IP not showing as VPN IP but mobile phones IP
-
Hello All,
I just got my PFsense setup to be able to connect to my IOS (iPhone/iPad) and Mac using the built in IPSec VPN. When I activate it I get the VPN on the IOS devices and the Mac can also connect when tethering via my IOS device.Now the question I have is when I am VPNing to my firewall the IP address when I do a "what is my IP address" from google is still the mobile device ISP.
I feel I am missing something to have all data back to the PFSense box then go out to the internet? I would expect the IP address that is show to be that of my PFSense box.I appreciate any help.
Thank you
-Ryan -
Do you have 0.0.0.0/0 specified in the phase 2?
-
I do not. (Or I don't believe I do)
Phase 2: Mobile Clients Page
Mode: Tunnel IPv4
Local Network: Lan subnet - Nothing in the address block
Nat/BINAT Translation: None - Nothing in the address block
Description: (blank nothing here)Phase 2 Proposal (SA/Key Exchange)
Protocol: ESPEncryption Algorithms
AES with 256 bits selected
AES256-GCM with auto selected
The rest are uncheckedHash Algorithms:
SHA1, SHA256, SHA384 selected. The rest are uncheckedPFS key group: Off
Lifetime: 3600 secondsAdvanced:
Automatically ping host: (Blank, nothing here)Is there something I should have set here?
-
Try:
Local Network: Network: 0.0.0.0 /0
Set Local Network as desired, e.g. LAN subnet
To pass all traffic, including Internet traffic, across the VPN, set the Local Network to 0.0.0.0/0
-
Sadly that did not work.
I seem to still show the IPv6 address that T-Mobile is providing. I found a site that shows a IPv4 address and it is not my VPN servers IP address either.
I can see the IPv4 addressed machines on my local network when the VPN connects.
I will say I am puzzled.