Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    [SOLVED] APU.2C4 mit Huawei ME909s120

    Scheduled Pinned Locked Moved Deutsch
    25 Posts 5 Posters 8.0k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mitra7
      last edited by

      http://i.imgur.com/cAvELxL.jpg
      http://i.imgur.com/J9y6XwM.jpg
      http://i.imgur.com/upeKjdV.jpg

      The Mini-PCI Card is detected as the following shows:
      usbconfig dump_device_desc

      ugen1.3: <huawei mobile="" v7r11="" huawei="" technologies="" co.,="" ltd.="">at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA)

      bLength = 0x0012
        bDescriptorType = 0x0001
        bcdUSB = 0x0210
        bDeviceClass = 0x0000  <probed by="" interface="" class="">bDeviceSubClass = 0x0000
        bDeviceProtocol = 0x00ff
        bMaxPacketSize0 = 0x0040
        idVendor = 0x12d1
        idProduct = 0x15c1
        bcdDevice = 0x0102
        iManufacturer = 0x0001  <huawei technologies="" co.,="" ltd.="">iProduct = 0x0002  <huawei mobile="" v7r11="">iSerialNumber = 0x0003  <0123456789ABCDEF>
        bNumConfigurations = 0x0003</huawei></huawei></probed></huawei>

      However no new devices are created on /dev
      I don't understand…

      1 Reply Last reply Reply Quote 0
      • X
        xidendt
        last edited by

        i checked my box and got the same result

        the ME909s-120 is installed at usbus1.

        Without the card i got also only cuau0 and cuau1, beyond i installed the ME909s-120 there are appeared cuau0.0 - cuau0.4 as Link Interfaces.
        but it's only able to connect with cu -l to cuaU0.0 and cuaU0.4 and only with cuaU0.0 it's possible to connect.

        1 Reply Last reply Reply Quote 0
        • M
          mitra7
          last edited by

          Which version of Pfsense do you have?
          I have the nanobsd amd64

          2.3.2-RELEASE-p1 (amd64)
          built on Tue Sep 27 12:13:07 CDT 2016
          FreeBSD 10.3-RELEASE-p5

          1 Reply Last reply Reply Quote 0
          • X
            xidendt
            last edited by

            the current Version

            pfSense-memstick-2.3.2-RELEASE

            AMD64 USB Memstick Intaller

            2.3.2-RELEASE-p1 (amd64)
            built on Tue Sep 27 12:13:07 CDT 2016
            FreeBSD 10.3-RELEASE-p9

            1 Reply Last reply Reply Quote 0
            • M
              mitra7
              last edited by

              I'll try to change mine to match yours or to a more recent one.

              1 Reply Last reply Reply Quote 0
              • X
                xidendt
                last edited by

                @mitra7:

                I'll try to change mine to match yours or to a more recent one.

                I'll try to find the right AT command 's for the ME909s-120 ;)

                1 Reply Last reply Reply Quote 0
                • X
                  xidendt
                  last edited by

                  Update

                  Verbindung zum Internet bekomme ich über /dev/cuaU0.0, dafür benötige ich lediglich den Befehl &F um dem Modem über den Init string zu sagen das es auf default gesetzt ist.
                  IP bekomme ich zugewiesen und kann auch über das Gateway ins Internet. Habe laut pfSense etwa 150MB über die LTE Leitung gejagt. Beim Speedtest ist mir aufgefallen das ein Ping auf meine IP nicht moglich ist.
                  Und bei meinem Provider WinSim wird zumindest bisher der Traffic auch nicht mitgezählt, was sehr ungewöhnlich ist.

                  Weiterhin bekomme ich das 4G_WAN als Offline angezeigt, was offensichtlich damit zu tun hat das kein Ping durch geht. Den Ping den die pfSense absetzt um zu sehen ob die Leitung online ist verschwindet im Nirvana und kommt nicht zurück.

                  Wenn jemand eine Idee dazu hat…...... Liebend gerne ;)

                  I got a connection to the internet with the device /dev/cuau0.0 and i just need the AT code &F to setup the Modem to default. I got an IP address and it's possible to connect to the internet. i made a speedtest and loaded round about 150MB wit the G4_WAN, but there's one mysterious thing, it's not possible to ping my WAN address an i guess ist's also the reasen why the 4G_WAN is shown offline on the dashboard of the pfsense.

                  i've no idea what i've to do now, if anywhere has an idea ....... your welcome ;)

                  1 Reply Last reply Reply Quote 0
                  • M
                    mitra7
                    last edited by

                    I've updated my PFSense and now I have the FreeBSD 10.3-RELEASE-p9. Now it displays the devices!

                    1 Reply Last reply Reply Quote 0
                    • M
                      mitra7
                      last edited by

                      Now I have Internet connection too!
                      I've checked and in the Gateway Monitoring the WAN shows Down also. I belive that's because my and your ISP blocks ICMP or TCP/UDP in their internal network.
                      Configuring an alternative Monitor IP on System -> Routing -> Gateways -> 4G_WAN (Your WAN Name) might solve the problem.

                      1 Reply Last reply Reply Quote 0
                      • X
                        xidendt
                        last edited by

                        @mitra7:

                        ….....
                        Configuring an alternative Monitor IP on System -> Routing -> Gateways -> 4G_WAN (Your WAN Name) might solve the problem.

                        Thank you, let's try it with a Monitor IP.

                        1 Reply Last reply Reply Quote 0
                        • X
                          xidendt
                          last edited by

                          I got it… temporary

                          I used the the IP Address who print out in the System Log

                          [opt6] IPADDR xx.xx.xx.xx

                          But i guess the IP will change after the next reconnect, i will try it.

                          1 Reply Last reply Reply Quote 0
                          • X
                            xidendt
                            last edited by

                            Every time i connect the 4G_WAN to net i got a IPADDR, but everyone change it every time to the same IP Address

                            
an 6 09:41:27 	ppp 		[opt6] xx.xx.83.56 -> 10.64.64.0
Jan 6 09:41:27 	ppp 		[opt6] IPCP: LayerUp
Jan 6 09:41:27 	ppp 		[opt6] IPCP: state change Ack-Sent --> Opened
Jan 6 09:41:27 	ppp 		[opt6] SECDNS xx.xx.121.18
Jan 6 09:41:27 	ppp 		[opt6] PRIDNS xx.xx.121.17
Jan 6 09:41:27 	ppp 		[opt6] IPADDR xx.xx.83.56

                            I checked the IPADDR and its possible to connected from outsite with TCP and UDP. Why does the IP change ervery time to the static one.

                            I will try to check the default modem settings.

                            1 Reply Last reply Reply Quote 0
                            • X
                              xidendt
                              last edited by

                              Update …..

                              The IP 10.64.64.0 is set as default if the ISP offers no Gateway IP, i found some information about the mystic IP

                              here some links about it
                              https://redmine.pfsense.org/issues/5273
                              https://redmine.pfsense.org/issues/919

                              Now the question, is it possible to teach the Modem to asking about the Gateway IP?

                              I can't find anything about the Gateway IP in the manual of the ME909S-120 modem.

                              Edit:

                              Another issue is if you use a limited plan the monitor check need round about 2 MiB per day to check the online status…..

                              1 Reply Last reply Reply Quote 0
                              • D
                                DanielFo
                                last edited by

                                Danke xidendt!

                                Mit deinen Infos war es ein Kinderspiel das ME909s-120 auf meinem Intel NUC DC3217IYE zum Laufen zu bekommen.

                                Hier noch ein paar nützliche Infos für Intel NUC Nutzer:

                                • mSATA läuft NUR auf dem PCIE_FMC (full size)
                                • Um das Modem auf dem PCIE_HMC (half size) betreiben zu können, benutze ich einen mPCIE-Extender, wie den P22S-P22F-SIM. Das praktische: SIM-Karten-Slot ist bereits integriert
                                • Schöne Gehäuse mit passiver Kühlung gibts von akasa, wie das newton (AK-ITX07-BK). Dieses hat bereits 2 Löcher für die Antennen-Buchsen. Dort ist auch genug Platz für den mPCIE-Extender. Das Modem habe ich mit selbstklebendem Wärmeleitpad an das Case geklebt.

                                Die Leistung des NUC benötige ich, um eine VPN-Verbindung für diverse Streaming-Dienste nutzen zu können. Ich route bestimmte IPs der TVs durch die VPN-Verbindung.

                                1 Reply Last reply Reply Quote 0
                                • S
                                  susamlicubuk
                                  last edited by

                                  exactly how did you solve this problem?
                                  I have the same problem

                                  1 Reply Last reply Reply Quote 0
                                  • First post
                                    Last post
                                  Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.