PFSense Not Working with DHCPV6 or Stateless on tracking interface
-
Set the range to something like this:
::eeee:0000:0000:0001 to ::eeee:ffff:ffff:ffff
That's based on a /56 prefix.
-
@marjohn56:
Set the range to something like this:
::eeee:0000:0000:0001 to ::eeee:ffff:ffff:ffff
That's based on a /56 prefix.
Can you explain that one a bit?
-
No…. 8)
Ok, it's effectively the same as setting the dhcp range in IPV4, only much much bigger.
In v4 you would set a range say from 192.168.1.100 to 192.168.1.200, and dhcp would give out addresses in that range.
V6 is the same. The prefix from the ISP may be 48,56,60 whatever, and that is the first 'n' bits of your ipv6 address, you can do what you like with the rest.
So in the example I gave, my prefix is /56, I have an prefix like so: 2a12:2c7f:6130:4d ( not my prefix! ) that's my 56 bit prefix. I then have 128-56 bits to play with, that gives me 72. 72.
Now, my LAN side is really a 64 bit prefix, as the 8 bits after the 56 ISP assigned prefix gives you the option of upto 256 ( or is it 255 ) separate routers should you so wish chained on to the first router.
So we use the last 64 bits as our range on the LAN, a bit excessive I know but it allows you to have loads of fridges, toasters and the IoT all connected. So then we see the last 64 bits of the range are:
::eeee:0000:0000:0001 to ::eeee:ffff:ffff:ffff,
What we are saying there is, the last 64 bits by the :: at the start, everything else prior to that will be either the prefix or 0. If you really wanted you could have a range of
::0000:0000:0000:0001 to ::0000:0000:0000:00fe, giving you 254 addresses, but that would be silly. Even so, I am limiting the range a little by making everything on my LAN ( that uses a dhcp6 assigned address ) start the last 64 bits with eeee, thus limiting the number of dhcp addresses on my LAN to 281474976710655 addresses, not going to run out this week.Does that make sense or is it gibberish, I understand it bit explaining it is never simple.
-
I get what you're trying to say now, but that doesn't really resolve my problem.
DHCPv6 isn't getting a network address, and neither is stateless autoconfig, on a tracking interface.
You're giving me a host address range.
I need to know how to get an automated network address on a tracking interface.
The host address part is easy to deal with.
-
You need to enter the address range, it's not telling what the range is, it's giving you you the limits of the range you can use.
-
@marjohn56:
Set the range to something like this:
::eeee:0000:0000:0001 to ::eeee:ffff:ffff:ffff
That's based on a /56 prefix.
It doesn't matter what size the prefix is (as long as it's at least a /64). The range is /64 from :: to ::ffff:ffff:ffff:ffff. The bits that fill in the difference between the prefix and /64 are prefix id, in the lan settings.
-
@marjohn56:
Set the range to something like this:
::eeee:0000:0000:0001 to ::eeee:ffff:ffff:ffff
That's based on a /56 prefix.
It doesn't matter what size the prefix is (as long as it's at least a /64). The range is /64 from :: to ::ffff:ffff:ffff:ffff. The bits that fill in the difference between the prefix and /64 are prefix id, in the lan settings.
What prefix ID in the LAN Settings, where's that then? It would be different if it was a /48 prefix, unless you wanted 65k+ subnets. :P
-
Well, it's up to 8 bits, not that anyone would ever have that many subnets. The rest would be for delegated prefixes. But the point that the dhcpv6 subnet range is 64 bits is the same, irrespective of whether your ISP gave you a /56 or some other size of prefix.
-
We're arguing semantics here, I say potato you say poTAto type thing, the ops issue was he had not entered anything.
-
Lets ignore dhcpv6 entirely for a moment.
I want to know:
why I can't get an ipv6 address from router advertisement on my box when I have tracking interface used, with unmanaged router advertisementwhile
I can get an ipv6 address from router advertisement on my box when I have when I have static interface set to the same IP that would be used by tracking interface, with unmanaged router advertisement turned on
-
This is what happens to my pfSense in this scenario with a nightly change of the WAN address: The LAN interface gets a global IPv6 address once directly after setting it to track the WAN interface but never again when the WAN interfaces's address changes. Looks like the tracking doesn't work. And then the router advertisements obviously cannot work either.
-
Lets ignore dhcpv6 entirely for a moment.
I want to know:
why I can't get an ipv6 address from router advertisement on my box when I have tracking interface used, with unmanaged router advertisementwhile
I can get an ipv6 address from router advertisement on my box when I have when I have static interface set to the same IP that would be used by tracking interface, with unmanaged router advertisement turned on
Don't know, but I set mine to assisted and have never had a problem. That way the client can decide what they want either way,
-
This is what happens to my pfSense in this scenario with a nightly change of the WAN address: The LAN interface gets a global IPv6 address once directly after setting it to track the WAN interface but never again when the WAN interfaces's address changes. Looks like the tracking doesn't work. And then the router advertisements obviously cannot work either.
Why would the wan interface address change?
dhcp6c should be sending renew signals. What is your dhcp log showing with respect to dhcp6c?
This is what mine looks like, OK my dhcp6c is modified to give more info and the interface.inc is different but the process of renew is pretty much the same except it says renew. In fact with the newer dhcp6c and interface.inc the call to rc.newwanipv6 does not get called on renew and my system runs solidly as do many others.
Can you give some more information rather than just saying it does not work. Do you need to set 'Do not wait for a RA' or not, what is the refresh time of your ISP? If you run dhcp6c in debug mode it will give you all the information you need to decide if the problem is there or not.
If the lease is not being renewed then you have a problem, but the first thing to do is to find out what the renew time should be and look at the logs around that time and see what's happening.
-
@marjohn56:
Why would the wan interface address change?
Comcast claims I have a static ipv6, but I've seen the network ID change.
Why they change me occassionally, I don't know.
It's really annoying.I don't want to risk a situation where the network ID changes, and then the ipv6 network goes down when I'm not there.
If I have a tracking interface, with working unmanaged RA, it'll be self healing.
With tracking interface:
If the network address changes, then the router advertisement changes, which then the local host ipv6 address changes.It's a safety net.
-
I've never known an ISP to change a static without advising the client first, it would cause absolute havoc.
It sounds like you have a 'Sticky' static address, which can be made even more sticky by fixing the DUID and IAID, as the IAID does is fixed with pfSense ( at present ) that will not change. I suggest you set your DUID to fix it at its current value. You can also turn on 'Do not send release' which will prevent dhcp6c from sending a release signal, some ISP's will give you a new address/prefix if they get a release signal. However as Comcast say you are on a static this should not happen either.
I have a sticky dhcp6 address, through experimentation it's been found that if both the above are carried out, fixing the DUID and never sending a release signal then the prefix never changes, the only side note would be if pfsense went offline for several days, in which case I 'might' get a new prefix.
-
Comcast claims I have a static ipv6, but I've seen the network ID change.
Google searches still show that Comcast does not support static ipv6 addressing. My ipv6 address changes every time they put in a new modem. My ipv4 address is unchanged across all the supplied modems.
Don't expect a static any time soon. The 'static' problem is supposed to be taken care of by DNS when the router and DNS providers get it all working. "Services, DHCPv6 Server & RA, LAN, DHCPv6 Server, Dynamic DNS Display" is the new static in it's early stages.
I don't want to risk a situation where the network ID changes, and then the ipv6 network goes down when I'm not there.
If I have a tracking interface, with working unmanaged RA, it'll be self healing.
No it won't. Try repowering the modem with a switch in between the router and the cable box so the router can't sense link down. The address won't change but connectivity will be lost.
NATv6 FTW until this problem is fixed.
-
You can also turn on 'Do not send release' which will prevent dhcp6c from sending a release signal, some ISP's will give you a new address/prefix if they get a release signal.
Where is that setting? I sometimes get a new prefix and in testing I could see pfSense send a DHCPv6 release after I disconnected and reconnected the WAN Ethernet cable. My DUID has not changed since last May. I'm on Rogers.
-
You can also turn on 'Do not send release' which will prevent dhcp6c from sending a release signal, some ISP's will give you a new address/prefix if they get a release signal.
Where is that setting? I sometimes get a new prefix and in testing I could see pfSense send a DHCPv6 release after I disconnected and reconnected the WAN Ethernet cable. My DUID has not changed since last May. I'm on Rogers.
Interfaces/WAN/DHCP6 Client Configuration - Do not allow PD/Address release.
DUID hold is in System/Advanced/Networking.
-
I don't see that, even under Advanced Configuration. I'm running pfSense 2.3.2_1.
-
DHCP6 Client Configuration, 2.4B ;)
"Do not allow PD/Address release"
"dhcp6c will send a release to the ISP on exit, some ISPs then release the allocated address or prefix. This option prevents that signal ever being sent"
