VLAN routing non-functional after 2.3.3 upgrade
-
Hi,
I've been running pfSense with 5 VLANs on my em1 interface on my router, all tagged.
VLAN1 is on 10.10.2.0/24
VLAN11 is 10.10.11.0/24
VLAN12 is 10.10.12.0/24
etc..
LAN2 host
| /–-------------VLAN11 hosts
(em2) / /----------------------VLAN13 hosts
Internet(Comcast)---(em0)pfSense(em1)====(1/g48)Dell 6248======Other Dell Powerconnect
\======Other Dell PowerconnectI upgraded from 2.3.2 to 2.3.3 and the network is now non-functional. Things seemed to be fine for a while but then traffic stopped flowing between pfSense and VLANs.
Any ideas. I've disabled all but one VLAN.
In the DHCP logs I see hosts broadcasting for an address, and they get offered an address according to the log, but they never ACK/claim the lease.I've connected a PC to em2 and configured it as a secondary LAN with no VLAN config. Works with no issues.
-
Nothing from 2.3.2 to 2.3.3 would have changed anything there.
Packet capture and see what's really going on.
-
Those PCAPs don't make much sense. I don't see any tagged traffic arriving at all in pcap-4.
Please post a screen shot of your Interfaces > Assign and the output from Diagnostics > Command Prompt Execute: ifconfig -a
-
No issue here with pfSense. Configuration error on switch which didn't manifest as a problem immediately, so didn't cause a problem initially.
-
Wow. Sorry, man. it looks like I hit modify there instead of reply. Ugh.
Glad you got it sorted out though.