Gratuitous arp from virtual IPs?

ssheikh

Yep, one of my ISPs is doing the same thing. http://forum.pfsense.org/index.php/topic,67006.0.html

Wasted a whole day on this. Cron job to run arping – so be it.

Thanks for posting this.

kejianshi

"They say it's in their router software and can't be changed." So just take it right? Crazy…

So is there a easy way to get pfsense to send ARP on a schedule?

ssheikh

Yeah, this was Charter Cable in LA. Done butting heads with them >:(.

Whipped up this script and I run it from cron.

Pass the gateway name to it as the argument. I don't know how often or if at all the cache on the router ever clears. I am running the script every 13 minutes.


#!/usr/local/bin/php -f

/* $Id$ */
/*
        rc.viparp
        Shahid Sheikh

        requires arping package.
        generates unsolicited arp response to a gateway.
*/

/* parse the configuration and include all functions used below */
require_once("/etc/inc/config.inc");
require_once("/etc/inc/gwlb.inc");
require_once("/etc/inc/interfaces.inc");
require_once("/etc/inc/pkg-utils.inc");

$bad_arp_gw = trim($argv[1], " \n");
$package_name = "arping";
if (is_package_installed($package_name)) {
        $bad_arp_gw_int = lookup_gateway_interface_by_name($bad_arp_gw);
        $bad_arp_gw_ip = lookup_gateway_ip_by_name($bad_arp_gw);
        if (!empty($bad_arp_gw_int)) {
                foreach ($config['virtualip']['vip'] as $vip) {
                        if ($vip['mode'] == "carp" && $vip['interface'] == $bad_arp_gw_int) {
                                $vip_int = "{$vip['interface']}_vip{$vip['vhid']}";
                                $status = get_carp_interface_status($vip_int);
                                if ($status == "MASTER") {
                                        log_error("Sending ARP for CARP VIP {$vip['subnet']}'s MAC to {$bad_arp_gw_ip}");
                                        mwexec("/usr/local/sbin/arping -S {$vip['subnet']} -c 3 {$bad_arp_gw_ip}");
                                }
                        }
                }
        }
} else {
        log_error($package_name . " package is not installed.");
}
?>

Shahid

kejianshi

I don't need but I'll press the thanks button anyway because I'm sure others do need it.

Corn

I fought with my setup for 5 hours before figuring out the problem.

UPC (The Netherlands) seems to have similar problems with their small-business cable subscription. (Cisco EPC3925) After about 20 minutes, the modem/router forgets the CARP V-IP's and only the static IPs associated with the interfaces remain accessible.

Your script helps a lot! Added it to cron, on 5 minutes interval. Works like a charm!

jasonlitka

Why in the world would an ISP think this is a good idea?

hcoin

I'm seeing the same thing with a Cisco cable modem / router. The ISP says pfsense is sending a packet with the interface's MAC but the VIP's address, which they are loading into their ARP table. They are also claiming pfsense is sending a packet with the first VIP's mac address, and the interface's IP. As a result, they send nothing. Just started happening a week ago with no change I know about to pfsense.

hcoin

Here's the culprit:

http://unix.derkeiler.com/Mailing-Lists/FreeBSD/net/2011-10/msg00229.html
"CARP arp replays with wrong src mac" / CARP arp replies with wrong src mac

I'm now working on major rewrite of CARP for FreeBSD 10, and
I'd like to take all related PRs.

http://www.freebsd.org/cgi/query-pr.cgi?pr=141023

In the case of all Cisco routers sent out there by Mediacom. It used to work, it worked two weeks ago, now it doesn't work. The guy who works the noc desk at mediacom doesn't read the RFC, he just complains about alarms going off. In the end, I just need it to work.

roemel

Hi

I've the same issue. I've now adopted the script for pfsense 2.3 and also changes it in that way that it sends the virtual CARP MAC in the gratutious arp instead of the MAC of the physical Interface.


#!/usr/local/bin/php -f

/* $Id$ */
/*
        rc.viparp
        Shahid Sheikh

        requires arping package.
        generates unsolicited arp response to a gateway.
*/
/*
Romeo Benzoni
- adopted to run on 2.3 (get_carp_interface_status changes signature)
- send arp response using the virtual MAC
*/

/* parse the configuration and include all functions used below */
require_once("/etc/inc/config.inc");
require_once("/etc/inc/gwlb.inc");
require_once("/etc/inc/interfaces.inc");
require_once("/etc/inc/pkg-utils.inc");

$bad_arp_gw = trim($argv[1], " \n");
$package_name = "arping";
if (is_package_installed($package_name)) {
        $bad_arp_gw_int = lookup_gateway_interface_by_name($bad_arp_gw);
        $bad_arp_gw_ip = lookup_gateway_ip_by_name($bad_arp_gw);
        if (!empty($bad_arp_gw_int)) {
                foreach ($config['virtualip']['vip'] as $vip) {
                        if ($vip['mode'] == "carp" && $vip['interface'] == $bad_arp_gw_int) {
                                $vip_int = "{$vip['interface']}_vip{$vip['vhid']}";
                                $status = get_carp_interface_status("_vip{$vip['uniqid']}");
                                if ($status == "MASTER") {
                                        $mac = sprintf("00:00:5E:00:01:%02X", $vip['vhid']);
                                        log_error("Sending ARP for CARP VIP {$vip['subnet']}'s MAC $mac to {$bad_arp_gw_ip}");
                                        mwexec("/usr/local/sbin/arping -s $mac -S {$vip['subnet']} -c 3 {$bad_arp_gw_ip}");
                                }
                        }
                }
        }
} else {
        log_error($package_name . " package is not installed.");
}
?>

Regards

Romeo

@ssheikh:

Yeah, this was Charter Cable in LA. Done butting heads with them >:(.

Whipped up this script and I run it from cron.

Pass the gateway name to it as the argument. I don't know how often or if at all the cache on the router ever clears. I am running the script every 13 minutes.

wiki345

Thank you，solve my problem。

[carp] CARP arp replays with wrong src mac
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=141023
Who can patch this problem on freebsd 10 ?

@roemel:

Hi

I've the same issue. I've now adopted the script for pfsense 2.3 and also changes it in that way that it sends the virtual CARP MAC in the gratutious arp instead of the MAC of the physical Interface.

wiki345

Why net.link.ether.inet.carp_mac set to 1,can not fix src mac to carp vip mac?
https://github.com/pfsense/FreeBSD-src/commit/f59b244dc6ec16616ed00a9cf33b4d1fcc839a36

broonu

@wiki345:

Why net.link.ether.inet.carp_mac set to 1,can not fix src mac to carp vip mac?
https://github.com/pfsense/FreeBSD-src/commit/f59b244dc6ec16616ed00a9cf33b4d1fcc839a36

sorry for reviving thi thead, but how to apply this?

nicknack

+1..
Not quite fluent with php, but i saw a specific mac address in the script ?
Where should i put mine ?

( our pfsense, master + slave are just another vm guest, so they have virtio mac addresses. )

@broonu:

@wiki345:

Why net.link.ether.inet.carp_mac set to 1,can not fix src mac to carp vip mac?
https://github.com/pfsense/FreeBSD-src/commit/f59b244dc6ec16616ed00a9cf33b4d1fcc839a36

sorry for reviving thi thead, but how to apply this?

eelco_akker

Install Arping
Install Cron
Save the latest 2.3 script to a php file
Transfer the php file to your pfsense box via winscp (in my case /scripts)
Services, Cron, Add (GATEWAYNAME IS CASESENSITIVE !!!)
/usr/local/bin/php -f /scripts/arp_vip.php GATEWAYNAME

Example

/ 3 * * * * root /usr/local/bin/php -f /scripts/arp_vip.php Ziggo_KELDER_GW

rightnow

Had the same problem with my Virtual IP Aliases. Couldn't get the script working for that so I in hurry needed to change it and simply it for my case. Maybe it can be of use even though its made by a noob.


#!/usr/local/bin/php -f

require_once("/etc/inc/config.inc");
require_once("/etc/inc/gwlb.inc");
require_once("/etc/inc/interfaces.inc");
require_once("/etc/inc/pkg-utils.inc");

$gatewayName = trim($argv[1], " \n");

$packageName = "arping";

if (is_package_installed($packageName)) {
	$gatewayInterface 	= lookup_gateway_interface_by_name($gatewayName);
    $gatewayIp 			= lookup_gateway_ip_by_name($gatewayName);

	if (!empty($gatewayName)) {
		$found = false;
		foreach ($config['virtualip']['vip'] as $vip) {
			if ($vip['interface'] == $gatewayInterface) {
				log_error('Sending ARP for Virtual IP ' . $vip['subnet'] . ' to ' . $gatewayIp);
				mwexec('/usr/local/sbin/arping -S ' . $vip['subnet'] . ' -c 3 ' . $gatewayIp);

				$found = true;
			}
		}

		if (!$found) log_error('Found no Virtual IP tied to this gateway: '  . $gatewayName . '\n');
	} else  {
		log_error('You forgot to supply the Gateway name.');
	}
} else {
		log_error($packageName . " package is not installed.");
}
?>

TitanSystems

Just a bit of help for anyone still dealing with this issue. Here in Chattanooga, TN we have EPB Internet that times out vip's after 4 hours of no arp. This thread has been extremely helpful. It is a bit easier to implement now. If you install the Filer and Cron package from package manager, you can drop this script right into a file and edit if needed. Schedule right from the GUI. No more ssh needed.

The only hiccup I ran into was when I copied the above script, I didn't notice that the <? was missing at the beginning and it kept failing until I hit the shell to see what was happening.

BTW, @rightnow version works perfectly on 2.5.1-RELEASE