Connectivity issues on Hyper-V
-
So, here is a very strange one!
I've got PFsense v2.3.2 installed on Hyper-V 2012 R2. The VM is using legacy adapters and can be seen in pfsense as de0, de1 and de2
As a test, I've got the WAN interface connecting on DHCP and it's picking up a DHCP IP just fine. It can ping it's own interface but cannot ping the default gateway or anything on the same VLAN.
I get the same when I configure de1 or de2.I've tried a "pfctl -d" at the cli to see if that would fix things but still no joy. I'm stumped!
10.253.1.204 is the IP it's getting from DHCP.
10.253.1.254 is the DG for that subnet.
-
Silly question, did you disable the default block rules for RFC 1918 addresses?
-
It's a good question. All I've got access to is the CLI so I think I'm good using those IP ranges, certainly it's never been an issue when I've installed on VMWare but if there is a command I can use to be sure and/or test this I'll happily give it a go!!