APU2 boot fail (Resolved)
-
This is an existing firewall which stopped working. Not a new install.
-
Best guess, unless someone has a bit more knowledge, is your boot device is corrupt. I hope you have your config backed up.
-
Well there's nothing to debug here, do a new install. It won't boot without kernel.
-
Yes was corrupt. Used this (http://www.ufsexplorer.com/) to browse the card but just garbage. Replaced for now. Had so many issues with the APU2. Nervous about using this device!
-
Yes was corrupt. Used this (http://www.ufsexplorer.com/) to browse the card but just garbage.
So you had a compact flash card die? With the price of SSD's so low why would you bother with compact flash?
-
No it was a 16gb msata SSD that came from pcengines
-
How long was it in service and did you have TRIM enabled?
-
Yes I had trim enabled. In-service for about six months.
-
That was the one sold by PC Engines? The initial revisions were completely broken.
-
Yes pcengines. Think I will be moving to supermicro platform. All my supermicro systems have had zero failures.
-
I meant the SSD… Supermicro won't exactly help with a faulty SSD.
-
ok. Maybe my issue that pfsense support though was the MB of the pcengines was really the ssd? or maybe both for this system.
db:0:kdb.enter.default> bt
Tracing pid 3499 tid 100150 td 0xfffff8006a6834b0
kdb_enter() at kdb_enter+0x3e/frame 0xfffffe012113f730
vpanic() at vpanic+0x146/frame 0xfffffe012113f770
panic() at panic+0x43/frame 0xfffffe012113f7d0
pmap_remove_pages() at pmap_remove_pages+0x736/frame 0xfffffe012113f8b0
vmspace_exit() at vmspace_exit+0x9c/frame 0xfffffe012113f8f0
exit1() at exit1+0x65f/frame 0xfffffe012113f980
sys_sys_exit() at sys_sys_exit+0xe/frame 0xfffffe012113f990
amd64_syscall() at amd64_syscall+0x40f/frame 0xfffffe012113fab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe012113fab0
–- syscall (1, FreeBSD ELF64, sys_sys_exit), rip = 0x8008fa14a, rsp = 0x7fffffffec48, rbp = 0x7fffffffec60 ---panic: bad pte va 8008a2000 pte 0
cpuid = 1
KDB: enter: panic
