IPSec Down after Upgrade to 2.3

augustinermonch

Hi it´s me again, i tryed to use OPENVPN instead of IPSEC
I have the same Problem and my PFSENSE reboot new after 2 min.

Does anyone know this situation ?

Kamyk

Hello everybody!

I have read that thread but unfortunately I have the same issue. We use PfSense 2.3.1 with OpenBGPD+IPsec to Amazon AWS.

We have set that:


net.inet.raw.maxdgram="131072"
net.inet.raw.recvspace="131072"
net.raw.recvspace=65535
net.raw.sendspace=65535

Our IPsec disconnect every couple hours. When I check IPsec status - looks ok, but I can not transfer any packets. I don't have to reboot Firewalls but only stop OpenBGPD and IPsec. Start again and all is working again ok for next couple of hours.

Do you have any idea what I can check more? I didn't check that fix from GitHub. But do you think it could be it?

Thank you for any help or answer.

Best,
Kamyk

olobley

I run a couple of pfsense boxes to link my house to a few neighbors (so hardly mission critical).
Since the upgrade to 2.3, then 2.3.1, then 2.3.1p1, my IPsec tunnels haven't worked.
I don't run OpenBGP (at least I don't think I do) and I tried applying the System Tuneables that jnorell suggested.
I also tried purging all my VPN configurations, and recreating them. Still no love :(
What's odd (at least to me), is that all the tunnels come up in the web interface, but they don't pass traffic.
It's not the end of the world, as I moved to OpenVPN in the interim, however I'd prefer to get back to IPsec.
Thanks in advance

JorgeOliveira

@Kamyk:

I have read that thread but unfortunately I have the same issue. We use PfSense 2.3.1 with OpenBGPD+IPsec to Amazon AWS.

Known issue: https://redmine.pfsense.org/issues/6223

jnorell

@olobley:

Since the upgrade to 2.3, then 2.3.1, then 2.3.1p1, my IPsec tunnels haven't worked.
…
What's odd (at least to me), is that all the tunnels come up in the web interface, but they don't pass traffic.

It sounds like you have a different problem (try enabling cisco extentions in ipsec advanced settings), this one is indicated by 'No buffer space available' errors in the logs.

jnorell

Today, after almost 29 days uptime, we're getting 'error sending to PF_KEY socket: No buffer space available' again .. I'm bumping settings up some more:


net.inet.raw.maxdgram = 131072
net.inet.raw.recvspace = 1048576
net.raw.recvspace = 1048576
net.raw.sendspace = 2097152

mraymond

Hello, new to this forum. Just throwing my hat in the ring for this issue as well. Plagued by "error sending to PF_KEY socket: No buffer space available".
I'm using three IPsec tunnels. One to AWS (with BGP), one to Azure, one to a mikrotik router at a remote office.

Is there a way to effectively restart IPsec and flush that buffer without rebooting?
Restarting the service via the GUI, or manually killing charon and starter and restarting ipsec via terminal does not do it.

EDIT: Of course I should mention this problem started happening after upgrading from 2.2.(6?) to 2.3.1_1
I have increased
net.inet.raw.maxdgram
net.inet.raw.recvspace
net.raw.recvspace
net.raw.sendspace

to recommended values, but have not rebooted since. I will reboot late tonight.

obrienmd

Same issue with upgrade to 2.3.1_5, any idea if this will be resolved in 2.3.2 or 2.4.x (FreeBSD 11, right?)

cmb

Not something we're going to have time for in 2.3.2 (release next week), hopefully it's either resolved already in FreeBSD 11, so 2.4 will be fine, or someone can track down the root cause and get it fixed (my last day here is in two weeks).

2.4 snapshots should be out soon. Help testing then would be appreciated.

Thnadim

i face the same problem when i try to establish a new ipsec site to site vpn between 2 branches with a pfsense with a firmware 2.2.6. I solved that by adding
on the phase 1 proposal (authentication ) the real ip of my peer as it was behind the a nat

My identifier ===== choose Ip address ======= then put your real ip address

and on the Peer Identifier you should put the private ip of the other side if he do the same

Peer identifier ======== ip address =========then put your private ip address

obrienmd

@cmb:

Not something we're going to have time for in 2.3.2 (release next week), hopefully it's either resolved already in FreeBSD 11, so 2.4 will be fine, or someone can track down the root cause and get it fixed (my last day here is in two weeks).

2.4 snapshots should be out soon. Help testing then would be appreciated.

Sure thing, will test as soon as 2.4 snapshots are available! Good luck on your next adventure, and thanks for all the hard work on pfSense :)

owczi

Is anybody aware of any progress on this? Bumping the buffer sizes only extends the issue from a few hours to about two days but that is it.

Also is there any news regarding the root cause? I am struggling to understand the interaction between IPSec (+GRE) and OpenBGPd. Surely the same would happen with any TCP-based application, or is it something that OpenBGPd specifically repeatedly calls on the sockets that causes IPSec to eventually die?

I run a number of tunnels with IPSec + GRE + BGP (pfSense to pfSense and pfSense to Cisco) and since 2.1 they were never really stable. All the way up to 2.3 I had to monitor the GRE tunnels and bounce them after any IPSec re-key or tunnel flap because OpenBGPd was seeing them as invalid next hops. This went away in 2.3, but now IPSec is basically unusable. Doesn't matter why, it makes for an incomplete product. Nobody really runs static routing over non-trivial topologies, and with non-functional BGP, IPSec is only usable for mobile clients. I'm going to give BIRD a try - and migrating the whole network to OSPF is not really an option here, although I will consider it.

Failing that, after many years with pfSense I am going to start looking for alternatives. pfSense is a fantastic platform, and thanks for all the hard work guys, but constant IPSec issues have just about killed it for me.

owczi

…OK, some progress.

Having looked up the PF_KEY rcvbuf error got me a change and a setting introduced in StrongSWAN 5.3.0 where the event socket buffer can be tuned.

Once all IPSec tunnels were dead, I stopped ipsec, stopped openbgpd, then I opened /etc/inc/vpn.inc, searched for the charon { plugins { section and added the following:

....

                kernel-pfkey {

                        events_buffer_size = 1048576

                }

Started ipsec via GUI which re-generated the configs, started openbgpd. Guess what - tunnels came back up, I can see SADs and SPDs again, and some of the BGP sessions are up again (those to Cisco, funny enough). I have now rebooted all pfSense instances and will see how long they will last.

Thanks,
owczi

obrienmd

@owczi:

…OK, some progress.

...

Started ipsec via GUI which re-generated the configs, started openbgpd. Guess what - tunnels came back up, I can see SADs and SPDs again, and some of the BGP sessions are up again (those to Cisco, funny enough). I have now rebooted all pfSense instances and will see how long they will last.

Thanks,
owczi

Still up?

owczi

@obrienmd:

Still up?

Nope - shat itself after about 24 hours. HOWEVER, I don't have to reboot to get the tunnels and BGP sessions back up. The setting I added to charon config may not have anything to do with it. I will keep trying various combinations to get a sensible answer: on some of the pfSense instances I did not have to restart IPSec at all, only bgpd, but it could have been that they had BGP down because of the other peers, and an ipsec restart is still required. I have no time to investigate right now.

Basically:```
/usr/local/etc/rc.d/bgpd.sh stop; ipsec stop; sleep 1; ipsec start; sleep 2; /usr/local/etc/rc.d/bgpd.sh start


I need to write a monitoring script that will do this when all tunnels go down. For now I will just make it a cron job every few hours, maybe even every hour. offset so it doesn't happen on all instances at the same time. This will at least keep me going.

owczi

EDIT: full path for ipsec - required when invoked from cron; do not reset ipsec / bgpd if there are no connections.
EDIT2: fixed to correctly pick up connections when nothing is up and check for buffer errors
Crude as can be, but will do the job… I run this every 5 minutes via a cron job:


#!/bin/sh
estabcount=0
p2count=0
totalcount=0
buferr=0

bounceall() {
/usr/local/etc/rc.d/bgpd.sh stop
sleep 1
$ipsecpath stop
sleep 1
$ipsecpath start
sleep 3
/usr/local/etc/rc.d/bgpd.sh start
}

ipsecpath=/usr/local/sbin/ipsec

echo "=== started at `date` ==="

for con in `$ipsecpath status | grep "\[" | sed 's/\[.*//g' | sort | uniq` ; do 
echo $con
estab=0
p2=0

$ipsecpath status $con | grep ESTAB >/dev/null 2>&1 && estab=1
$ipsecpath status $con | grep INSTALLED >/dev/null 2>&1 && p2=1

[ $estab -eq 1 ] && { 
	echo $con p1 up
	estabcount=$(( $estabcount + 1 ))
	[ $p2 -eq 0 ] && {
	 	echo $con p2 down, restarting
                echo stopping $con...
		$ipsecpath down $con >/dev/null 2>&1
		sleep 1
                echo starting $con...
		$ipsecpath up $con | grep error | grep "buffer space" >/dev/null 2>&1  && { echo "PF_KEY buffer error while starting $con"; buferr=$(( $buferr + 1 )); }
	}

}
[ $estab -eq 0 ] && { echo $con p1 down; }
[ $p2 -eq 1 ] && { echo $con p2 up; p2count=$(( $p2count + 1 )); }
totalcount=$(( $totalcount + 1 ))
done

echo
echo ===
echo estab $estabcount / $totalcount
echo p2 $p2count / $totalcount
echo buf_err $buferr / $totalcount
echo ===
echo

[ $totalcount -gt 0 ] && [ $buferr -gt 0 ] && {
echo $buferr connections show buffer space errors - bouncing openbgpd and ipsec
bounceall
exit
}

[ $totalcount -gt 0 ] && [ $estabcount -eq 0 ] && {
echo no connections have p1 up - bouncing openbgpd and ipsec
bounceall
exit
}

[ $totalcount -gt 0 ] && [ $estabcount -eq $totalcount ] && [ $p2count -eq 0 ] && {
echo all connections have p1 up but no connections have p2 up - bouncing openbgpd and ipsec
bounceall
exit
}

It will bounce all tunnels which have phase 2 down, and if no tunnels have p1 it will bounce ipsec and bgpd. We'll see how long this will last.

obrienmd

How has this worked for you?

owczi

I have just edited the post with the latest version of the script. It didn't work when everything was down, and didn't correctly react to the situation where all P1 is up but no P2 is up. With these modifications This has been working fine for me for the past two weeks or so. It still crashes, but at least it recovers now.

So: The charon setting I added does not fix the problem, but allows you to recover by stopping bgpd, stopping ipsec, starting ipsec and then starting bgpd again - which did not seem possible before. Better than nothing…

owczi

Still going strong - up to 7 days of BGP session uptime, after which IPSec and BGP get restarted once charon starts showing the buffer space errors while attepting to restart tunnels. My setup has got redundancy so this is reliable; obviously a single connection will be impacted, albeit not for long.

EDIT: Some two months later and I have pretty much forgotten about IPSec + OpenBGPD issues. Tunnels occasionally die, but with redundancy I have not experienced a single outage since putting my solution in place. BGP session duration varies, but it is quietly restored whenever the buffer problem rears its ugly head.

obrienmd

Has anyone tried to repro with 2.4 beta?