IPSEC Tunnel Active but not working ?!
-
Hi,
I have a problem with a simple IPSEC Tunnel; my pfsenses are displaying the status of the tunnel as Active, but pings are not working at all..
- I tried to reboot both of my pfsense but nothing changed.
- I deleted the VPN and re-created it, but nothings changed again.
- I also guarantee that the configuration of my VPN on both pfsense is exactly the same.
Concerning the IP Configuration :
PFSense01 =
LAN : 10.32.71.254/21
WAN : 51.xx.xx.220/32PFSense02 =
LAN : 10.32.79.254/21
WAN : 87.xx.xx.142/32From pfsense01, when I'm trying to ping the other pfsense (10.32.79.254), I have 100% loss :/
And same result if I test a ping from pfsense02 to pfsense01…============
IPSEC Tunnel status in the homepage :
pfsense01 :
pfsense02 :
–--
VPN - IPsec Configuration View :
pfsense01 :
pfsense02 :
–--
IPsec Status :
pfsense01 :
pfsense02 :
–--
Firewall IPsec Rule :
On both pfsenses :
–--
Last IPsec System Logs :
pfsense01 :
pfsense02 :
–--
Could someone help me plz ?
Thx for reading !
-
It looks to work now.
I changed the NICs to E1000E.
I restarted the service like 10-15, until it works.And I also make differents cron to initiate some ping every minute through the tunnel.
Everything is fine currently. Will post here if I meet a problem again.
-
Hello, I have a similar problem with 2.3.3 version, on pfsense 2.1.5 works fine.
What is your pfsense version?
I'm running the pfsense into a xenserver 7.0.