WAN and LAN Fiber Optics!
-
Hello everyone!
I've been straggling with pfsense here is my setup:
Soekris NET6501
Cox Fiber OpticsExamples of my IP's:
Public:
Routed IP 65.65.65.35
Gateway 65.65.65.34I also got static IP's:
network 65.65.65.104/29
65.65.65.106 - 65.65.65.110
Gateway 65.65.65.105Obviously I need to setup WAN to Routed IP and Gateway on em0 interface:
WAN Ip 65.65.65.35
WAN Gateway 65.65.65.34I created LAN on em1 interface 10.5.1.1
From web gui I can do a test ping to 8.8.8.8 from WAN and LAN just fine, but any pc that is on lan and gets IP address from network 10.5.1.1/24 can't get outside of lan at all….
Also how would I assign static IP's that they gave me?
Guys please help me out here!!!!!!
-
I assume 65.65.65 is not your real subnet?
A common cause of not get internet access on LAN is having set a gateway on the LAN interface. Do you see more than one gateway in System: Routing: Gateways:?
A common way to use assigned static IPs would be to use virtual IPs on the WAN and 1:1 NAT them to devices on the LAN. If you need to use the public IPs on the LAN you'll need to disable NAT.
Steve