Pfsense 2.3.4 X64 Loadbalanced Not stabil
-
I have set up 3 dsl lines as load-balancing, but the stabilization does not work Internet pages are sometimes slow
3 adsl hat 16mbit
Layer 1 2 3
Member setAlso, the gateway monitor is offline
Monitor ip addresses 8.8.8.8 4.2.2.2I want to distribute the load equally to the lines and the stability work helps to cheer you up.
-
Then you should set all lines to Tier 1, and set your LAN > WAN rule to use the Gateway group.
As for gateway monitor offline are you sure that pfsense can actuall use the WANs?
Best regards
Kostas
-
There is no problem in configuration firewall rule when I do not load balancing correctly there is no problem I can use the lines separately.
not: TP-LINK TG-3468 100/1000 REALTEK PCI-EXP ETHERNET
-
Sure, you can do "policy routing" meaning create Aliases with internal IPs of hosts and use LAN > WAN rules to route them through the gateways you like. Make sure those LAN rules to be above the main LAN > WAN rule.
Best regards
Kostas