New to pfSense - Setting up 1st network
-
Yeah you need a switch! For the money you spent on what surely is overkill for your small setup with 4860, you could of gotten shitton of switch ports on a fully managed switch for the matter. 2440 prob would of been better pfsense box for smb setup..
-
We tried several different paths to get things working on the 4860. When the truck showed up with equipment from one of the other offices, there was a 24-port Netgear switch in there with the server and UPS! Bridging the ports on the 4860 did work, but seemed to hinder the performance. We were getting several noticeable network delays. The switch has solved our problems. I am glad too, we had more equipment arrive that I didn't know was coming. Thanks to everyone for the ideas and help!
-
ASICs FTW! (you really do not want to "switch" in software)
Glad it all worked out.
-
Thank you, Derelict! I really appreciate all the help and advice. Either way you look at it, you got me in there working and messing around. I have learned quite a lot in the last few days. I have a long way to go but am in the right direction at this point!
-
" but seemed to hinder the performance. "
Who would of thunk it ;)
Which is why you don't try and use a $750 router/firewall as a switch… When you could get better performance out of a $30 switch...
-
I think he got it already.
-
Johnpoz, I was not "trying to use a $750 router/firewall as a switch. That was never our intention. It was a solution provided by another member to try. I thanked him for the help. It was appreciated.
I also never intended to buy a $30 switch or even a $300 switch for that matter. They may serve a purpose in most networks around the world but don't fit our needs. That is why I stated that "We have spent all that we can, for now, no new switches or anything for a bit." Our intentions were to spend around $2000 for a switch. Why get a switch with SFP+ when we have a cable modem? There has been a plan in place and construction to build fiber out to us for two months now.We bought the router specifically when we were going to use it for 5 separate networks, which worked perfectly. The problem arose when it was decided to have a group room which included the server, NAS, Printers, Copier, Projector, and various other things that we all chose to share. We were able to create firewall rules to allow communications between networks but didn't like how it worked. We apparently had the option of setting up VPN's between networks, but that seemed like a lot of work for the end result.
Plans and ideas have changed more than just this once. The Netgear XS728T (not $30) that came in with the server was never intended for a SOHO when it was bought either. It was purchased for and set up in a business complex which had fiber connectivity throughout as the backbone. Now it just happens to be here. Our building was wired with Cat 6A because it was decided that at some point, we may use the bandwidth. As the server, NAS and 2 workstations have 10GB ethernet connectivity and the big RAID10 is all SSD, the file transfer rates are well above a 1GBps connection.
-
"Our intentions were to spend around $2000 for a switch"
That is s pretty hefty switch.. So you were going to do 10ge or something?
"Why get a switch with SFP+ when we have a cable modem?"
Because you wanted to use some SFP+ modules to connect to say another switch in another building via different fiber modes or copper even. Not sure what that has to do with your isp connection via cable modem? SFP or SFP+ are very common on switches for uplinks. Even your cheaper $100 switches can use sfp modules.
" They may serve a purpose in most networks around the world but don't fit our needs."
What??? Did you mean to say every network everywhere? ;)
-
Unless one has a specific need to push around a lot of data locally (10G), a SOHO generally does not need to spend $2000 on a switch.
-
No – not unless they have money to burn ;) That is going to be 10ge switch or some serious port density..
Shoot you could get a Cisco 2960X 24 ports with 4 sfp+ and 300W of POE power for 1800 from CDW..
For a soho wanting to do 10ge you could get Netgear 16port 10ge copper (XS716T-100NES) for like 1200...
$2k is a lot of money to spend on switch for a soho/smb that is for sure..
-
HAHA, you're both right, of course. We have one video editor with two systems in his office and his very own ductless mini-split for A/C. He Films in 8K and edits down to 4K and sometimes 1080p for certain clients. The RAID10 on his server is all SSD and he is pushing 30-70GB in every file transfer The rates I was seeing earlier were over >=2GBps. He is fine tuning everything in his setup as I do other stuff.
Yes, the switch does have multiple SFP+ for connecting the fiber in, out to the server and the other 2 ports were for failover on two other switches. I didn't get to see the whole network previously, but it was fast! I on the other hand, only do photography work, maybe a YouTube video now and again LOL. I can transfer 250 edited photos from my DAS to the NAS in under a minute 90% of the time. Stuff waits on me, most of the time LOL. The switch we are using is 10GB already but that is what we were buying. Netgear XS728T from B&H Photo https://www.bhphotovideo.com/bnh/controller/home?O=&sku=1197586&gclid=CP_y2JSL5tMCFUKSfgodlpgPFg&is=REG&ap=y&m=Y&c3api=1876%2C%7Bcreative%7D%2C%7Bkeyword%7D&A=details&Q= if that link works. Either way, we don't need to buy it since we have one already.
Anyway, thanks for the help and ideas. Who knows what this will become in the end. We technically have 8 larger offices that can be filled with a networking closet on the other side of the building. We have room for expansion!
-
So you were doing 10ge or need to do 10ge? And you tried to connect your stuff via bridge on 1ge interfaces?? I am really freaking confused here..
2GBytes/ps would have to be 10ge.. Even then that's really on the high end!!
Are you saying that is what it use to do, until you came in and F'd it up??? You have no hardware that could do a 2GBps file transfer.. when you say his server? You mean his workstation? Or some server directly connected to his workstation via 10ge??
-
…when you say his server? You mean his workstation? Or some server directly connected to his workstation via 10ge??
Didn't he mention that the new server arrived and along came the Netgear 10G switch?
So I'd assume workstation <-> server traffic. -
Your right he did mention a XS728T.. But sounded like he was doing his 2GBps before he setup pfsense? ;)
What is the new config/drawing?
