Cheap small office build, 6PCs, 40/10 DSL
-
I've actually ordered APU2C4 bundle. I'll post my impressions when it comes :)
-
I've actually ordered APU2C4 bundle. I'll post my impressions when it comes :)
not enough ram and that amd apu is obsolete. ok if you do not run squid+squidguard i guess
-
not enough ram and that amd apu is obsolete. ok if you do not run squid+squidguard i guess
For a 40/10 DSL connection? It'll be more than enough. I run a 45/5 VDSL connection on a tiny VM on a tiny low power ESXI server and have more than enough power for OpenVPN at full speed serving ~30 nodes or so in my home, 3 LAN segments. Even 512MB RAM is enough for that use case. OP specifically stated his use case and it didn't include proxy or IDS. Even if it had, I still think the APU2C4 would be more than enough.
-
not enough ram and that amd apu is obsolete. ok if you do not run squid+squidguard i guess
4GB of RAM is more than enough. I run Snort and pfBlockerNG with my APU2C4 and memory usage is normally around 12% to 20%.
-
4GB of RAM is more than enough. I run Snort and pfBlockerNG with my APU2C4 and memory usage is normally around 12% to 20%.
Again and again I find myself baffled by why people think they need so much RAM to run pfSense. Thanks for the real-world example.
-
squid+squidguard , with that many users, will need more then 4gb
the cpu will bottleneck clamav
my core2 e6420 @ 3.2ghz with 4gb ddr2 is enough for me alone on 250/20 cable, but has issues when heavy load as per snort and clamav in squid on large transfers
got a s1366 with a 6 core xeon and 12gb ddr3 that will become my pfsense box
-
Till last month I was running monowall on Pentium ii 300Mhz with 384MB RAM. I won't run squid here, just OpenVPN which will be used rarely.
I think APU2C4 is overkill for my needs, but I like form factor and consumption.
It should also be future proofed if higher speeds become available in my area. -
4GB of RAM is more than enough. I run Snort and pfBlockerNG with my APU2C4 and memory usage is normally around 12% to 20%.
Again and again I find myself baffled by why people think they need so much RAM to run pfSense. Thanks for the real-world example.
It depends on what you're doing with it.
My system pretty much always has 50-60% of 8GB in use.
-
It depends on what you're doing with it.
My system pretty much always has 50-60% of 8GB in use.
I agree 100%. I only offered my example of what could be expected on a slow connection with a couple of packages running. YMMV definitely applies here.
-
It depends on what you're doing with it.
My system pretty much always has 50-60% of 8GB in use.
Agreed. I was just responding specifically to the OP's specific use case and the apparent knee-jerk reaction regarding the hardware (and specifically the RAM) required. Obviously you can use a fair amount of RAM. But that doesn't mean you need it to run a pfSense firewall. The packages will soak it up, no doubt. But those are optional.
-
In total ~200 Euro incl. VAT.
APU2C4 bundle with 16 Gb or 32 GB might be coming also on 200 Euro - 220 Euro here in Germany
and the Varia store is selling and shipping world wide!
