Forward vpn connection to windows server 2008 R2
-
Good morning!
I have configured my windows server 2008 r2 as a vpn server.
I have tested the configuration from within LAN to ensure I get an ip, authenticate, …. It works.
When I setup my client to use my public ip, which is assigned to pfsense, nothing.
The weird part is that nothing shows up in system log.
So i created my nat anyway, port 500,4500 and esp (http://blogs.technet.com/b/rrasblog/archive/2006/06/14/which-ports-to-unblock-for-vpn-traffic-to-pass-through.aspx)
And asked PFsense to log all packet handled by each of those rules.
and ... Nothing, nothing in any log anywhere, as if I was connecting to a blackhole.
I think what is happening is due to the fact that I had tried to setup lt2p and openvpn setup on my pfsense. I removed all of it, but I have the feeling those removed configuration is causing the issue.
I do not kn ow where to start looking, any thought?
Thank you -
;D
Problem solved. Windows VPN behind NAT how to do it? Don't connect to public ip.