DCHP on new VLAN with Cisco switch not working.
-
I've been trying for a while now to get this test network setup and what should be a simple configuration has gotten the better of me. I'm simply trying to get a DHCP address assigned to a laptop on a new VLAN I created and it's not working at all.
I'm running pfSense 2.3.2. On the pfSense I have 2 separate interfaces configured. One for the WAN, one for the LAN.
My physical topology is: ISP box -> pfSense eth0 (WAN) / pfSense eth1 (LAN) -> Cisco 2960-X Switch Port 1 / Cisco 2960-X Switch Port 2 -> Laptop
The pfSense VM has the following config:
eth0 - WAN - xx.xx.xx.xx (ISP static IP address) No VLANs
eth1 - LAN - 192.168.1.1/24 with DHCP server running.
VLAN2 assigned to eth1 - 192.168.2.1/24 with DHCP server running.Firewalls rules are set:
LAN interface allows all IPV4 traffic everywhere.
VLAN2 interface all IPV4 traffic everywhere.Cisco 2960-X is configured as such:
VLAN Name Status Ports
–-- -------------------------------- --------- -------------------------------
1 default active Gi1/0/2, Gi1/0/32 VLAN0002 active Gi1/0/2
interface GigabitEthernet1/0/1
switchport mode trunkinterface GigabitEthernet1/0/2
switchport access vlan 2
switchport mode accessinterface GigabitEthernet1/0/3
switchport mode accessIf I plug the laptop into port 3 of the switch I get a DHCP assigned address of 192.168.1.100 and can access the Internet.
If I plug the laptop into port 2 of the switch which is assigned as VLAN 2 I get nothing. If I manually assign an address to the laptop of 192.168.2.100 I can't access the internet, nor can I ping the gateways.I'm at a loss right now as to what config I've missed as everything seems to be correct.
Thoughts anyone?
-
How is gi1/0/2 both in vlan 1 and vlan 2?
-
My mistake when pruning the information. Pasted VLAN from wrong log. Here's the proper relevant config:
VLAN Name Status Ports
–-- -------------------------------- --------- -------------------------------
1 default active Gi1/0/32 VLAN0002 active Gi1/0/2
interface GigabitEthernet1/0/1
switchport mode trunkinterface GigabitEthernet1/0/2
switchport access vlan 2
switchport mode accessinterface GigabitEthernet1/0/3
switchport mode access