Simple port forwarding

kpa

There's a vital piece of information missing here. Is your pfSense behind another NAT router?

heper

or is you isp actively blocking inbound traffic?

tushar

no no nothing blocked my pfsense connected to via isp provided cable modem and pppoe congigured on

am i doing correct port forwarding?

using pfblockerng and squid proxy transparent mode…

johnpoz

well if you have a pppoe interface your interface for the forward wold be the pppoe interface

I would not suggest you open up webgui to the public internet that is for sure. If your not seeing traffic to your IP then its not getting to pfsense, so pfsense could never forward it.

You have rules above your wan rule that blocks pfblocker lists, so that could be blocking it?

So your cable modem is doing the pppoe? And pfsense just gets a public IP on its wan interface connect to your isp device.

tushar

@johnpoz:

well if you have a pppoe interface your interface for the forward wold be the pppoe interface

I would not suggest you open up webgui to the public internet that is for sure. If your not seeing traffic to your IP then its not getting to pfsense, so pfsense could never forward it.

You have rules above your wan rule that blocks pfblocker lists, so that could be blocking it?

So your cable modem is doing the pppoe? And pfsense just gets a public IP on its wan interface connect to your isp device.

i configured pppoe in pfsense, isp cable modem working as bridging doing nothing just act as MODEM

just enabling web gui remote access to test

Stugots

What country are you in? I don't know if any US cable providers that use PPPoE anymore.

tushar

@acascianelli:

What country are you in? I don't know if any US cable providers that use PPPoE anymore.

pppoe in india

tushar

ok after doing long searching googling success forwarded port 8000 and 8008 but failed for port 80 tried many times nothing happened. May be due to pfblockerNG doing something math with it so i decided to change http port for my DVR 80 to 8008. (BTW i changed pfsense webgui http port 80 before using port 80 for DVR).

If anyone know about port 80 whats wrong please update.

On my ios device App for my CCTV camera not working even forwarding port http 8000, so i tried with my trusty android and valla it worked. :) ios you traitor wasted my 2 hours :(

Why i seeing outbound Mapping dim rules can i delete all these?

Thanks acascianelli johnpoz heper kpa

![Screen Shot 2016-10-12 at 10.10.28 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2016-10-12 at 10.10.28 PM.png_thumb)
![Screen Shot 2016-10-12 at 10.10.28 PM.png](/public/imported_attachments/1/Screen Shot 2016-10-12 at 10.10.28 PM.png)
![Screen Shot 2016-10-12 at 10.09.01 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2016-10-12 at 10.09.01 PM.png_thumb)
![Screen Shot 2016-10-12 at 10.09.01 PM.png](/public/imported_attachments/1/Screen Shot 2016-10-12 at 10.09.01 PM.png)
screenshot-192.168.1.1-2016-10-12-22-09-29.png

KOM

If anyone know about port 80 whats wrong please update.

Are you running WebGUI in HTTP mode?…

Derelict

Why is the destination address on your 8008 port forward not WAN address?

The answer is probably here:

https://doc.pfsense.org/index.php/Port_Forward_Troubleshooting

Check the default gateway on the 8008 DVR.

tushar

@KOM:

If anyone know about port 80 whats wrong please update.

Are you running WebGUI in HTTP mode?…

yes sir running pfsense web gui on http port 80 but trying to forward port 80 no success :(

**Why is the destination address on your 8008 port forward not WAN address?

@Derelict ok sir i changed it to Wan Addres**