PFSense 2.3.2 - WAN is working, Lan no Internet access but able to PING
-
It's been few days now, figuring out what seems to be the issue in my Setup.
Issue:
Unable to Browser on LAN Side, but able to ping any Public IP.Network Structure:
SKYModem -> PFSense -> Laptop
(111.x.x.169) (111.x.x.172)|(10.x.100.11/24) (10.x.100.20/24|10.x.100.11)- PFSense, able to ping any public IP
- Laptop, able to ping any public IP
- PFSense DNS uses SKY DNS
- Laptop DNS uses PFSense IP
Any Ideas?
Appreciates your help.
-
I had a similar problem, described and resolved here :
https://forum.pfsense.org/index.php?topic=119077.0May be same solution can help ?
Best regards,
Luc -
Can pfSense ping in Diagnostics > Ping to 8.8.8.8 if you set the source address to LAN there??
Can pfSense resolve names in Diagnostics > DNS Lookup ?
What are the DNS servers configured on the clients that cannot browse?
You have a lot of superfluous rules on LAN but nothing that should keep it from working. I would delete all but the bottom two and set the source network to LAN net on the IPv4 rule for consistency.
-
I had a similar problem, described and resolved here :
https://forum.pfsense.org/index.php?topic=119077.0May be same solution can help ?
Best regards,
LucThanks Lucky06480 it worked.
Thanks alot!
Cheers! -
This post is deleted!