HOW TO NAT 1:1, BUT SERVER DO NOT POINT TO PFSENSE'S GATEWAY?
-
I have a server, was public to the internet over Checkpoint Firewall. (Server point gateway to Checkpoint Lan Interface)
I setup a new Pfsense firewall now, and I want to public that server over pfsense, but can not change default gateway (currently point to Checkpoint Firewall)
DESC:
CheckPoint Firewall:
IP WAN: 192.168.1.2
SM: 255.255.255.0
GW: 192.168.1.1IP LAN: 10.10.10.1
SM: 255.255.255.0Server Info:
IP: 10.10.10.2
SM: 255.255.255.0
Gateway: 10.10.10.1 (CheckPoint LAN interface)Pfsense Info:
IP WAN: 192.168.2.2
SM: 255.255.255.0
GW: 192.168.2.1IP LAN: 10.10.10.11
SM: 255.255.255.0(Sorry for my English)
-
You'll have to source NAT it in that case so the server sees it coming from the LAN IP, not the original IP. Firewall>NAT, Outbound. Hybrid mode, add a rule to NAT traffic on interface LAN, source any, destination IP of the server.
-
Thank admin,
This is my config, IT's WORK !
Steps:
#1/ FIREWALL->NAT 1:1
#2/ FIREWALL->NAT OUTBOUND:
#3/ FIREWALL->RULES->WAN: