Version 2.3.3_1 is available

johnpoz

Mine just updated without issue via the gui.

A Former User

It worked out fine here but half way through the GUI was not showing any progress. I could see the nics shutdown and start again so I closed the browser and logged in again to a good update.

AWeidner

@AWeidner:

I don't dare to reboot the box :-\

Replying to myself: took the risk, rebooted the box after more than 3 hours. Seems to work. Fingers crossed :P

segfooled

I figured the system had logged me out already on the webui, when I logged back in the system reported the p1 status in the dashboard (without reboot). I then rebooted just as a matter of caution and it's back like normal.
Still weird.

supremerulerxenu

Update via GUI from 2.3.3 without a problem.

lysol

Updated from the GUI fine here as well:

Installed packages to be UPGRADED:
pfSense-kernel-pfSense: 2.3.3 -> 2.3.3_1 [pfSense-core]
pfSense-rc: 2.3.3 -> 2.3.3_1 [pfSense-core]

Number of packages to be upgraded: 2
[1/2] Upgrading pfSense-rc from 2.3.3 to 2.3.3_1…
[1/2] Extracting pfSense-rc-2.3.3_1: …. done
[2/2] Upgrading pfSense-kernel-pfSense from 2.3.3 to 2.3.3_1…
[2/2] Extracting pfSense-kernel-pfSense-2.3.3_1: …....... done
===> Keeping a copy of current kernel in /boot/kernel.old
Upgrade is complete. Rebooting in 10 seconds.

Locking package pfSense-kernel-pfSense... done.
Success

segfooled

Great - I know what it looks like when it's ok though and would be more interested to learn what went wrong…

exoticsportcars

Like I stated in my previous message,

Anyone know why the FreeBSD version is still p16 when the patch notes say it should be p17?

My system updated successfully as far as I know.

https://doc.pfsense.org/index.php/2.3.3-p1_New_Features_and_Changes

See attached for a screenshot of the GUI.

pfsense.jpg_thumb

segfooled

same here - and no idea, sorry

pfsense.PNG_thumb

exoticsportcars

Seems that it is on 10.3 p17 if you check via the console cmd.

So I'd assume the versioning on the GUI wasn't changed?

See attached.

pfsense2.jpg_thumb

Senfan

Yeah, looks like you're right. I have P16 on GUI but console cmd check says P17. It's not a bug, it's a feature :o

doktornotor

@Senfan:

Yeah, looks like you're right. I have P16 on GUI but console cmd check says P17. It's not a bug, it's a feature :o

Shows P17 in the GUI here. Likely another symptom of the "package manager needs a brain transplant".

doktornotor

Now, can someone tell me what's this?


Configuring IPsec VPN... Mar 10 18:23:40 ipsec_starter[42810]: Starting weakSwan 5.5.1 IPsec [starter]...
Mar 10 18:23:40 ipsec_starter[42810]: no netkey IPsec stack detected
Mar 10 18:23:40 ipsec_starter[42810]: no KLIPS IPsec stack detected
Mar 10 18:23:40 ipsec_starter[42810]: no known IPsec stack detected, ignoring!
done
Mar 10 18:23:41 ipsec_starter[43518]: charon (43621) started after 280 ms

(IPsec does actually work, though seeing similar WTF in console output is not exactly what one would expect.)

jimp

If the GUI shows p16 something must be cached by your browser or maybe it never rebooted after the update.

The kernel version reported by uname wouldn't have anything to do with pkg, and should show the same anywhere.

@doktornotor that IPsec error is harmless, strongSwan whines about that on FreeBSD because that check is Linux-y. https://wiki.strongswan.org/projects/1/wiki/FreeBSD#Known-Problems

Ramosel

Had a successful update to 2.3.3_1 on my SG-4860, save one tiny glitch… reporting here for FYI purposes only, not a bitch.
all the ancillary packages packages restarted successfully this time too.

My Dynamic DNS Status widget did show the cached IP not only as bad but had a : extension with an 8 digit port number.
Going into the service and punching "Save & Request Update" resolved even this small issue.

jonese

@segfooled:


===> Removing static obsoleted files

I had the exact same issue. Waited move than an hour. I figured I had accidentally canceled the web page or something…

I did note that I had a kernel locked or something message prior to that.

I rebooted and did the upgrade via the shell instead. It did some updating and things appear good now.

I hope future upgrades go smoother..... not exactly confidence inspiring with a problematic upgrade.

guterkerl

I did the upgrade through ssh using option 13. I only have a few packages so didn't have any issues. uname shows p17

Installed packages to be UPGRADED:
	pfSense-rc: 2.3.3 -> 2.3.3_1 [pfSense-core]
	pfSense-pkg-tinc: 1.0.28_2 -> 1.0.28_3 [pfSense]
	pfSense-pkg-squidGuard: 1.15 -> 1.16 [pfSense]
	pfSense-pkg-squid: 0.4.36 -> 0.4.36_1 [pfSense]
	pfSense-pkg-darkstat: 3.1.3_3 -> 3.1.3_4 [pfSense]
	pfSense-kernel-pfSense: 2.3.3 -> 2.3.3_1 [pfSense-core]
	pfSense-default-config: 2.3.3 -> 2.3.3_1 [pfSense-core]
	pfSense-base: 2.3.3 -> 2.3.3_1 [pfSense-core]
	pfSense: 2.3.3 -> 2.3.3_1 [pfSense]
	curl: 7.52.1_1 -> 7.53.0 [pfSense]

Number of packages to be upgraded: 10

doktornotor

@jimp:

@doktornotor that IPsec error is harmless, strongSwan whines about that on FreeBSD because that check is Linux-y. https://wiki.strongswan.org/projects/1/wiki/FreeBSD#Known-Problems

Yeah I figured it's some sort of logspam, thanks.

segfooled

@jonese:

@segfooled:
===> Removing static obsoleted files
I had the exact same issue. Waited move than an hour. I figured I had accidentally canceled the web page or something…

I did note that I had a kernel locked or something message prior to that.

I rebooted and did the upgrade via the shell instead. It did some updating and things appear good now.

I hope future upgrades go smoother..... not exactly confidence inspiring with a problematic upgrade.

Ok to recap: I had not cancelled the WebUI updater, anyway it sat there at the above cleaning status and never rebooted. Upon manual reboot I was at 2.3.3_1 BUT p16.

Solved: Update via console (ssh) option 13). Kernel package was not updated apparently due to locked kernel. It updated via the console and rebooted to p17. WebUI now shows p17 as well.

I would assume that everybody seeing p16 in the WebUI has the locked kernel update issue, so go update via console/ssh to solve this.

Re-reading my upgrade page that I quoted earlier, it contains this line:```
pfSense-kernel-pfSense-2.3.3 is locked and may not be modified


No idea what locked the kernel… will probably do updates through the console in future.

doktornotor

The kernel package is locked normally on purpose (and only unlocked on upgrades). Dunno what makes the package manager think it's missing, it sure like hell wouldn't boot without kernel. Sigh…