Traffic shaping with Chelsio T520-SO-CR
-
I've setup pfsense 2.3.2 on a Dell PowerEdge R220 with a Chelsio T520-SO-CR 10Gb nic configured with the following interfaces:
WAN (wan) -> cxl1 -> v4: xxx.xxx.xxx.xxx/28
VLAN1 (lan) -> cxl0_vlan1 -> v4: 192.168.1.1/24
VLAN5 (opt1) -> cxl0_vlan5 -> v4: 192.168.5.1/24
VLAN10 (opt2) -> cxl0_vlan10 -> v4: 192.168.10.1/24
VLAN14 (opt3) -> cxl0_vlan14 -> v4: 192.168.14.1/24All working fine except that the Traffic Shaping wizard can't seem to see the WAN interface: the dropdown only lists the vlan interfaces. I'm aware that the nic driver must be compatible with ALTQ for shaping to work and as I understand it, this nic is using the cxgbe driver which is listed as supported on the ALTQ manpage, but I don't know how to verify for certain that this is the driver actually being used.
How can I troubleshoot what is causing this issue, whether it's driver related or something else?
Many thanks,
Joe. -
Is there anyone else with this nic able to use traffic shaping?
-
Have you tried manually creating the ALTQ queues?