Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    [SOLVED] APU.2C4 mit Huawei ME909s120

    Scheduled Pinned Locked Moved Deutsch
    25 Posts 5 Posters 8.0k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • X
      xidendt
      last edited by

      Update!

      4G_WAN ist online, allerdings wird das Gateway als offline aufgeführt in auf dem Dashboard.
      Ping von der pfSense gehen sauber raus und auch die Rechner können über Gateway 4G_WAN auf das Internet zugreifen.

      Möglich gemacht habe ich es wie folgt.

      Als init string wurde folgendes eingegeben

      (AT)&F&C1E1S0=0

      &F läd die akteulle Konfiguration von dem Modem Modul, bei mir auf Werksteinstellung zurück gesetzt.

      &C1 fragt die Verbindung zur Gegenstelle ab und gibt den Wert online ggf raus (in meinem Fall wird das signal aber nicht richtig aufgefasst.)

      E1 schaltet den Echo Mode an

      S0=0 schaltet den Lautsprecher aus

      Hier der Auszug aus dem Syslog PPP

      
 Jan 5 11:39:29 	ppp 		[opt6] IFACE: Rename interface ng0 to ppp0
Jan 5 11:39:29 	ppp 		[opt6] IFACE: Up event
Jan 5 11:39:28 	ppp 		[opt6] 10.148.221.143 -> 10.64.64.0
Jan 5 11:39:28 	ppp 		[opt6] IPCP: LayerUp
Jan 5 11:39:28 	ppp 		[opt6] IPCP: state change Ack-Sent --> Opened
Jan 5 11:39:28 	ppp 		[opt6] SECDNS 193.189.244.206
Jan 5 11:39:28 	ppp 		[opt6] PRIDNS 193.189.244.225
Jan 5 11:39:28 	ppp 		[opt6] IPADDR 10.148.221.143
Jan 5 11:39:28 	ppp 		[opt6] IPCP: rec'd Configure Ack #4 (Ack-Sent)
Jan 5 11:39:28 	ppp 		[opt6] SECDNS 193.189.244.206
Jan 5 11:39:28 	ppp 		[opt6] PRIDNS 193.189.244.225
Jan 5 11:39:28 	ppp 		[opt6] IPADDR 10.148.221.143
Jan 5 11:39:28 	ppp 		[opt6] IPCP: SendConfigReq #4
Jan 5 11:39:28 	ppp 		[opt6] SECDNS 193.189.244.206
Jan 5 11:39:28 	ppp 		[opt6] PRIDNS 193.189.244.225
Jan 5 11:39:28 	ppp 		[opt6] 10.148.221.143 is OK
Jan 5 11:39:28 	ppp 		[opt6] IPADDR 10.148.221.143
Jan 5 11:39:28 	ppp 		[opt6] IPCP: rec'd Configure Nak #3 (Ack-Sent)
Jan 5 11:39:28 	ppp 		[opt6] SECDNS 0.0.0.0
Jan 5 11:39:28 	ppp 		[opt6] PRIDNS 0.0.0.0
Jan 5 11:39:28 	ppp 		[opt6] IPADDR 0.0.0.0
Jan 5 11:39:28 	ppp 		[opt6] IPCP: SendConfigReq #3
Jan 5 11:39:28 	ppp 		[opt6] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Jan 5 11:39:28 	ppp 		[opt6] IPCP: rec'd Configure Reject #2 (Ack-Sent)
Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: LayerFinish
Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: state change Req-Sent --> Stopped
Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: protocol was rejected by peer
Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: protocol IPV6CP was rejected
Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: rec'd Protocol Reject #2 (Opened)
Jan 5 11:39:28 	ppp 		[opt6] SECDNS 0.0.0.0
Jan 5 11:39:28 	ppp 		[opt6] PRIDNS 0.0.0.0
Jan 5 11:39:28 	ppp 		[opt6] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Jan 5 11:39:28 	ppp 		[opt6] IPADDR 0.0.0.0
Jan 5 11:39:28 	ppp 		[opt6] IPCP: SendConfigReq #2
Jan 5 11:39:28 	ppp 		[opt6] IPCP: rec'd Configure Nak #1 (Ack-Sent)
Jan 5 11:39:28 	ppp 		[opt6] IPCP: state change Req-Sent --> Ack-Sent
Jan 5 11:39:28 	ppp 		[opt6] IPCP: SendConfigAck #1
Jan 5 11:39:28 	ppp 		[opt6] IPCP: rec'd Configure Request #1 (Req-Sent)
Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: SendConfigReq #1
Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: state change Starting --> Req-Sent
Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: Up event
Jan 5 11:39:28 	ppp 		[opt6] SECDNS 0.0.0.0
Jan 5 11:39:28 	ppp 		[opt6] PRIDNS 0.0.0.0
Jan 5 11:39:28 	ppp 		[opt6] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Jan 5 11:39:28 	ppp 		[opt6] IPADDR 0.0.0.0
Jan 5 11:39:28 	ppp 		[opt6] IPCP: SendConfigReq #1
Jan 5 11:39:28 	ppp 		[opt6] IPCP: state change Starting --> Req-Sent
Jan 5 11:39:28 	ppp 		[opt6] IPCP: Up event
Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: LayerStart
Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: state change Initial --> Starting
Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: Open event
Jan 5 11:39:28 	ppp 		[opt6] IPCP: LayerStart
Jan 5 11:39:28 	ppp 		[opt6] IPCP: state change Initial --> Starting
Jan 5 11:39:28 	ppp 		[opt6] IPCP: Open event
Jan 5 11:39:28 	ppp 		[opt6] Bundle: Status update: up 1 link, total bandwidth 150000000 bps
Jan 5 11:39:28 	ppp 		[opt6_link0] Link: Join bundle "opt6"
Jan 5 11:39:28 	ppp 		[opt6_link0] Link: Matched action 'bundle "opt6" ""'
Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: authorization successful
Jan 5 11:39:28 	ppp 		[opt6_link0] MESG: Welcome!!
Jan 5 11:39:28 	ppp 		[opt6_link0] CHAP: rec'd SUCCESS #1 len: 13
Jan 5 11:39:28 	ppp 		[opt6_link0] CHAP: sending RESPONSE #1 len: 25
Jan 5 11:39:28 	ppp 		[opt6_link0] CHAP: Using authname "user"
Jan 5 11:39:28 	ppp 		[opt6_link0] Name: "HUAWEI_CHAP_SRVR"
Jan 5 11:39:28 	ppp 		[opt6_link0] CHAP: rec'd CHALLENGE #1 len: 37
Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: LayerUp
Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: auth: peer wants CHAP, I want nothing
Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: state change Ack-Sent --> Opened
Jan 5 11:39:28 	ppp 		[opt6_link0] MAGICNUM 0x6d53d722
Jan 5 11:39:28 	ppp 		[opt6_link0] MRU 1500
Jan 5 11:39:28 	ppp 		[opt6_link0] ACCMAP 0x000a0000
Jan 5 11:39:28 	ppp 		[opt6_link0] PROTOCOMP
Jan 5 11:39:28 	ppp 		[opt6_link0] ACFCOMP
Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: rec'd Configure Ack #1 (Ack-Sent)
Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: state change Req-Sent --> Ack-Sent
Jan 5 11:39:28 	ppp 		[opt6_link0] AUTHPROTO CHAP MD5
Jan 5 11:39:28 	ppp 		[opt6_link0] MAGICNUM 0x00000543
Jan 5 11:39:28 	ppp 		[opt6_link0] MRU 1500
Jan 5 11:39:28 	ppp 		[opt6_link0] ACCMAP 0x00000000
Jan 5 11:39:28 	ppp 		[opt6_link0] PROTOCOMP
Jan 5 11:39:28 	ppp 		[opt6_link0] ACFCOMP
Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: SendConfigAck #1
Jan 5 11:39:28 	ppp 		[opt6_link0] AUTHPROTO CHAP MD5
Jan 5 11:39:28 	ppp 		[opt6_link0] MAGICNUM 0x00000543
Jan 5 11:39:28 	ppp 		[opt6_link0] MRU 1500
Jan 5 11:39:28 	ppp 		[opt6_link0] ACCMAP 0x00000000
Jan 5 11:39:28 	ppp 		[opt6_link0] PROTOCOMP
Jan 5 11:39:28 	ppp 		[opt6_link0] ACFCOMP
Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: rec'd Configure Request #1 (Req-Sent)
Jan 5 11:39:28 	ppp 		[opt6_link0] MAGICNUM 0x6d53d722
Jan 5 11:39:28 	ppp 		[opt6_link0] MRU 1500
Jan 5 11:39:28 	ppp 		[opt6_link0] ACCMAP 0x000a0000
Jan 5 11:39:28 	ppp 		[opt6_link0] PROTOCOMP
Jan 5 11:39:28 	ppp 		[opt6_link0] ACFCOMP
Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: SendConfigReq #1
Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: state change Starting --> Req-Sent
Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: Up event
Jan 5 11:39:28 	ppp 		[opt6_link0] Link: UP event
Jan 5 11:39:28 	ppp 		[opt6_link0] MODEM: chat script succeeded
Jan 5 11:39:28 	ppp 		[opt6_link0] CHAT: Connected at 150000000.
Jan 5 11:39:28 	ppp 		[opt6_link0] CHAT: ATDT*99#
Jan 5 11:39:28 	ppp 		[opt6_link0] CHAT: Dialing server at *99#...
Jan 5 11:39:28 	ppp 		[opt6_link0] CHAT: Detected Custom modem.
Jan 5 11:39:27 	ppp 		[opt6_link0] LCP: LayerStart
Jan 5 11:39:27 	ppp 		[opt6_link0] LCP: state change Initial --> Starting
Jan 5 11:39:27 	ppp 		[opt6_link0] LCP: Open event
Jan 5 11:39:27 	ppp 		[opt6_link0] Link: OPEN event
Jan 5 11:39:27 	ppp 		[opt6] Bundle: Interface ng0 created
Jan 5 11:39:27 	ppp 		web: web is not running
Jan 5 11:39:27 	ppp 		process 45586 started, version 5.8 (root@pfSense_v2_3_2_amd64-pfSense_v2_3_2-job-04 16:03 19-Jul-2016) 

``` 

Stay tuned ;)
      1 Reply Last reply Reply Quote 0
      • M
        mitra7
        last edited by

        Hello, I have a ME909s-120 and a APU2C4 however I only have two devices listed:

        When I try with the /dev/cuau0 it shows:

        Mar 7 01:52:40 ppp [opt5_link0] can't open /dev/cuau0: Device busy
        Mar 7 01:52:40 ppp [opt5_link0] MODEM: Fail to open serial port /dev/cuau0 on speed 115200
        Mar 7 01:52:40 ppp [opt5_link0] Link: DOWN event
        Mar 7 01:52:40 ppp [opt5_link0] LCP: Down event
        Mar 7 01:52:40 ppp [opt5_link0] Link: reconnection attempt 12 in 4 seconds

        When I try with the /dev/cuau1 it shows:

        Mar 7 01:54:00 ppp Multi-link PPP daemon for FreeBSD
        Mar 7 01:54:00 ppp process 92444 started, version 5.8 (root@pfSense_v2_3_2_amd64-pfSense_v2_3_2-job-04 16:03 19-Jul-2016)
        Mar 7 01:54:00 ppp waiting for process 93269 to die…
        Mar 7 01:54:00 ppp caught fatal signal TERM
        Mar 7 01:54:00 ppp [opt5] IFACE: Close event
        Mar 7 01:54:00 ppp [opt5] IPCP: Close event
        Mar 7 01:54:00 ppp [opt5] IPV6CP: Close event
        Mar 7 01:54:01 ppp waiting for process 93269 to die…
        Mar 7 01:54:01 ppp [opt5_link0] LCP: Close event
        Mar 7 01:54:01 ppp [opt5_link0] LCP: state change Starting –> Initial
        Mar 7 01:54:01 ppp [opt5_link0] LCP: LayerFinish
        Mar 7 01:54:02 ppp [opt5] Bundle: Shutdown
        Mar 7 01:54:02 ppp [opt5_link0] Link: Shutdown
        Mar 7 01:54:02 ppp process 93269 terminated
        Mar 7 01:54:02 ppp web: web is not running
        Mar 7 01:54:02 ppp [opt5] Bundle: Interface ng0 created
        Mar 7 01:54:02 ppp [opt5_link0] Link: OPEN event
        Mar 7 01:54:02 ppp [opt5_link0] LCP: Open event
        Mar 7 01:54:02 ppp [opt5_link0] LCP: state change Initial –> Starting
        Mar 7 01:54:02 ppp [opt5_link0] LCP: LayerStart
        Mar 7 01:54:16 ppp [opt5_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
        Mar 7 01:54:16 ppp [opt5_link0] MODEM: chat script failed
        Mar 7 01:54:16 ppp [opt5_link0] Link: DOWN event
        Mar 7 01:54:16 ppp [opt5_link0] LCP: Down event
        Mar 7 01:54:16 ppp [opt5_link0] Link: reconnection attempt 1 in 4 seconds
        Mar 7 01:54:20 ppp [opt5_link0] Link: reconnection attempt 1

        I have the Huawei ME909s-120 on J13 with SIM on Slot 1.

        I have tried the command :

        cu -l /dev/cuau0

        /dev/cuau0: Device busy
        link down

        cu -l /dev/cuau1

        Stale lock on cuau1 PID=92444… overriding.
        Connected

        It stucks, I can't type anything

        1 Reply Last reply Reply Quote 0
        • X
          xidendt
          last edited by

          Hi mitra7,

          you have to put the ME909s-120 Card to the mimiPCIe Slot 2. Read the manuel at page 8 https://pcengines.ch/pdf/apu2.pdf

          cuau0 and cuau1 are only for USB devices.

          change the card to slot 2 and reboot the pfsense. After reboot check if ME909s-120 is detected ant the web Interface

          Interfaces > assign > ppp

          in my case there are 4 other devices, cuau0.0, cuau0.1, cuau0.2,cuau0.3 and cuau0.4

          add a ppp connection with the information of your ISP and check.

          1 Reply Last reply Reply Quote 0
          • M
            mitra7
            last edited by

            http://i.imgur.com/cAvELxL.jpg
            http://i.imgur.com/J9y6XwM.jpg
            http://i.imgur.com/upeKjdV.jpg

            The Mini-PCI Card is detected as the following shows:
            usbconfig dump_device_desc

            ugen1.3: <huawei mobile="" v7r11="" huawei="" technologies="" co.,="" ltd.="">at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA)

            bLength = 0x0012
              bDescriptorType = 0x0001
              bcdUSB = 0x0210
              bDeviceClass = 0x0000  <probed by="" interface="" class="">bDeviceSubClass = 0x0000
              bDeviceProtocol = 0x00ff
              bMaxPacketSize0 = 0x0040
              idVendor = 0x12d1
              idProduct = 0x15c1
              bcdDevice = 0x0102
              iManufacturer = 0x0001  <huawei technologies="" co.,="" ltd.="">iProduct = 0x0002  <huawei mobile="" v7r11="">iSerialNumber = 0x0003  <0123456789ABCDEF>
              bNumConfigurations = 0x0003</huawei></huawei></probed></huawei>

            However no new devices are created on /dev
            I don't understand…

            1 Reply Last reply Reply Quote 0
            • X
              xidendt
              last edited by

              i checked my box and got the same result

              the ME909s-120 is installed at usbus1.

              Without the card i got also only cuau0 and cuau1, beyond i installed the ME909s-120 there are appeared cuau0.0 - cuau0.4 as Link Interfaces.
              but it's only able to connect with cu -l to cuaU0.0 and cuaU0.4 and only with cuaU0.0 it's possible to connect.

              1 Reply Last reply Reply Quote 0
              • M
                mitra7
                last edited by

                Which version of Pfsense do you have?
                I have the nanobsd amd64

                2.3.2-RELEASE-p1 (amd64)
                built on Tue Sep 27 12:13:07 CDT 2016
                FreeBSD 10.3-RELEASE-p5

                1 Reply Last reply Reply Quote 0
                • X
                  xidendt
                  last edited by

                  the current Version

                  pfSense-memstick-2.3.2-RELEASE

                  AMD64 USB Memstick Intaller

                  2.3.2-RELEASE-p1 (amd64)
                  built on Tue Sep 27 12:13:07 CDT 2016
                  FreeBSD 10.3-RELEASE-p9

                  1 Reply Last reply Reply Quote 0
                  • M
                    mitra7
                    last edited by

                    I'll try to change mine to match yours or to a more recent one.

                    1 Reply Last reply Reply Quote 0
                    • X
                      xidendt
                      last edited by

                      @mitra7:

                      I'll try to change mine to match yours or to a more recent one.

                      I'll try to find the right AT command 's for the ME909s-120 ;)

                      1 Reply Last reply Reply Quote 0
                      • X
                        xidendt
                        last edited by

                        Update

                        Verbindung zum Internet bekomme ich über /dev/cuaU0.0, dafür benötige ich lediglich den Befehl &F um dem Modem über den Init string zu sagen das es auf default gesetzt ist.
                        IP bekomme ich zugewiesen und kann auch über das Gateway ins Internet. Habe laut pfSense etwa 150MB über die LTE Leitung gejagt. Beim Speedtest ist mir aufgefallen das ein Ping auf meine IP nicht moglich ist.
                        Und bei meinem Provider WinSim wird zumindest bisher der Traffic auch nicht mitgezählt, was sehr ungewöhnlich ist.

                        Weiterhin bekomme ich das 4G_WAN als Offline angezeigt, was offensichtlich damit zu tun hat das kein Ping durch geht. Den Ping den die pfSense absetzt um zu sehen ob die Leitung online ist verschwindet im Nirvana und kommt nicht zurück.

                        Wenn jemand eine Idee dazu hat…...... Liebend gerne ;)

                        I got a connection to the internet with the device /dev/cuau0.0 and i just need the AT code &F to setup the Modem to default. I got an IP address and it's possible to connect to the internet. i made a speedtest and loaded round about 150MB wit the G4_WAN, but there's one mysterious thing, it's not possible to ping my WAN address an i guess ist's also the reasen why the 4G_WAN is shown offline on the dashboard of the pfsense.

                        i've no idea what i've to do now, if anywhere has an idea ....... your welcome ;)

                        1 Reply Last reply Reply Quote 0
                        • M
                          mitra7
                          last edited by

                          I've updated my PFSense and now I have the FreeBSD 10.3-RELEASE-p9. Now it displays the devices!

                          1 Reply Last reply Reply Quote 0
                          • M
                            mitra7
                            last edited by

                            Now I have Internet connection too!
                            I've checked and in the Gateway Monitoring the WAN shows Down also. I belive that's because my and your ISP blocks ICMP or TCP/UDP in their internal network.
                            Configuring an alternative Monitor IP on System -> Routing -> Gateways -> 4G_WAN (Your WAN Name) might solve the problem.

                            1 Reply Last reply Reply Quote 0
                            • X
                              xidendt
                              last edited by

                              @mitra7:

                              ….....
                              Configuring an alternative Monitor IP on System -> Routing -> Gateways -> 4G_WAN (Your WAN Name) might solve the problem.

                              Thank you, let's try it with a Monitor IP.

                              1 Reply Last reply Reply Quote 0
                              • X
                                xidendt
                                last edited by

                                I got it… temporary

                                I used the the IP Address who print out in the System Log

                                [opt6] IPADDR xx.xx.xx.xx

                                But i guess the IP will change after the next reconnect, i will try it.

                                1 Reply Last reply Reply Quote 0
                                • X
                                  xidendt
                                  last edited by

                                  Every time i connect the 4G_WAN to net i got a IPADDR, but everyone change it every time to the same IP Address

                                  
an 6 09:41:27 	ppp 		[opt6] xx.xx.83.56 -> 10.64.64.0
Jan 6 09:41:27 	ppp 		[opt6] IPCP: LayerUp
Jan 6 09:41:27 	ppp 		[opt6] IPCP: state change Ack-Sent --> Opened
Jan 6 09:41:27 	ppp 		[opt6] SECDNS xx.xx.121.18
Jan 6 09:41:27 	ppp 		[opt6] PRIDNS xx.xx.121.17
Jan 6 09:41:27 	ppp 		[opt6] IPADDR xx.xx.83.56

                                  I checked the IPADDR and its possible to connected from outsite with TCP and UDP. Why does the IP change ervery time to the static one.

                                  I will try to check the default modem settings.

                                  1 Reply Last reply Reply Quote 0
                                  • X
                                    xidendt
                                    last edited by

                                    Update …..

                                    The IP 10.64.64.0 is set as default if the ISP offers no Gateway IP, i found some information about the mystic IP

                                    here some links about it
                                    https://redmine.pfsense.org/issues/5273
                                    https://redmine.pfsense.org/issues/919

                                    Now the question, is it possible to teach the Modem to asking about the Gateway IP?

                                    I can't find anything about the Gateway IP in the manual of the ME909S-120 modem.

                                    Edit:

                                    Another issue is if you use a limited plan the monitor check need round about 2 MiB per day to check the online status…..

                                    1 Reply Last reply Reply Quote 0
                                    • D
                                      DanielFo
                                      last edited by

                                      Danke xidendt!

                                      Mit deinen Infos war es ein Kinderspiel das ME909s-120 auf meinem Intel NUC DC3217IYE zum Laufen zu bekommen.

                                      Hier noch ein paar nützliche Infos für Intel NUC Nutzer:

                                      • mSATA läuft NUR auf dem PCIE_FMC (full size)
                                      • Um das Modem auf dem PCIE_HMC (half size) betreiben zu können, benutze ich einen mPCIE-Extender, wie den P22S-P22F-SIM. Das praktische: SIM-Karten-Slot ist bereits integriert
                                      • Schöne Gehäuse mit passiver Kühlung gibts von akasa, wie das newton (AK-ITX07-BK). Dieses hat bereits 2 Löcher für die Antennen-Buchsen. Dort ist auch genug Platz für den mPCIE-Extender. Das Modem habe ich mit selbstklebendem Wärmeleitpad an das Case geklebt.

                                      Die Leistung des NUC benötige ich, um eine VPN-Verbindung für diverse Streaming-Dienste nutzen zu können. Ich route bestimmte IPs der TVs durch die VPN-Verbindung.

                                      1 Reply Last reply Reply Quote 0
                                      • S
                                        susamlicubuk
                                        last edited by

                                        exactly how did you solve this problem?
                                        I have the same problem

                                        1 Reply Last reply Reply Quote 0
                                        • First post
                                          Last post
                                        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.