Triple wan loadbalance and squid
-
Traceroute doesn't go through squid.
-
So the best option is to disable squid or uninstall it to get load balancing working?
-
I already gave you what I feel is the single best option to solve your problem, which is a separate caching node behind the multi-WAN node. That will do exactly what you want.
Other than that, getting firewall-generated traffic to use multi-WAN is going to be difficult if it's possible at all. You might look here:
https://forum.pfsense.org/index.php?topic=66822.msg457770#msg457770
That acl random command might be promising. Never tried it.
-
Am just asking if disabling squid will make load balancing work.
I also have freeRadius2 and captive portal running will that affect load balancing just as squid?
Please answer my first question please because I disabled squid rebooted my machine and it seems load balancing still not working.
-
Yes. Turning off squid should make load balancing work as long as the hosts are connecting through an interface that has the proper gateway groups set on the pass rules.
No, captive portal should not affect your gateway groups. Neither will the auth method for the CP (as in freeradius).
-
Yes I set the rules in the firewall so I have 3 20mbps down so I should get 60mbps down in total running speed test. I am only getting 20mbps alone. What's the matter there?
-
No, you will not. Multi-WAN does not combine connections into one "fatter pipe." It distributes connections among the interfaces so, under load, they are all utilized.
-
Oh I understand now. Thanks very much. So do you know when squid will use gateway groups aka multi-wan?
-
You might look at the acl random I referred to earlier.
-
So that command where should I place it in squid? Be specific please been reading the post and its not clear where to paste it.
-
You will have to do that research yourself or post in the cache/proxy forum that specific question.
-
Ok thanks
