Can't access to my modem
-
hello dear friends i have a two problem first
i'm using pfsense and mikrotik together but i can't access to my two modems
my small network diagram image on attachments
the second proplem ppoe connection if power loss the two adsl lines make a connection but one of them work and the other not only if i disconnect it and reconnect it again no idle time out no on demand
i wish you could help me
many thanks and sorry for my bad en
-
You mean you can't access the modems? 192.168.1.1 and 192.168.2.1?
https://doc.pfsense.org/index.php/Accessing_modem_from_inside_firewall
Steve
-
yes steve right , i will try this again
unfortunately this dosen't work i don't know where is the proplem realy
i will post my config may be there is something wrong -
i followed this steps Steve but no luck https://doc.pfsense.org/index.php/Accessing_modem_from_inside_firewall
see my config in attachment image
wan,wan2=ppoe bridge connection
modem1:192.168.1.1
modem2:192.168.2.1
LAN : 4.4.4.0/24
interfaces ips as in the image
rules as image
i have shutdown mikrotik but also can't access to modems
thank you
-
That should work if the modems are able to respond.
Can you ping them from the modem interfaces directly in the pfSense GUI?
Steve
-
ping ok using Pfsense diagnostics/ping
–- 192.168.1.1 ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.618/0.697/0.745/0.056 ms--- 192.168.2.1 ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.469/0.525/0.560/0.040 ms -
Can you ping them if you select LAN as source there?
If so the NAT is working fine and you probably have a firewall rule missing somewhere.
If you;re using policy routing to send packets to a gateway grouyp you will need a firewall rule above that to bypass it to reach the modem interfaces.
Steve
