Overheating - Zbox CI323 nano
-
-
-
Sounds like good reason to avoid any of their products in future.
-
I looked at this unit but the Realtek NICs left me cold.
-
-
@KOM:
I looked at this unit but the Realtek NICs left me cold.
Honestly the unit is not bad but not perfect either due to realtek nics
I managed to resolve random "stall" issues by compiling realtek driver in freebsd 10.3 and migrating it over to pfsense
Other then that my WAN is only 11mbit and can't push the box to it's max. Perfect for Aussie internet haha
I do wish i went for atom x8 core with intel nics
-
@KOM:
the Realtek NICs left me cold.
You probably have better thermal pads than Zotac ;D :D
Ouch! ;D
But yeah in general thermal pads are terrible compared to paste and the thicker they are the worse. Manufacturers use them because they are easy to fit and the tolerances are huge.
Ideally you want both surfaces mirror smooth and the absolute minimum amount of thermal paste. It should serve only to fill the gaps where the heatsink is not touching.
Steve
-
Yeah, I cannot stand the chewing gum either. One particularly bad "thermal" pad on a GPU made me virtually rip off the chip from the board when trying to remove the heatsink. Ugh. Was virtually like concrete.
:( >:( >:(
-
Hi,
got my Zotac CI323 a couple of days ago. In general I am satisfied with that box, beacuse it´s cheap and as always this have some disadvantage but in general I think for this purpose its good.
I mean you are not going to make use of such kind of device if you need to have 20+ users make use of it (imho).But to get back to the topic….. Why you are using a SSD at all? I installed pfsense on a 16GB Class 10 SD Card an let it boot from there. Temperature on my device is 28°C even when pulling 4k Video from YT (100Mbit down / 6Mbit up)
But just to mention I am using pfsense at home, so no business involved.
Maybe its worth a try, just back up your configuration, install pfsense on SD card, restore it lets see what happens.....
kind regards,
Astronach -
Temperature on my device is 28°C even when pulling 4k Video from YT (100Mbit down / 6Mbit up)
The keyword here being "Australia". When it's ~40°C outside and stick the thing into a rack without fans, it sure like hell won't be 28°C.
Why you are using a SSD at all? I installed pfsense on a 16GB Class 10 SD Card
Not serious, are you? This shit dies in 6 months max. You'd need industrial grade SLC SD cards (~200+ USD) to get anywhere near the most shitty SSD out there.
-
Yeah, if you're running from flash you should use Nano (<2.4) or, since there is no Nano in 2.4+, at the very least move /var and /tmp into RAM using the options in Advanced > MIsc.
Steve
-
put a laptop cooler below and plug it into the usb slot on the back.
-
I'd like to share some information to you guys if you're having heat issues with your ci323 nano
The heat in Australia is crazy currently…
Fellow Australian; where abouts did you purchase the ci323? I am deciding between a CI323 or Qotom 150s/p N3150; however I could not find the CI locally? Great info on the heat issues; it greats pretty warm in SA and ave had heat issues with cheap modem/routers.
