Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Carp doesn't work after the upgrade

    HA/CARP/VIPs
    3
    6
    3.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • C
      capitangiaco
      last edited by

      Hi all

      I had a setup with two pfsense 1.0.1 with carp, that worked very well.
      I upgraded to 1.2 rc3.

      Now when both firewalls are up after 5min of work carp loose sync and from carp status I can see that few carp ips are in master mode and other in backup mode.

      I have sis nics (5 for each fw)
      From the firewallA console I can see alot of warnings of the watchdog timeout.
      If I turn off the firewallA the B become active and all works great whitout any problem.

      Turning on device polling on firewallA seems to fix the problem, and the carp system work.
      From firewallA dmesg I can see this warning:

      arp_rtrequest: bad gateway 159.213.. (!AF_LINK)
      I have each one for each carp ip

      Must I activate the device polling also in the firewall B ?

      I am very confused….

      Giacomo

      1 Reply Last reply Reply Quote 0
      • S
        sullrich
        last edited by

        Sounds like the newer version of FreeBSD does not like one or more nics on the machine that is reporting the watchdog timeouts.  If you are not using Intel nics I highly suggest switching.

        1 Reply Last reply Reply Quote 0
        • C
          capitangiaco
          last edited by

          @sullrich:

          Sounds like the newer version of FreeBSD does not like one or more nics on the machine that is reporting the watchdog timeouts.  If you are not using Intel nics I highly suggest switching.

          why device polling fix the problem ?
          freebsd guys assume that it can only works in 4.x or 5.x but not >= 6 release

          Giacomo

          1 Reply Last reply Reply Quote 0
          • S
            sullrich
            last edited by

            Humm..  Not really sure. That is most strange.

            So you are saying that enabling polling fixed it??

            1 Reply Last reply Reply Quote 0
            • W
              Waldemar
              last edited by

              Hi!

              I seem to have exactly the same problem. After the upgrade to 1.2 CARP stops working after approximately 10-30 minutes. I think the problem is not CARP itself though, but the network driver. I have a setup with 2 Intel (em) NICs and several VLAN interfaces. Once it fails (it always fails on the WAN interfaces only, strangely, never on the LAN ones), I cannot ping the corresponding interface IPs from firewall A to B and vice versa. I can however ping the gateways (which are in the same subnets) from both. Luckily I found this post, and device polling indeed does solve the issue. It is very strange though. It looks like it is an OS problem rather than a pfSense problem.

              Cheers,
              Waldemar

              1 Reply Last reply Reply Quote 0
              • S
                sullrich
                last edited by

                Try reinstalling 1.2 with the SMP kernel.  Does this change the situation?

                1 Reply Last reply Reply Quote 0
                • First post
                  Last post
                Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.