[SOLVED] intel pro/1000 mt dual port server adapter not working
-
Hmm, do you have the 'block private networks' rule on OPT1 maybe?
You can disable that in Interfaces > OPT1.
Otherwise please give us a screenshot of the firewall rules on OPT1 and the Status > Interfaces page.
Steve
-
I'm very confidant that this is a configuration problem.
pfSense doesnt work "out of the box" as its a full firewall, no comparison to your consumer routers, you need to setup everything from scratch.
I'm at work at the mo, but a quick google and this guide should help you.. if you're still stuck I can give you a hand later this evening.
http://www.cyberciti.biz/faq/how-to-pfsense-configure-network-interface-as-a-bridge-network-switch/
I would suggest undoing anything you've already done and start with fresh rules.
-
I would recommend almost certainly not doing that.
You should not setup multiple ports in a bridge unless you really need that. An internal switch will work much better in the vast majority of circumstances.
The current setup you have with two separate internal /24 subnets should work fine. At the very least you should get that working before moving onto a more complex setup if you need to.
Steve
-
I'm still very novist, could you please help me to understand in which scenario you would use bridge then?
-
https://doc.pfsense.org/index.php/What_is_a_bridged_interface_and_how_would_one_be_used
-
One definite scenario for a bridge is when your ISP brings you a subnet with their equipment and that equipment is locked down so that the subnet assigned to you is terminated on the LAN interface of the router they provide (where you have no access to its configuration). In this scenario your best option is just to install pfSense as a filtering bridge on network segment connected to the LAN inteface of the ISP router.
-
Thank you Guys! For the great assistance. I will take screenshots or just make a video of each page for interfaces /firewall for WAN , LAN, and Firewall for each. I do not have access until tomorrow. Where would you suggest I post the screenshots / video (video if I cannot get whole screen visible)
Thanks again for all your help. I believe it is something simple I am just not seeing, that is why it is driving me crazy
-
Thank you ptt, kpa
-
Hello All Again!
I really appreciate the time you have taken to provide possible solutions to my problem. Several of you asked for screenshots. Because I could not get all the data to display well, I made a short video showing all settings discussed plus ssh-ing into the PfSense box to show a few things there.
The nic card is: Inte; PRO/1000 MT Dual Port Server Adapter PCI/PCI-X version A85412-006
The PC PfSense is installed on is: Dell OPtiplex 740 ; 4 gig ram; hd is 25o gigHere is the link to the video: http://www.screencast.com/t/5ZPOrnhNaijN
If anyone can see a possible solution, you would be elevated to hero status and I'd feed you coffee for a day if you are in eastern North Carolina Had to edit this to include the finest happy meal mcdonalds can provide as well (low budget operation here)
-
Oh Happy Day!
A person noticed the mistake in t he OPT1 firewall rule.
The selection for source was LAN, not OPT1 net. (GAK)
Made the change and now I have internet access!Darn fingers and fuzzy eyeballs staring a screen at 0200…..
A BIG public thank you to PiBa-NL in the ##pfsense chat room on FreeNode.
And, thanks again to all here who did their best to help before I sent the video of the configuration online. If anyone wants to use this video as an example of what NOT to do, it seems it is a good example for that
Thanks again to all!
-
Resolution has bee accomplished. Thanks to all who responded and gave suggestions