Dynamic DNS Cloudflare v4 API issues with pfSense
-
Can someone with Cloudflare and one of these records try applying this patch with the System Patches package?
http://atxfiles.pfsense.org/jimp/patches/cfddns-at.diff
That lets the GUI accept an @ for the hostname which should let it work.
If that does work and the records update properly and operate as expected, I'll commit the change, along with changing the upgrade code so that if the hostname ended up blank it would get pre-filled with @.
If this doesn't work, then there is still another change I can try, but again I need someone who has Cloudflare with an appropriate record to test it.
-
I 'l try in a few hours, i'm at work now. Thank you.
-
It doesnt work, i patched the file /src/usr/local/www/services_dyndns_edit.php "manualy" ā¦in the diff file the line from where start the code is line 111 but on my file it start at lineĀ 149```
/diff --git a/src/usr/local/www/services_dyndns_edit.php b/src/usr/local/www/services_dyndns_edit.php
index acff97f..07f1636 100644
--- a/src/usr/local/www/services_dyndns_edit.php
+++ b/src/usr/local/www/services_dyndns_edit.php
@@ -111,6 +111,8 @@ if ($_POST['save'] || $_POST['force']) {
/* Namecheap can have a @. and . in hostname /
if ($pconfig['type'] == "namecheap" && ($_POST['host'] == '.' || $_POST['host'] == '' || $_POST['host'] == '@.' || $_POST['host'] == '@')) {
$host_to_check = $_POST['domainname'];-
} elseif ((($pconfig['type'] == "cloudflare") || ($pconfig['type'] == "cloudflare-v6")) && ($_POST['host'] == '@.' || $_POST['host'] == '@')) { -
$host_to_check = $_POST['domainname']; } else { $host_to_check = $_POST['host'];/
The good thing is .. now "@" is accepted but it doesnt work. This is my log file:Mar 1 18:06:17 php-fpm 35954 /services_dyndns_edit.php: Dynamic DNS: updatedns() starting
Mar 1 18:06:17 php-fpm 35954 /services_dyndns_edit.php: Dynamic DNS cloudflare (@.high-we.com): xxx.xxx.xxx.98 extracted from local system.
Mar 1 18:06:17 php-fpm 35954 /services_dyndns_edit.php: Dynamic DNS (@.high-we.com): running get_failover_interface for wan. found pppoe3
Mar 1 18:06:17 php-fpm 35954 /services_dyndns_edit.php: Dynamic DNS cloudflare (@.high-we.com): _update() starting.
Mar 1 18:06:22 php-fpm 35954 /services_dyndns_edit.php: Dynamic DNS cloudflare (@.high-we.com): _checkStatus() starting.
Mar 1 18:06:22 php-fpm 35954 /services_dyndns_edit.php: phpDynDNS (@): (Error) Zone or Host ID was not found, check the hostnameBest Regards -
-
OK, I'll have to change that to sub @ or @. for "" (nothing) in the backend when that happens. I'll work up a different patch later today.
-
If you need someone else with Cloudflare and dynamic DNS, I can try to provide assistance where needed also.
-
OK, I'll have to change that to sub @ or @. for "" (nothing) in the backend when that happens. I'll work up a different patch later today.
Any new? about fix ..
Thank you.
Best Regards -
Revert my previous patch and try this one: http://atxfiles.pfsense.org/jimp/patches/cfddns-at-trim.diff
-
Can someone with Cloudflare and one of these records try applying this patch with the System Patches package?
http://atxfiles.pfsense.org/jimp/patches/cfddns-at.diff
That lets the GUI accept an @ for the hostname which should let it work.
If that does work and the records update properly and operate as expected, I'll commit the change, along with changing the upgrade code so that if the hostname ended up blank it would get pre-filled with @.
If this doesn't work, then there is still another change I can try, but again I need someone who has Cloudflare with an appropriate record to test it.
Old patch:
diff --git a/src/usr/local/www/services_dyndns_edit.php b/src/usr/local/www/services_dyndns_edit.php index acff97f..07f1636 100644 --- a/src/usr/local/www/services_dyndns_edit.php +++ b/src/usr/local/www/services_dyndns_edit.php @@ -111,6 +111,8 @@ if ($_POST['save'] || $_POST['force']) { /* Namecheap can have a @. and *. in hostname */ if ($pconfig['type'] == "namecheap" && ($_POST['host'] == '*.' || $_POST['host'] == '*' || $_POST['host'] == '@.' || $_POST['host'] == '@')) { $host_to_check = $_POST['domainname']; + } elseif ((($pconfig['type'] == "cloudflare") || ($pconfig['type'] == "cloudflare-v6")) && ($_POST['host'] == '@.' || $_POST['host'] == '@')) { + $host_to_check = $_POST['domainname']; } else { $host_to_check = $_POST['host'];Revert my previous patch and try this one: http://atxfiles.pfsense.org/jimp/patches/cfddns-at-trim.diff
ThisĀ patch is the same with previous patch :)
New patch:```
diff --git a/src/usr/local/www/services_dyndns_edit.php b/src/usr/local/www/services_dyndns_edit.php
index acff97f..07f1636 100644
--- a/src/usr/local/www/services_dyndns_edit.php
+++ b/src/usr/local/www/services_dyndns_edit.php
@@ -111,6 +111,8 @@ if ($_POST['save'] || $_POST['force']) {
/* Namecheap can have a @. and . in hostname /
if ($pconfig['type'] == "namecheap" && ($_POST['host'] == '.' || $_POST['host'] == '' || $_POST['host'] == '@.' || $_POST['host'] == '@')) {
$host_to_check = $_POST['domainname'];-
} elseif ((($pconfig['type'] == "cloudflare") || ($pconfig['type'] == "cloudflare-v6")) && ($_POST['host'] == '@.' || $_POST['host'] == '@')) { -
$host_to_check = $_POST['domainname']; } else { $host_to_check = $_POST['host'];
-
-
Well, hmm. It wasn't before I copied it. Let me make it again.
-
Fetch it again, should be the correct one now.
-
Now its ok with the file.. i'll try the patch in a about 15 minutes..
-
I can confirm that the new patch that jimp provided is now working with Cloudflare DDNS. Thank you!
-
Yes ā¦ its working now!!! Thank You very much!!
-
I created https://redmine.pfsense.org/issues/7357 for this issue and pushed that fix. It will be in the next new snapshots and whatever release we put out next.
Thanks for testing!
-
I have aplied your path and it solve the GUI problem. I could now put @ in host and save the DynDNS.
But I am getting this in the log (I have changed real domain with "domain.demo"):
Mar 8 15:46:27 php-fpm 92633 /services_dyndns_edit.php: phpDynDNS (@): UNKNOWN ERROR - Invalid request headers
Mar 8 15:46:27 php-fpm 92633 /services_dyndns_edit.php: phpDynDNS (@): PAYLOAD: {"success":false,"errors":[{"code":6003,"message":"Invalid request headers","error_chain":[{"code":6103,"message":"Invalid format for X-Auth-Key header"}]}],"messages":[],"result":null}
Mar 8 15:46:27 php-fpm 92633 /services_dyndns_edit.php: Dynamic DNS cloudflare (domain.demo): _checkStatus() starting.
Mar 8 15:46:26 php-fpm 92633 /services_dyndns_edit.php: Dynamic DNS cloudflare (@.domain.demo): _update() starting.
Mar 8 15:46:26 php-fpm 92633 /services_dyndns_edit.php: Dynamic DNS (@.domain.demo): running get_failover_interface for wan. found vmx0
Mar 8 15:46:26 php-fpm 92633 /services_dyndns_edit.php: Dynamic DNS cloudflare (@.domain.demo): xxx.xxx.xxx.xxx extracted from local system.
Mar 8 15:46:26 php-fpm 92633 /services_dyndns_edit.php: Dynamic DNS: updatedns() startingI am on:
2.3.3-RELEASE (amd64)
built on Thu Feb 16 06:59:53 CST 2017
FreeBSD 10.3-RELEASE-p16 -
OKā¦ my bad.
Have to put Global API key as password, do not put your account password as password.
User = user
Password = Global API KeyWorks great... ThanksĀ :)
-
I'm on the latest release (2.4.0.b.20170308.0906) and I'm having a related issue or perhaps a regression.Ā (I think.)
I'm updating a domain with the wildcard checkbox set.Ā The domain to be updated is *.subdomain.domain.com.
I have confirmed that I am able to set the IP directly using curl and the cloudflare api.Ā Via the pfsense updater, the update fails and I get the following in the log.
Mar 8 12:31:38 php-fpm 92474 /services_dyndns_edit.php: phpDynDNS (home): (Error) Zone or Host ID was not found, check the hostname.
Mar 8 12:31:38 php-fpm 92474 /services_dyndns_edit.php: Dynamic DNS cloudflare (subdomain.domain.com): _checkStatus() starting.
Mar 8 12:31:37 php-fpm 92474 /services_dyndns_edit.php: Dynamic DNS cloudflare (subdomain.domain.com): _update() starting.
Mar 8 12:31:37 php-fpm 92474 /services_dyndns_edit.php: DynDns (subdomain.domain.com): Dynamic Dns: cacheIP != wan_ip. Updating. Cached IP: 0.0.0.0 WAN IP: xxx.xxx.xxx.xxx Initial update.Thanks!
Update: I was able to successfully update a non-wildcard domain.Ā So, looks like whatever causes this issue is related to wildcard updates alone.
-
OKā¦ my bad.
Have to put Global API key as password, do not put your account password as password.
User = user
Password = Global API KeyWorks great... ThanksĀ :)
As far as I know, Cloudflare has always required use of your global API key as password for dynamic DNS update. I have the same issue where I cannot update a root domain (blah.tld), as it requires a subdomain. The patch linked in the earlier posts works for me.
-
The patched worked for pfsense 2.3.3 but I would like to update all the subdomains and root domain of a zone with the same ip, how can I do that? The wild card thing doesn't seem to work nor can I use the asterisk for the host name.
