[SOLVED] ahcich0 timeout
-
Hello,
Im new to pfSense and would like to try it but during install I receive ahcich0 timeout error. I have searched this and other forums for the solitution, tried advices but no luck. Still getting the same error when installing pfSense 2.3.3
I have checked all options in BIOS but again, no luck. What is more bizzare, that when installing OPNSense 17.1, everything is ok. However I really would like to install pfSense rather than OPNSense. Any advise guys? -
I have tried
set hint.ahci.0.msi="0"
Also
Set hint.ahcich.0.sata_rev="2"
I have tried other HDDs and all the settings in BIOS
It boots only on Legacy setting.Still same problem. When installing pfSense 2.3.3
I get ahcich timeout in slot …..
And CAM status: command timeout
Any help? -
Must be some difference in the installer or handling of that disk controller.
Try a 2.4 snapshot from https://snapshots.pfsense.org/
-
same thing…
during install, when executing commands/sbin/bsdlabel - B -r -w ada0s1 auto
on 77% throws errors:
ahcich0: Timeout on slot 10 port 0
ahcich0: is 00000000 cs 00000400 ss 00000400 rs 00000400 tfd 40 serr 00000000 cm 0000c917
ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 10 3f 00 00 40 00 00 00 00 00 00
ada0:ahcich0:0:0:0): CAM statuis: Command timeout
ada0:ahcich0:0:0:0) Retrying command:(
what is the difference between OPNSense and pfSense latest versions, that OPNSense installs with no errors and pfSense failes?
Maybe I should try earlier version of pfSense?
-
Sorry, I have tried 2.3.4 which causes the same error
2.4 is only for AMD and I am running on intel
-
amd64 is 64-bit Intel and AMD.
i386 is 32-bit only.
2.4 works on Intel and AMD 64-bit processors.
https://en.wikipedia.org/wiki/X86-64#AMD64
-
Thanks, that helped. 2.4 installed with no errors :)
but now Im wandering…... I was using pfSense 2.3.3 i386 on quite new PC. I have not tried 2.3.3 AMD64.
Maybe that was the problem? I will try and reply soon. Just to confirm ;) -
It works installing 2.3.3 AMD64. no errors
thanks