TP-LINK Smart Switches anyone?

Qinn

You don't want VLAN1 on ports 1-8 untagged at all and
you need VLAN 101 untagged on port2, VLAN102 untagged on port3 and vlan105 untagged on port4.
You probably want VLAN101 (your LAN) untagged on ports 5-8 as well.

Basically, what you're doing is this:
-use EM1 as trunk port (think carrier) that transports the VLANs to your switch. The switch has one port that receives all VLANs TAGGED (port 1 in your case).
-access each VLAN on one port of the switch that has this and only this VLAN UNtagged.

With the tl-link sg108e you cannot remove the untagged 1-8 setting it's grayed out. I have returned this one to the store.

whosmatt

@aleatorvb:

Since this thread is easily found by google I just wanted to add the the "windows java management application" is actually just a java app that can be used in linux too.

To run in ubuntu (for example) you need to:

copy the exe from a windows install to linux

rename exe to .java

install java 8 at minimum:
sudo add-apt-repository ppa:webupd8team/java
sudo apt-get update
sudo apt-get install oracle-java8-installer
enable forwarding
echo 1 > /proc/sys/net/ipv4/ip_forward
use iptables to route udp packets to correct interface
iptables -t nat -A PREROUTING -p udp -d 255.255.255.255 --dport 29809 -j DNAT --to [your ip address]:29809
Tested last night and confirmed to be working

More details here : http://sadevil.org/blog/2015/08/30/managing-tp-link-easy-smart-switches-from-linux/ (i've put the short version here in case that page dissapears)

This is awesome. Thanks!

Qinn

Maybe a stupid Q to ask in a thread that has the name TP-LINK. But has someone a good advise for a reasonable priced switch say 8 ports that has all the "proper settings" so not something stupid like the greyed out VLAN 1 untagged setting on all ports. (Btw the way I had a lot of badpackets with the sg108e)

Guest

Maybe a stupid Q to ask in a thread that has the name TP-LINK. But has someone a good advise for a reasonable priced switch say 8 ports that has all the "proper settings" so not something stupid like the greyed out VLAN 1 untagged setting on all ports. (Btw the way I had a lot of badpackets with the sg108e)

Here in Germany I am using some of the Netgear GS108Tv2 switches for ~65 € with LAG (LACP), VLAN,
mirrored Port and others. It comes in a solid made metal case with proper anti slip gum feeds and is
able to be powered over PoE if needed. The other one is the Netgear ProSAFE M4100-D12G for ~200 €
but more powerful and not silent.

You might also be happy with a Cisco SG200 or SG300 switch with 8 or 10 ports, they are really fine
working and comes with a cool GUI and the SG300 series on top with CLI support and SFP slots.
Its only my feeling about this other may find them not matching or to high in price.

jahonix

@Qinn:

With the tl-link sg108e you cannot remove the untagged 1-8 setting it's grayed out. I have returned this one to the store.

You can once you set another VLAN as default, usually your LAN (if you don't use out-of-band management).

Qinn

@BlueKobold:

Maybe a stupid Q to ask in a thread that has the name TP-LINK. But has someone a good advise for a reasonable priced switch say 8 ports that has all the "proper settings" so not something stupid like the greyed out VLAN 1 untagged setting on all ports. (Btw the way I had a lot of badpackets with the sg108e)

Here in Germany I am using some of the Netgear GS108Tv2 switches for ~65 € with LAG (LACP), VLAN,
mirrored Port and others. It comes in a solid made metal case with proper anti slip gum feeds and is
able to be powered over PoE if needed. The other one is the Netgear ProSAFE M4100-D12G for ~200 €
but more powerful and not silent.

You might also be happy with a Cisco SG200 or SG300 switch with 8 or 10 ports, they are really fine
working and comes with a cool GUI and the SG300 series on top with CLI support and SFP slots.
Its only my feeling about this other may find them not matching or to high in price.

Thanks I bought one GS108Tv2

Qinn

@jahonix:

@Qinn:

With the tl-link sg108e you cannot remove the untagged 1-8 setting it's grayed out. I have returned this one to the store.

You can once you set another VLAN as default, usually your LAN (if you don't use out-of-band management).

You are completely right

buttermilk

@Qinn:

@jahonix:

@Qinn:

With the tl-link sg108e you cannot remove the untagged 1-8 setting it's grayed out. I have returned this one to the store.

You can once you set another VLAN as default, usually your LAN (if you don't use out-of-band management).

You are completely right

Trying to get this sorted…. are you by changing the trunk port to a different PVID than 1? In the SG108E using 802.1q VLANs I do not see a way to set a default. I must be missing something.

Thanks in advance.

jahonix

Every port you don't want to run on VLAN1 (which should be all ports…) needs to have a VLAN > 1.
I don't know the SG108E so I can't tell about a default setting somewhere.

rremingt

@stephenw10:

Well at least that's an answer to the earlier question, there is no web interface on the cheapest model. Disappointing.

Steve

I ran nmap on my Mac laptop against the default IP of 192.168.0.1 and port 80 is open. I tried it and got a login page. After entering admin/admin, I was in and looking at a very usable Web UI!

whosmatt

@rremingt:

@stephenw10:

Well at least that's an answer to the earlier question, there is no web interface on the cheapest model. Disappointing.

Steve

I ran nmap on my Mac laptop against the default IP of 192.168.0.1 and port 80 is open. I tried it and got a login page. After entering admin/admin, I was in and looking at a very usable Web UI!

I have two of the TL-SG108E. The first one I bought, which is V1, does not have a web UI. The second one, V2, does. They are both manageable via the Java app, but only the V2 model is manageable over a browser. Hope this helps someone.

robi

@whosmatt:

I have two of the TL-SG108E. The first one I bought, which is V1, does not have a web UI. The second one, V2, does. They are both manageable via the Java app, but only the V2 model is manageable over a browser.

That's great news!
And it seems to be true also for the smallest model too, which is TL-SG105E! 5 gigabit ports, supports VLANs and does not require any proprietary software! Perfect for multi-LAN setups! Very good price…

garylovesbeer

I actually prefer the java interface.

Found a version that runs on OS X that launches the application without having to launch a vmware Windows session.

dennypage

If anyone is interested, I have a TL-SG2216 and a couple of TL-SG2008 switches that are looking for a good home. Please PM me if interested.

whosmatt

@garylovesbeer:

I actually prefer the java interface.

Found a version that runs on OS X that launches the application without having to launch a vmware Windows session.

Yeah, me too. I really didn't look at the web UI on my V2 until yesterday, just noted that it was there. It's kind of half baked as far as the look and feel (and some of the language). But it's there.

IggyB

Hey fellas, well i posted a new thread about this issue but i'm having no replies on my problem
I thought maybe some of you might know since this is more tp-link switch thread

My TL-SG2210P shuts off power when i plug it into ethernet port on my asus max hero alpha
I tried different cables,ports. same thing shuts off.
Other clients on network have no issues even using same cables.

Beaflag VonRathburg

I've been using two SG2424 switches for years, but have an issue with my setup on one.

pfsense - 2.3.2
SG2424 - Latest Firmware

I don't have a problem configuring LAG interfaces within pfsense; select to create a lag, the ports, and the type. The issue lies when I go into the SG2424 and try to create the LAG group. Ideally, I'd like to create a fail over LAG of three ports to the switch, but it seems that it only supports LACP. If I assign any fail over or round robin as the LAG configuration in pfsense, when I change the interface, the connection drops. If I assign the LAG as LACP, create the the LAG / LACP on the switch (enabled / active), and change the LAN interface to the LAG, it works fine. At some point though, the connection will just cut out and require that I reset the LAN interface to a single port to get the connection back. I've tested this with multiple NICs and motherboard combinations and the behavior appears to be the same. Am I missing something within the switch to get this functionality to work properly? Do the SG24xx line support other forms of LAG other than LACP?

robi

My tip is this (based on what I see in my TL-SG2216):

"FAILOVER" in pfSense corresponds to "Static LAG" in TP-Link
"LOADBALANCE" in pfSense corresponds to "LAG Table" with "SRC IP+DST IP" hash alhorithm in TP-Link
"LACP" in pfSense should correspond to the same on TP-Link

ChefRayB

Howdy Everyone,

( I know this topic hasn't been posted for 90 days but it's an interesting thread that talks about TP Link switches)

Today May 2017, what is the best managed switch to buy for home ?

Criteria:

Running for Home, under TV Cabinet
Fanless, quiet, small, compact and low wattage
Supports VLANs, IGMP Snooping v1,2,3, Inter Vlan Multi broadcasting (DLNA, UPnP)
My project & current setup: https://forum.pfsense.org/index.php?topic=129671.msg716171#msg716171
undecided about POE, perhaps install ubiquiti AP AC lite ( 24V Passive POE)

Question: Which is a good switch for long term ? shouldn't I just buy a TL-SG2008 and upgrade the day I need PoE since TL-Sg2008 is just $70 and I can always power the devices by plugging them in an electric outlet worst case since I won't have many poe devices?

My gut feeling is saying just buy TL-Sg2008, very compact, low wattage, supports VLAN, support Inter VLAN broadcasting and keep it simple, in a few years there will be better switches and $70 depreciation for a few years is not the end of the world. Moreover TL-SG2008 is a better switch for a beginner compared jumping to Cisco SG300 for the 1st jump to VLAN.

Thoughts ?

Switches:

TP TL-SG2008 (Smart Switch, non-PoE) - Selling $70 USD
http://www.tp-link.com/us/products/details/cat-5070_TL-SG2008.html
Size: 8x4x1 (inch)
Electricity : < 7 watts
T2500G-10TS (TL-SG3210) (L2 Managed, non POE) - Selling $120
http://www.tp-link.com/ca/products/details/cat-39_T2500G-10TS.html#specifications
Size: 12x7x2 (inch)
Electricity: < 9 watts
Cisco SG300-10 (non-PoE, L2+L3 Managed) or SG300-10P (PoE + L2+L3 Managed ) - Selling 150-250
http://www.cisco.com/c/en/us/products/collateral/switches/small-business-smart-switches/data_sheet_c78-610061.html
Size: approx 11x7x2 (inch)
Electricity - non PoE: <11 watts
Electricity - PoE: min 14 - max 82 watts (If I don't use POE, it will run approx 14 watts which is double than TP-SG2008)
PoE: 1 port up to 30watts

pfBasic

Check out the Zyxel GS1900-8HP. I just picked one up to replace a SG108E that was throwing up errors for my Ubiquiti AP.

It costs $30 more, but has PoE over all ports with a 70W budget.

It has what appears to be a solid GUI, and you can enable CLI is you want.

It's fanless and small.

You can check out my thread here if interested. https://forum.pfsense.org/index.php?topic=129751.msg717006#msg717006