I need a better network. Opinions please!
-
I don't know about 10gbit, but 1 should be no problem I'd guess.
-
I would take the opportunity to audit the situation before transitioning.
How many devices. What kind of devices.
I've recently learned the benefits of segmenting as much as possible to keep protocol broadcast traffic to a minimum.
Actually, just following PCIDSS made the network incredibly faster.
-
I would take the opportunity to audit the situation before transitioning.
How many devices. What kind of devices.
I've recently learned the benefits of segmenting as much as possible to keep protocol broadcast traffic to a minimum.
Actually, just following PCIDSS made the network incredibly faster.
20+ devices, I'd say. Tablets, laptops, desktops, phones, gaming consoles, TVs. The usual stuff.
-
"how does pfSense's UI compare to something like DD-WRT? Will it be easy for someone like me to grasp, or is it Network Engineering level stuff?"
Dude where did you get the idea there was a gui?? ;) Its all done via cli using vi and editing conf files.. You then have to run them through a compiler.. Its really easy peasy stuff you will pick it up in no time ;) ROFL…
status of what is going on is simple to grasp
You can see here that flux capacitor is fully charged and that all the interfaces are online.. j/k
Yes the gui is very simple to use, if you could handle the dd-wrt gui then yeah pfsense is going to just as easy if not easier..
If you have 400$ to spend on pfsense box - why not just buy direct from the store? The SG-2220 is only $299.. But sure you could take that freenas box add some nics and away you go..
Good luck, have fun and remember lots of people here to help!!
-
"how does pfSense's UI compare to something like DD-WRT? Will it be easy for someone like me to grasp, or is it Network Engineering level stuff?"
Dude where did you get the idea there was a gui?? ;) Its all done via cli using vi and editing conf files.. You then have to run them through a compiler.. Its really easy peasy stuff you will pick it up in no time ;) ROFL…
status of what is going on is simple to grasp
You can see here that flux capacitor is fully charged and that all the interfaces are online.. j/k
LOL. Awesome. vi and conf files don't scare me too much though. :)
Yes the gui is very simple to use, if you could handle the dd-wrt gui then yeah pfsense is going to just as easy if not easier..
If you have 400$ to spend on pfsense box - why not just buy direct from the store? The SG-2220 is only $299.. But sure you could take that freenas box add some nics and away you go..
Good luck, have fun and remember lots of people here to help!!
Well, I looked into that, but I figured if I could build something much more powerful for $100 more, I'll just do it, if it all possible. The SG-2220 is kinda weak on specs. I know, it's probably 4x more powerful than my Netgear R6400, but why not go crazy and build something outrageous? I'd also like to build it myself just because I like to build new machines. :D
EDIT: I've also read the 2220 isn't capable of true 1Gbps throughput, which I would like to have. Even the 2440 isn't capable, so I've heard.
-
You will be using a switch as a backbone network, none of the interlan transfers even get to pfsense box at all, so there is no point to invest anything to it. Your AMD A4-5300 have WAY more than enough power to move bytes on 60mbit.
Build with what you have now, if you will be satisfied - you can always upgrade or move to more efficient hardware, assuming what moving configurations between pfsenses is a piece of cake (well, 99.999% times)
-
@pan_2:
You will be using a switch as a backbone network, none of the interlan transfers even get to pfsense box at all, so there is no point to invest anything to it. Your AMD A4-5300 have WAY more than enough power to move bytes on 60mbit.
Build with what you have now, if you will be satisfied - you can always upgrade or move to more efficient hardware, assuming what moving configurations between pfsenses is a piece of cake (well, 99.999% times)
I cannot seem to find my motherboard anywhere…weird. How about the AMD E-350? That was my first FreeNAS CPU a long time ago, and it did an OK job, so I'd imagine it'd be alright for pfSense?
-
1.6Ghz? Sure.
-
@pan_2:
1.6Ghz? Sure.
Thanks. I ordered an AP, a 2nd NIC for the board, and an SSD last night. Only about $180 total including the AP, so well under budget. I'll use that E-350 unless I can find the other mobo somewhere. Should be a good system to try out until I can find an inexpensive 2U or 1U chassis to put it all in.
-
which AP did you order?
-
I like ubiquity….
-
-
Good choice.. I have one of those, the LR and the lite in my house. Very happy with their performance.
-
Can't go wrong with that.