Dsl and two wifi lans

mpapec · Nov 8, 2005, 8:50 PM

internet
||
city wifi == [ral0 pfsense rl0] == [dsl router] == [win32]

ral0 is 192.168.20.61
rl0 is 192.168.1.3
dsl router is on 192.168.1.1
win32 is 192.168.1.2

I hope this chart make sense. :)

I want to share dsl connection with folks from wifi (I'm on win32 machine).
Is such setup possible, and how should I route packets so I can access wifi/net and give city wifi net access?

tnx!

ZGamer · Nov 8, 2005, 8:54 PM

You would use the wireless just as anyone from the City wifi would. Assuming I'm understanding what your trying to do.

mpapec · Nov 8, 2005, 9:23 PM

Yes, that is my intetntion but doesn't know how to setup routes?

rl0 isn't actually on WAN as it is on my home network.

(DSL router has WAN access)

hoba · Nov 11, 2005, 6:28 PM

Here is how I would do it:

settings at your pfsense:
make rl0 WAN with static config using the LAN IP of your DSL router as gateway
make ral0 LAN
enable DHCP Server at LAN and configure it correctly
enable "advanced outbound nat" at firewall>nat>outbound and delete all rules after you enabled and saved (this way you are routing and don'T NAT any more)
create a rule at WAN to allow access from your dslrouters LAN-subnet
if you want to shut down access for the wifi hosts of your pfsense to your dsl-routers LAN subnet add a rule to block access from source any to destination dsl-routers lansubnet at the lan tab of the pfsense. place this rule above the "default lan to any" rule.

settings at the dsl-router:

add a static route for the wifi subnet of the pfsense with gateway wan ip of your pfsense