DHCP server 2x LAN with Deny unknown clients
-
2.1-RELEASE (amd64)
I have 2x lan on the same network (the same vlan)
DHCP configuration:
LAN1: address range: 10.0.1.180 - 10.0.1.200 with Deny unknown clients
LAN2: address range 172.16.1.10-172.16.1.20 with Deny unknown clientsLan1: 150 static mac addresses + static address
Lan2: only 3 static mac addresses + static address
Why komputer with mac address from list LAN1 got adress from LAN2?I need to divide my network into known and unknown computers.
-
if LAN1 and LAN2 connected to the same switch, and without setting/separating the switch ports into VLANS, it will cause confusion.
-
Thx. All is clear.
-
I created 3 VLANS.
1 10.0.0x
2 172.16.1.x
3 192.168.1.xLan1: 150 static mac addresses + static address (and dynamic adress 10.0.0.200-10.0.0.210)
Lan2: ~50 static mac addresses + static address (and dynamic adress 172.16.1.230-172.16.1.240)
Lan3: DHCP disabled.In LAN2 any komputer from LAN1 are not configured. Why, when i connect any komputer from LAN1 to LAN2 i get adress from dynamic range adress eg 172.16.1.231
The same situastion is in when i connect computer from LAN2 to Lan1.
I would like to these networks were totally separated. In my opinion it should not be.