Watch Guard XTM 505 Bios Flashing
-
this is my first post here at pfSense
forum i was planning to get a watchguard xtm 505 and get pfsense on it. and i came across this german web page were there is a guide to flashing the Bios so it can be unlocked, and Intel speedstep can be enabled, but i cant make much sense of the bios flashing part can you guys help please.
http://www.triebwerk23.de/joomla/index.php/firewalls/watchguard-xtm-5-xtm-505-515-525-545-pfsense-64-bit
-
https://forum.pfsense.org/index.php?topic=43574.msg639555#msg639555
-
but does the bios need to be flashed if i use hdd instead of cf card for the pfsense os
-
but does the bios need to be flashed if i use hdd instead of cf card for the pfsense os
No it does not need to be flashed.
-
but does the bios need to be flashed if i use hdd instead of cf card for the pfsense os
No it does not need to be flashed.
ok
I have planned to upgrade the 1 gb ram included to 4 gb and a Intel Core 2 Quad Processor Q9300 instead of the celeron does this also work without flashing ?
-
I believe it would. I went to a Q9650 but had flashed before that.
-
How is the temp ?
-
Toasty! ;D
I had to add an AC unit (which broke my heart) to the equipment room here in advance of summer. But it typically runs just north of 50c.
-
ok i got mine yesterday and i swapped mine i also run at 50 +
do you run the newest version of the pfsense on your watchguard ? and can you get the display to work i am total noob at this
-
do you run the newest version of the pfsense on your watchguard ? and can you get the display to work i am total noob at this
Yes I do and Yes I did. ;D
There is a how to floating around for the LCD.
-
i finaly got lcd proc installed but what do i need to set in the lcdproc general settings to get it to work
can you please help me with this
-
I got it to work now I selected the parallel port in general setting and display 2x20
