Policy based routing, multi-WAN and gateway on same subnet

makz

Do not set a gateway on those

Hi,
Thank you for your reply

Not sure I understand well
On which rules ? Because we do not find where to modify the hidden rules.
And if you mean on the floating rules, then where to set the gateway if not in advanced options of these rules?

Thank you for advance

jimp

Use a static route

jimp

Or policy route on LAN rules

gslongo

@jimp:

Or policy route on LAN rules

Hi Jim,

Static routes are not possible in that case
We already tried same rule on LAN interface but same behavior. And if I understand well the solution shoud be a floating rule ? But then why it is not working in that case ?
We tried every possible scenarios (I think) this is why at the end we opened a bug on the bug tracker.

Thank you!

jimp

You need both.
Policy route on LAN rule, quick out floating rule.

gslongo

@jimp:

You need both.
Policy route on LAN rule, quick out floating rule.

I'm sorry to say that but already tried :-( Just validated right now again..
The most strange is the floating route matches because packet count get incremented… But traceroute shows routing path is not correct...
So as a summary :

Floating rule quick in+out with gateway option
LAN rule with gateway option

Is that right ?

jimp

No. Just exactly what I wrote.

gslongo

@jimp:

No. Just exactly what I wrote.

:o

I'm sorry to ask again but your answers are very short and not clear to me :-[ I'm not inside your head ;D

Could you please just describe what should work ? Because it seems what we tested here is according what you suggested ?

Thanks!

jimp

Pass rule on LAN with gateway set.
Floating quick pass out on WAN without gateway set.

makz

@jimp:

Pass rule on LAN with gateway set.
Floating quick pass out on WAN without gateway set.

Hello, i tried that but still not working, maybe i miss something but i don't know what, screenshots in attachments

anchor "userrules/*" all
pass out quick on lagg0_vlan2000 reply-to (lagg0_vlan2000 192.168.0.5) inet from <backup_servers> to any flags S/SA keep state label "USER_RULE: TEST ROUTING"
pass in quick on openvpn inet all flags S/SA keep state label "USER_RULE: TEMP"
pass in quick on openvpn inet from any to (self) flags S/SA keep state label "USER_RULE: TEMP"
pass in quick on lagg0_vlan2000 reply-to (lagg0_vlan2000 192.168.0.5) inet proto tcp from any to (self) port = https flags S/SA keep state label "USER_RULE: Easy Rule: Passed from Firewall Log View"
pass in quick on lagg0_vlan2000 reply-to (lagg0_vlan2000 192.168.0.5) inet proto tcp from <itop_public_ip> to (self) port = rsh-spx flags S/SA keep state label "USER_RULE"
pass in quick on lagg0_vlan2000 reply-to (lagg0_vlan2000 192.168.0.5) inet proto tcp from <itop_public_ip> to (self) port = https flags S/SA keep state label "USER_RULE"
pass in quick on lagg0_vlan2000 reply-to (lagg0_vlan2000 192.168.0.5) inet proto tcp from any to (self) port = rsh-spx flags S/SA keep state label "USER_RULE: Easy Rule: Passed from Firewall Log View"
pass in quick on lagg0_vlan1007 inet proto carp from any to (self) keep state label "USER_RULE: CARP ALLOWED"
pass in quick on lagg0_vlan1007 inet proto pfsync from any to (self) keep state label "USER_RULE: PFSYNC ALLOWED"
pass in quick on lagg0_vlan2010 inet proto tcp from any to (self) port = http flags S/SA keep state label "USER_RULE: WEB INTERFACE"
pass in quick on lagg0_vlan2010 inet proto tcp from any to (self) port = https flags S/SA keep state label "USER_RULE: WEB INTERFACE"
pass in quick on lagg0_vlan2010 inet proto tcp from any to (self) port = rsh-spx flags S/SA keep state label "USER_RULE: SSH"
pass in quick on lagg0_vlan2010 inet proto icmp from any to (self) keep state label "USER_RULE"
pass in quick on lagg0_vlan2010 inet from any to <hq_lans> flags S/SA keep state label "USER_RULE: oldlan2hqlans"
block drop in quick on lagg0_vlan2010 inet from any to <lans_rfc1918> label "USER_RULE: LAST RULE-1"
pass in quick on lagg0_vlan1008 inet from <backup_servers> to <negate_networks> flags S/SA keep state label "NEGATE_ROUTE: Negate policy routing for destination"
pass in quick on lagg0_vlan1008 route-to (lagg0_vlan2000 192.168.0.1) inet from <backup_servers> to any flags S/SA keep state label "USER_RULE: TEST ROUTING"</backup_servers></negate_networks></backup_servers></lans_rfc1918></hq_lans></itop_public_ip></itop_public_ip></backup_servers>

I also tried to disable the auto generated reply-to on the floating rule but still not working

[root@backup ~]# traceroute 8.8.8.8
traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets
 1  gateway (10.10.3.1)  1.169 ms  1.115 ms  1.074 ms
 2  192.168.0.5 (192.168.0.5)  0.459 ms  0.432 ms  0.399 ms^C

Thank you in advance.

lan_rule.png_thumb

floating_rule.png_thumb

jimp

Hmm, that same style rule works when I use it. Try checking "Disable reply-to" on that rule as well.

makz

@jimp:

Hmm, that same style rule works when I use it. Try checking "Disable reply-to" on that rule as well.

As said in the latest message, i already tried this disabling the automatic reply-to. Still not working.

thank you.

jimp

OK, so then something your boxes are sending is not matching that rule, but falling through to the other rule. So compare the two:

default rule:

pass out  route-to ( lagg0_vlan2000 192.168.0.5 ) from 192.168.0.10 to !192.168.0.0/24 tracker 1000008011 keep state allow-opts label "let out anything from firewall host itself"

Your rules (assuming you did disable reply-to):

pass in quick on lagg0_vlan1008 inet from <backup_servers>to <negate_networks>flags S/SA keep state label "NEGATE_ROUTE: Negate policy routing for destination"
pass out quick on lagg0_vlan2000 inet from <backup_servers>to any flags S/SA keep state label "USER_RULE: TEST ROUTING"</backup_servers></negate_networks></backup_servers>

Three things jump out:

#1: The first rule allows packets with ip options, so check that in your floating rule
#2: The first rule does not filter TCP flags, clone that rule and make one that is TCP only but allows any flags
#3: Try disabling the policy route negation rules under System > Advanced, Firewall & NAT tab

makz

@jimp:

OK, so then something your boxes are sending is not matching that rule, but falling through to the other rule. So compare the two:

default rule:
pass out  route-to ( lagg0_vlan2000 192.168.0.5 ) from 192.168.0.10 to !192.168.0.0/24 tracker 1000008011 keep state allow-opts label "let out anything from firewall host itself"
Your rules (assuming you did disable reply-to):
pass in quick on lagg0_vlan1008 inet from <backup_servers>to <negate_networks>flags S/SA keep state label "NEGATE_ROUTE: Negate policy routing for destination"
pass out quick on lagg0_vlan2000 inet from <backup_servers>to any flags S/SA keep state label "USER_RULE: TEST ROUTING"</backup_servers></negate_networks></backup_servers> 
Three things jump out:

#1: The first rule allows packets with ip options, so check that in your floating rule
#2: The first rule does not filter TCP flags, clone that rule and make one that is TCP only but allows any flags
#3: Try disabling the policy route negation rules under System > Advanced, Firewall & NAT tab

Thank for the response.

I tried those three things, no one of them works

with or without ip options allowed

Screenshot in attachments

pass out quick on lagg0_vlan2000 inet from <backup_servers>to any flags S/SA keep state allow-opts label "USER_RULE: TEST ROUTING"  # Floating

pass in quick on lagg0_vlan1008 route-to (lagg0_vlan2000 192.168.0.1) inet from <backup_servers>to any flags S/SA keep state allow-opts label "USER_RULE: TEST ROUTING"
pass in quick on lagg0_vlan1008 route-to (lagg0_vlan2000 192.168.0.1) inet proto tcp from <backup_servers>to any flags any keep state allow-opts label "USER_RULE: TEST ROUTING"</backup_servers></backup_servers></backup_servers>

Here's the full dump of pfctl http://pastebin.com/jw4mXLTf

TCP Traceroute

[root@backup ~]# traceroute -T 8.8.8.8
traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets
 1  gateway (10.10.3.1)  1.193 ms  1.143 ms  1.108 ms
 2  192.168.0.5 (192.168.0.5)  0.451 ms  0.433 ms  0.411 ms^C

ICMP Traceroute

[root@backup ~]# traceroute 8.8.8.8
traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets
 1  gateway (10.10.3.1)  1.144 ms  1.094 ms  1.034 ms
 2  192.168.0.5 (192.168.0.5)  0.456 ms  0.407 ms  0.386 ms

thank you in advance

advanced_firewall_nat.png_thumb

floating.png_thumb

lan_any.png_thumb

lan_tcp.png_thumb

jimp

clone the floating rule, not the LAN rule (though it won't hurt).

And in this test you are sure that you are sourcing the traffic from a host in that alias?

makz

@jimp:

clone the floating rule, not the LAN rule (though it won't hurt).

And in this test you are sure that you are sourcing the traffic from a host in that alias?

I tried duplicating the floating rule and set only tcp + any flags, same problem

And yes, the alias is defined

alias.png_thumb

gslongo

Hi Jim,

Regarding all the tests my colleague has made and his results, do you think it could be a bug ?

Thank you :-)