PfSense can only see 1 NIC out of 3 NIC's on the motherboard
-
Hello, I was wandering if someone can help me on this I been working on this for almost 24hr's now…I'm just about to throw in the towel on this one. I tried everything that i know and that google knows. So this is what i got. I Had this PC laying around that i used for my car PC and now I am setting it up as a firewall for my house. But after installing pfSense 2.3.2 i only can see one out of 3 NIC's that are on the motherboard (see below for system info). I do have the freeBSD drivers but i cant seem to get them installed (see below for driver site). I think the problem is the kernel is not installed but not sure how to do that. I looked at the Hardware Compatibility List from pfSense and they do say they support the NIC card but not sure why only one is working.
Driver Site:
https://downloadcenter.intel.com/download/17509/Intel-Network-Adapter-Gigabit-Base-Driver-for-FreeBSD-Motherboard: MSI Fuzzy 945GM2 mini-ITX
Internal NIC's: 3 NIC's using Intel 82573L Gigabit Ethernet Controller
CPU: T7200 @ 2.00GHz
RAM: 2GB
HardDrive: 60GB SSDThanks,
Steve
-
can you please run the following commands and post their output? This will help us debug your issue.
pciconf -lvbc dmesg -
pciconf -lvbc:
hostb0@pci0:0:0:0: class=0x060000 card=0x27a08086 chip=0x27a08086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub'
class = bridge
subclass = HOST-PCI
cap 09[e0] = vendor (length 9) Intel cap 5 version 1
vgapci0@pci0:0:2:0: class=0x030000 card=0x27a28086 chip=0x27a28086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller'
class = display
subclass = VGA
bar [10] = type Memory, range 32, base 0xfdf00000, size 524288, enabled
bar [14] = type I/O Port, range 32, base 0xff00, size 8, enabled
bar [18] = type Prefetchable Memory, range 32, base 0xd0000000, size 268435456, enabled
bar [1c] = type Memory, range 32, base 0xfdf80000, size 262144, enabled
cap 05[90] = MSI supports 1 message
cap 01[d0] = powerspec 2 supports D0 D3 current D0
hdac0@pci0:0:27:0: class=0x040300 card=0x27d88086 chip=0x27d88086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'NM10/ICH7 Family High Definition Audio Controller'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xfdff8000, size 16384, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 05[60] = MSI supports 1 message, 64 bit enabled with 1 message
cap 10[70] = PCI-Express 1 root endpoint max data 128(128) NS link x0(x0)
ecap 0002[100] = VC 1 max VC1
ecap 0005[130] = Root Complex Link Declaration 1
pcib1@pci0:0:28:0: class=0x060400 card=0x27d08086 chip=0x27d08086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = 'NM10/ICH7 Family PCI Express Port 1'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 1 root port slot max data 128(128) link x1(x1)
speed 2.5(2.5) ASPM disabled(L0s/L1)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x27d08086
cap 01[a0] = powerspec 2 supports D0 D3 current D0
ecap 0002[100] = VC 1 max VC1
ecap 0005[180] = Root Complex Link Declaration 1
pcib2@pci0:0:28:1: class=0x060400 card=0x27d28086 chip=0x27d28086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = 'NM10/ICH7 Family PCI Express Port 2'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 1 root port slot max data 128(128) link x1(x1)
speed 2.5(2.5) ASPM disabled(L0s/L1)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x27d28086
cap 01[a0] = powerspec 2 supports D0 D3 current D0
ecap 0002[100] = VC 1 max VC1
ecap 0005[180] = Root Complex Link Declaration 1
pcib3@pci0:0:28:2: class=0x060400 card=0x27d48086 chip=0x27d48086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = 'NM10/ICH7 Family PCI Express Port 3'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 1 root port slot max data 128(128) link x1(x1)
speed 2.5(2.5) ASPM disabled(L0s/L1)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x27d48086
cap 01[a0] = powerspec 2 supports D0 D3 current D0
ecap 0002[100] = VC 1 max VC1
ecap 0005[180] = Root Complex Link Declaration 1
pcib4@pci0:0:28:3: class=0x060400 card=0x27d68086 chip=0x27d68086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = 'NM10/ICH7 Family PCI Express Port 4'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 1 root port slot max data 128(128) link x0(x1)
speed 0.0(2.5) ASPM disabled(L0s/L1)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x27d68086
cap 01[a0] = powerspec 2 supports D0 D3 current D0
ecap 0002[100] = VC 1 max VC1
ecap 0005[180] = Root Complex Link Declaration 1
uhci0@pci0:0:29:0: class=0x0c0300 card=0x27c88086 chip=0x27c88086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'NM10/ICH7 Family USB UHCI Controller'
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0xfe00, size 32, enabled
uhci1@pci0:0:29:1: class=0x0c0300 card=0x27c98086 chip=0x27c98086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'NM10/ICH7 Family USB UHCI Controller'
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0xfd00, size 32, enabled
uhci2@pci0:0:29:2: class=0x0c0300 card=0x27ca8086 chip=0x27ca8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'NM10/ICH7 Family USB UHCI Controller'
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0xfc00, size 32, enabled
uhci3@pci0:0:29:3: class=0x0c0300 card=0x27ca8086 chip=0x27cb8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'NM10/ICH7 Family USB UHCI Controller'
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0xfb00, size 32, enabled
ehci0@pci0:0:29:7: class=0x0c0320 card=0x27cc8086 chip=0x27cc8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'NM10/ICH7 Family USB2 EHCI Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfdfff000, size 1024, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
pcib5@pci0:0:30:0: class=0x060401 card=0x24488086 chip=0x24488086 rev=0xe2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Mobile PCI Bridge'
class = bridge
subclass = PCI-PCI
cap 0d[50] = PCI Bridge card=0x24488086
isab0@pci0:0:31:0: class=0x060100 card=0x27b98086 chip=0x27b98086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GBM (ICH7-M) LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
cap 09[e0] = vendor (length 12) Intel cap 1 version 0
features: Quick Resume, SATA RAID-5, Mobile, 6 PCI-e x1 slots, SATA RAID-0/1/10
atapci0@pci0:0:31:1: class=0x01018a card=0x27df8086 chip=0x27df8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) IDE Controller'
class = mass storage
subclass = ATA
bar [20] = type I/O Port, range 32, base 0xfa00, size 16, enabled
atapci1@pci0:0:31:2: class=0x01018f card=0x27c48086 chip=0x27c48086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode]'
class = mass storage
subclass = ATA
bar [10] = type I/O Port, range 32, base 0xf900, size 8, enabled
bar [14] = type I/O Port, range 32, base 0xf800, size 4, enabled
bar [18] = type I/O Port, range 32, base 0xf700, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0xf600, size 4, enabled
bar [20] = type I/O Port, range 32, base 0xf500, size 16, enabled
bar [24] = type Memory, range 32, base 0xfdffe000, size 1024, enabled
cap 01[70] = powerspec 2 supports D0 D3 current D0
none0@pci0:0:31:3: class=0x0c0500 card=0x27da8086 chip=0x27da8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'NM10/ICH7 Family SMBus Controller'
class = serial bus
subclass = SMBus
bar [20] = type I/O Port, range 32, base 0x500, size 32, enabled
em0@pci0:1:0:0: class=0x020000 card=0x64201462 chip=0x109a8086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82573L Gigabit Ethernet Controller'
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xfd8e0000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0xbf00, size 32, enabled
cap 01[c8] = powerspec 2 supports D0 D3 current D0
cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
cap 10[e0] = PCI-Express 1 endpoint max data 128(256) RO NS link x1(x1)
speed 2.5(2.5)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 0003[140] = Serial 1 0019dbffff42155cdmesg:
Copyright
1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE-p5 #0 7307492(RELENG_2_3_2): Tue Jul 19 13:29:35 CDT 2016
root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (1995.04-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x6f6 Family=0x6 Model=0xf Stepping=6
Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0xe3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm>AMD Features=0x20100800 <syscall,nx,lm>AMD Features2=0x1 <lahf>VT-x: (disabled in BIOS) HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 2145255424 (2045 MB)
avail memory = 2036326400 (1941 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <intelr awrdacpi="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
random: <software, yarrow="">initialized
ioapic0: Changing APIC ID to 2
ioapic0 <version 2.0="">irqs 0-23 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff806208f0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806209a0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80620a50, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80647bf0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80647ca0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80647d50, 0) error 1
netmap: loaded module
kbd1 at kbdmux0
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
acpi0: <intelr awrdacpi="">on motherboard
acpi0: Power Button (fixed)
cpu0: <acpi cpu="">on acpi0
cpu1: <acpi cpu="">on acpi0
attimer0: <at timer="">port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <at realtime="" clock="">port 0x70-0x73 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <power button="">on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus="">on pcib0
vgapci0: <vga-compatible display="">port 0xff00-0xff07 mem 0xfdf00000-0xfdf7ffff,0xd0000000-0xdfffffff,0xfdf80000-0xfdfbffff irq 16 at device 2.0 on pci0
agp0: <intel 82945gm="" (945gm="" gmch)="" svga="" controller="">on vgapci0
agp0: aperture size is 256M, detected 764k stolen memory
vgapci0: Boot video device
hdac0: <intel 82801g="" hda="" controller="">mem 0xfdff8000-0xfdffbfff irq 16 at device 27.0 on pci0
pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
pci1: <acpi pci="" bus="">on pcib1
em0: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0xbf00-0xbf1f mem 0xfd8e0000-0xfd8fffff irq 16 at device 0.0 on pci1
em0: Using an MSI interrupt
em0: Ethernet address: 00:19:db:42:15:5c
em0: netmap queues/slots: TX 1/1024, RX 1/1024
pcib2: <acpi pci-pci="" bridge="">irq 17 at device 28.1 on pci0
pci2: <acpi pci="" bus="">on pcib2
pcib3: <acpi pci-pci="" bridge="">irq 18 at device 28.2 on pci0
pci3: <acpi pci="" bus="">on pcib3
pcib4: <acpi pci-pci="" bridge="">irq 19 at device 28.3 on pci0
pci4: <acpi pci="" bus="">on pcib4
uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">port 0xfe00-0xfe1f irq 23 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">port 0xfd00-0xfd1f irq 19 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">port 0xfc00-0xfc1f irq 18 at device 29.2 on pci0
usbus2 on uhci2
uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">port 0xfb00-0xfb1f irq 16 at device 29.3 on pci0
usbus3 on uhci3
ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">mem 0xfdfff000-0xfdfff3ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib5: <acpi pci-pci="" bridge="">at device 30.0 on pci0
pci5: <acpi pci="" bus="">on pcib5
isab0: <pci-isa bridge="">at device 31.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <intel ich7="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 31.1 on pci0
ata0: <ata channel="">at channel 0 on atapci0
atapci1: <intel ich7m="" sata150="" controller="">port 0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf50f mem 0xfdffe000-0xfdffe3ff irq 19 at device 31.2 on pci0
ata2: <ata channel="">at channel 0 on atapci1
ata3: <ata channel="">at channel 1 on atapci1
acpi_tz0: <thermal zone="">on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <parallel port="">port 0x378-0x37f,0x778-0x77b irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <parallel port="" bus="">on ppc0
lpt0: <printer>on ppbus0
lpt0: Interrupt-driven port
ppi0: <parallel i="" o="">on ppbus0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 3 on acpi0
uart3: <16550 or compatible> port 0x2e8-0x2ef irq 10 on acpi0
uart4: <16550 or compatible> port 0x4f8-0x4ff irq 5 on acpi0
orm0: <isa option="" roms="">at iomem 0xd0000-0xd0fff,0xef000-0xeffff on isa0
sc0: <system console="">at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
atkbd0: <at keyboard="">irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <enhanced speedstep="" frequency="" control="">on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130c2706000c27
device_attach: est0 attach returned 6
est1: <enhanced speedstep="" frequency="" control="">on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130c2706000c27
device_attach: est1 attach returned 6
Timecounters tick every 1.000 msec
hdacc0: <realtek alc888="" hda="" codec="">at cad 0 on hdac0
hdaa0: <realtek alc888="" audio="" function="" group="">at nid 1 on hdacc0
hdaa0: No presence detection support at nid 27
pcm0: <realtek alc888="" (analog="" 2.0+hp="" 2.0)="">at nid 20,27 and 24,26 on hdaa0
pcm1: <realtek alc888="" (rear="" digital)="">at nid 30 and 31 on hdaa0
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen1.1: <intel>at usbus1
uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
ugen0.1: <intel>at usbus0
uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
ugen3.1: <intel>at usbus3
uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
ugen2.1: <intel>at usbus2
uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
ugen4.1: <intel>at usbus4
uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen1.2: <dell>at usbus1
ukbd0: <dell 0="" 2="" dell="" usb="" entry="" keyboard,="" class="" 0,="" rev="" 1.10="" 1.15,="" addr="">on usbus1
kbd2 at ukbd0
ada0 at ata2 bus 0 scbus1 target 0 lun 0
ada0: <ocz solid="" ssd="" 02.10104="">ATA8-ACS SATA 2.x device
ada0: Serial Number MK01090312B95002F
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 512bytes)
ada0: 61136MB (125206528 512 byte sectors)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1995039972 Hz quality 1000
Trying to mount root from ufs:/dev/ufsid/579ea138b7bee763 [rw]…
em0: link state changed to UP
pflog0: promiscuous mode enabled
arp: 30
a7:1c:3f:99 is using my IP address 192.168.0.182 on em0!
arp: 30a7:1c:3f:99 is using my IP address 192.168.0.182 on em0!</ocz></dell></dell></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></realtek></realtek></realtek></realtek></enhanced></enhanced></at></keyboard></generic></system></isa></parallel></printer></parallel></parallel></thermal></ata></ata></intel></ata></intel></isa></pci-isa></acpi></acpi></intel></intel></intel></intel></intel></acpi></acpi></acpi></acpi></acpi></acpi></intel(r)></acpi></acpi></intel></intel></vga-compatible></acpi></acpi></power></at></at></acpi></acpi></intelr></software></version></software,></intelr></lahf></syscall,nx,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe> -
interesting… do you see the two other ethernet devices via the BIOS? What IRQs do they show up in the BIOS as?
Can you also run these commands as well?
ifconfig -a pciconf -lv -
can you also try adding the following lines to /boot/loader.conf.local (please create this file if it does not already exist)
hint.agp.0.disabled=1 -
lol wow its always the easy think i miss lol . Went into the BIOS and they were disabled wow i feel stupid lol :-[. thanks for the help
-
lol wow its always the easy think i miss lol . Went into the BIOS and they were disabled wow i feel stupid lol :-[. thanks for the help
[/quote]no worries! Happens to the best of us!
