfsense server. how can i get log file.

Ekran.jpg_thumb

ekran1.jpg_thumb

trlizard

Web configuration error, while pc is opening.

16.jpg_thumb

web.jpg_thumb

Sashi

I have been having 504 timeout issue since last once week now. No updates and no additional package installed lately. I am currently using pfSense version 2.3.2 with standard settings, pfBlockerNG & Snort is configured and the services are executing as expected.

I am able to access the shell and the firewall is running smooth without any issues. Can someone please shed some light, thanks in advance.

In the meantime, i have changed below values;

max_execution_time = 900 -> /etc/php.ini
request_terminate_timeout = 300 -> /usr/local/etc/php-fpm.conf


2016/08/16 20:42:58 [error] 20217#0: *1 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 10.10.10.101, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "10.10.10.1", referrer: "http://10.10.10.1/"
2016/08/16 21:26:02 [error] 18966#0: *1 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 10.10.10.101, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "10.10.10.1", referrer: "http://10.10.10.1/"
2016/08/16 21:33:05 [error] 18966#0: *5 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 10.10.10.101, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "10.10.10.1", referrer: "http://10.10.10.1/"
2016/08/17 09:51:20 [error] 20268#0: *1 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 10.10.10.101, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "10.10.10.1", referrer: "http://10.10.10.1/"
2016/08/17 16:41:59 [error] 18589#0: *9 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 10.10.10.101, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "10.10.10.1", referrer: "http://10.10.10.1/"
2016/08/17 16:49:59 [error] 18589#0: *20 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 10.10.10.101, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "10.10.10.1", referrer: "http://10.10.10.1/"
2016/08/17 17:13:56 [error] 18589#0: *23 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 10.10.10.101, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "10.10.10.1"