Windows 10 not working with pfsense dhcp

johnpoz

^ as long as they share the db of leases its fine..

As to windows 10 not getting dhcp.. With dok - works just fine.. Did you block dhcp on its firewall ;) Clearly pfsense is sending you a offer and then there is even a request for it.. So you got something else going on..

If there was some issue with pfsense and w10, with such a large % of deployed windows clients.. Don't you think the boards would be screaming with people having issues with dhcp?

Here is a windows 10 client, just got dhcp from pfsense.. Are you on some new build or something that might have dhcp bug? This client is prob a bit behind in builds.. Is it ALL of them? Your not having issues with any other dhcp clients? If your seeing the ack, and you saw the request.. clearly points to client.. You could sniff it post up the conversation and we could see what is going on.. So does the client just continue to send discover and then request? What does the client log say?

Event Viewer
> Applications and Services Logs
> Microsoft
> Windows
> Dhcp-Client
> Microsoft-Windows-DHCP Client Events/Admin

win10clientdhcp.png_thumb

jahonix

This is a known problem with Windows 10 and has nothing to do with pfSense.
Wait for a fix from Redmond, maybe this next patchday?

https://answers.microsoft.com/en-us/windows/forum/windows_10-networking/problems-connecting-to-the-internet/f121306e-fab5-411d-833f-e4490ecb8b5c

Try:
ipconfig /release
ipconfig /renew
from Windows cmd

Do NOT assign a static IP, you might end up with the static and an additional APIPA address and your system happily switching between them all the time.
Here's a german IT magazin's article about it: https://heise.de/-3567942

Inq

Unbelievable, the Microsoft dhcpv6 client is broke since anniversary update. Now they somehow managed to brake the dhcpv4 client.?!

jahonix

Security, it's all about security!
This is to delivering a more secure experience to the user.

Not, you say?

kpa

No problems here at all, my windows 10 machine gets a fully working DHCP lease every time like clockwork.

doktornotor

Well, this clearly is a new M$ low… The problem with some idiotic December hotfix seems so bad that every https://support.microsoft.com/ page displays this banner:

(And no, I am NOT hallucinating.)

johnpoz

Yeah there is article about recent patch that made it worse or sure didn't fix it

http://www.infoworld.com/article/3148845/microsoft-windows/windows-10-anniversary-update-bug-drops-wi-fi-connections.html

Which is why I asked what build your on, my is older build..

Oh its a 1 post wonder - the prob won't even be back.. Guess this is good info for the next shmuck..

markw

Found the problem. The DHCP server was configured to hand out a static classless route (code 121) which is now defunct. It turns out some Linux boxes complained about it too but didn't abort the whole IP setting process as Windows 10 did (without saying why of course, just code 0x79).

Thanks all.

johnpoz

Why would you have been using option 121? that could be used as a work around for clients that are on a transit network to hand them other routes, etc..

But to be honest.. This option is one of those rare ones.. Special cases for sure.. Why would you have setup pfsense dhcp to do that vs just standard option 3? Wouldn't you normally just use option 33 to hand the client static routes?

bimmerdriver

Windows 10 DHCPv6 is still broken, as of Version 1607 (Build 14393.576).

doktornotor

@bimmerdriver:

Windows 10 DHCPv6 is still broken, as of Version 1607 (Build 14393.576).

https://connect.microsoft.com/
https://social.technet.microsoft.com/Forums/en-US/home?category=Windows10ITPro

MikeV7896

FYI regarding the Windows 10 Anniversary DHCPv6 renewal issue… according to the very last post in this MS Technet discussion, the fix will be in the March 2017 monthly update.

dragoangel

In my network i have around 50+ PC with Windows 10, and 20+ PC with Windows 7, and almost no problems (only one: some clients somehowe take duplicate IP, or dont take any IP - it around 3-4 PCs from all lan) with DHCPv6 in Assisted Mode because it use DHCPv6 in managed mode otherwise in fail mode use stateless autoconfiguration. Works just perfect. I'm even haven't IPv6 problems in OpenVPN, if someone need help\manual how to configure it I can post it on new topic.

bimmerdriver

As of version 1607, build 14393.953, which is a regular update, the problem has been fixed.