For replace "existent DUALWAN + 2 * routers " by PC server with WINXP pfsense
-
i search to replace my 2 * Routers / FreeCom FSG-3 by this ( SERVEUR is WINXP computer with Microsoft Virtual PC 2007 + pfSense )
Wanadoo-x is an ADSL Box similar to Modem + routeri have 2 * Box + 2 * ADSL
no load balancing or faillover
WANADOO-1 <-> SERVEUR WAN1 Realtek1 <-> pfSense-WAN
DHCP DHCP
\
pfSense LAN DHCP <–> SERVER LAN GBits) <--> Home Network
/
WANADOO-2 <-> SERVEUR WAN2 Realtek2 <-> pfSense-OPT1
DHCP DHCP
before :
WANADOO-1 <-> FreeCOM FSG-3-1 WAN1 <-> FreeCOM FSG-3-1 LAN
10.0.0.100 10.0.0.1 192.168.1.100
\
Home Network ( 192.168.1.xxx )
/
WANADOO-2 <-> FreeCOM FSG-3-2 WAN2 <-> FreeCOM FSG-3-2 LAN
10.0.0.200 10.0.0.2 192.168.1.200
test with FVS124G NetGear run no problem
WANADOO-1 <-> FVS124G-WAN1
10.0.0.100 10.0.0.1
\
FVS124G LAN GBits<–> Home Network ( 192.168.1.xxx )
/
WANADOO-2 <-> FVS124G-WAN2
10.0.0.200 10.0.002
functionnality requested :
if computer with IP < 192.168.1.1 go to ADSL2
if computer with IP > 192.168.1.127 go to ADSL2with this i can use all my computers in the same network
for change ADSL link i use netsh....
Thanks for help
Pierre
http://www.netgear.fr/produits/produit.php?prod=FVS124G
http://interface.netgear-forum.com/FVS124G/login.htm for programming
left mode --> load balancing
bottom page --> i add : Protocol Binding WAN1 - Service ANY Destination : ANY - Source : Adress Range : 192.168.1.1 to 192.168.1.127
bottom page --> i add : Protocol Binding WAN2 - Service ANY Destination : ANY - Source : Adress Range : 192.168.1.127 to 192.168.1.250with FVS124G i use balancing mode with 2 * routes dedicated