Realtek USB (AXE0) nic: No buffer space available
-
Hi all
I setup a pfsense box with 3 nics:
First 2 are 3com pci nics and works great.
The internal sis 965 nic isn't seen by the system than I added a usb nic:axe0: vendor 0x0b95 product 0x1720, rev 2.00/0.01, addr 2
miibus0: <mii bus="">on axe0
rlphy0: <rtl8201l 10="" 100="" media="" interface="">on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
axe0: Ethernet address: 00:06:4f:0d:b5:34
axe0: if_start running deferred for GiantThe card works but from dmesg I can see a lot of this messages:
axe0: read PHY failed
and after some hours the card stops to work, from ifconfig I can see:
axe0: flags=108c43 <up,broadcast,running,oactive,simplex,multicast,needsgiant>mtu 1500
inet 192.168.100.254 netmask 0xffffff00 broadcast 192.168.100.255
inet6 fe80::206:4fff:fe0d:b534%axe0 prefixlen 64 scopeid 0x1
ether 00:06:4f:0d:b5:34
media: Ethernet autoselect (none)and If I try to ping something:
ping 192.168.100.1
PING 192.168.100.1 (192.168.100.1): 56 data bytes
ping: sendto: No buffer space availablerebooting the pfsense box fix the problem and all return to works normally.
Any idea ?
thanks
Giacomo</up,broadcast,running,oactive,simplex,multicast,needsgiant></rtl8201l></mii>