Nas4Free behind pfsense
-
Thank you for your help
-
I am still not been able to run Nas4free behind firewall for remote access
I have static ips for firewall, Nas4free and DVR I can access DVR remotely as well as local but still unable to access Nas4Free from remote location.
I know all of you recommend openVPN but I don't know how to setup openvpn as I tried but confused fr example I dont know how to make certificate and the name of server host or address in openvpn clients.
can anybody help me for step by step configuration.
-
you click he wizard tab and will have openvpn up and running in 30 seconds..
Does your nas4free have a gateway set pointing to pfsense? How exactly are you trying to access this nas4free? http? ftp? Smb?? What protocol??
-
i am using owncloud on nas4free and smb
on pfsense (options on wizard local user access/ldap or radius)
on pfsense I understand Local User Access is for user who access locally but to allow remote access outside of my network which shouid I use LDAP or Radius? am I right?
-
"local user access/ldap or radius)"
Really dude??? Do you have ldap or radius for your users to auth too?
So you want to access smb across the public internet.. Yeah good luck with that ;)
-
no i was asking you what is local user access?
I do not want to use samba as well because i am using owncloud -
Its a user you create on pfsense, so that this user can access your vpn, etc.
-
@irs:
no i was asking you what is local user access?
Are you sure this is not over-your-head at the moment? Start small, tinker with your setup and get used to how pfSense works. Then you can configure it reasonably without shooting yourself in the foot.
Put "learn OpenVPN configuration" on your to-do list as well. -
I am looking a guide to do configure a DVR behind pfsense?
I tried several attempts port forward but no luck.
I am now trying to build a openVPN but i have few questions.
1.) I have static public ip where should I put that static IP? though already configured on WAN
2.) should I need to port forward even in openVPN?how I am going to access DVR remotely?
Thanks in advance -
- you wouldn't put it anywhere in openvpn..
- No
You would access your dvr via its fqdn you resolve once you have connected to your vpn or via its IP address.
-
i successfully completed openVPN but can only access firewall nothing else.
what wrong i am doing?
still can not access nas4free from remote login.
? -
And do you have any firewall on your nas4free device that would limit access to the local network. And now your coming from your vpn network.
Can you ping the pfsense IP on the lan interface your nas4free is connected too? Do a traceroute from your vpnclient to the nas4free IP do you see the trace go down your tunnel? Did you place any firewall rules on your vpn connection..
-
i can ping with pfsense the ip address of my nas4free but when ever i tried to ping from my remote computer it wont
-
"Do a traceroute from your vpnclient to the nas4free IP do you see the trace go down your tunnel? Did you place any firewall rules on your vpn connection.."
How to traceroute? I can not see any traceroute command in vpnclient
i hav no firewall rules for vpn -
And do you have any firewall on your nas4free device that would limit access to the local network.
From the NAS4Free release notes:
Login error 403
Do you have WebGUI Login error 403? Make shure the pc is in the same network! by default the System|General Setup Hosts allow field is empty so any one on the same network of LAN interface can access the WebGUI allowed. With a space delimited set of IP or CIDR notation you can add computers from outer network. As an example the outer IP address and LAN address for remote access. -
And do you have any firewall on your nas4free device that would limit access to the local network. And now your coming from your vpn network.
Can you ping the pfsense IP on the lan interface your nas4free is connected too? Do a traceroute from your vpnclient to the nas4free IP do you see the trace go down your tunnel? Did you place any firewall rules on your vpn connection..
here is traceroute
1 * * *
2 * * *
3 * * *
4 * * *
5 * * *
6 * * *
7 * * *
8 * * *
9 * * *
10 * * *
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * * -
how I can figure out the error?
-
Do you get the 403 error.. Then biggsy already pointed you to the problem..
As to your traceroute.. you got something wrong there.. Do the traceroute to the IP you can ping?
Here is a normal traceroute through a vpn tunnel
C:\>tracert -d 192.168.9.100 Tracing route to 192.168.9.100 over a maximum of 30 hops 1 93 ms 92 ms 96 ms 10.0.8.1 2 105 ms 100 ms 97 ms 192.168.9.100 Trace complete.I hit the end of the tunnel (pfsense) then I hit the client.
What network behind pfsense, your local network. What is your tunnel network, what is the local network your on when your connecting into the vpn.
So for example my box I am on now is
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : snipped.com
IPv4 Address. . . . . . . . . . . : 10.56.153.210
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.56.153.1My vpn interface
Ethernet adapter Local Area Connection 2:Connection-specific DNS Suffix . : local.lan
IPv4 Address. . . . . . . . . . . : 10.0.8.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :Here is my route table when connected to vpn
C:\>route print | find "10.0.8.100" 10.0.8.0 255.255.255.0 On-link 10.0.8.100 276 10.0.8.100 255.255.255.255 On-link 10.0.8.100 276 10.0.8.255 255.255.255.255 On-link 10.0.8.100 276 192.168.2.0 255.255.255.0 10.0.8.1 10.0.8.100 276 192.168.3.0 255.255.255.0 10.0.8.1 10.0.8.100 276 192.168.9.0 255.255.255.0 10.0.8.1 10.0.8.100 276 224.0.0.0 240.0.0.0 On-link 10.0.8.100 276 255.255.255.255 255.255.255.255 On-link 10.0.8.100 276I would of just given full output - but there are just a shitton of routes in the route table since at work..
-
Microsoft Windows [Version 6.1.7601]
Copyright
2009 Microsoft Corporation. All rights reserved.C:>ping 192.168.0.250
Pinging 192.168.0.250 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.Ping statistics for 192.168.0.250:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),C:>ping 192.168.0.137
Pinging 192.168.0.137 with 32 bytes of data:
Reply from 192.168.0.137: bytes=32 time=41ms TTL=63
Reply from 192.168.0.137: bytes=32 time=42ms TTL=63
Reply from 192.168.0.137: bytes=32 time=43ms TTL=63
Reply from 192.168.0.137: bytes=32 time=55ms TTL=63Ping statistics for 192.168.0.137:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 41ms, Maximum = 55ms, Average = 45msC:>tracert -d 192.168.0.1
Tracing route to 192.168.0.1 over a maximum of 30 hops
1 151 ms 204 ms 222 ms 192.168.0.1
Trace complete.
C:>tracert -d 10.0.7.254
Tracing route to 10.0.7.254 over a maximum of 30 hops
1 45 ms 70 ms 46 ms 10.0.7.1
2 * * * Request timed out.
3 * * * Request timed out.
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * ^CC:>tracert -d 10.0.7.1
Tracing route to 10.0.7.1 over a maximum of 30 hops
1 526 ms 632 ms 191 ms 10.0.7.1
Trace complete.
C:>tracert -d 192.168.0.1
Tracing route to 192.168.0.1 over a maximum of 30 hops
1 351 ms 700 ms 437 ms 192.168.0.1
Trace complete.
C:>tracert -d 192.168.0.250
Tracing route to 192.168.0.250 over a maximum of 30 hops
1 773 ms 736 ms 970 ms 10.0.7.1
2 * * * Request timed out.
3 * ^C
C:>tracert -d 192.168.0.137Tracing route to 192.168.0.137 over a maximum of 30 hops
1 197 ms 263 ms 365 ms 10.0.7.1
2 257 ms 203 ms 105 ms 192.168.0.137Trace complete.
-
My settings are as follows:
OpenVPN on pfsense router
access nework 192.168.0.0/24
NAS4FREE 192.168.0.250 port 12000
Tunnel Network: 10.0.7.0/24
client network 192.168.10.0/24I can connect my DVR but can not connect owncloud and nas4free
C:>route print | find "10.0.7.1"
0.0.0.0 128.0.0.0 10.0.7.1 10.0.7.2 276
128.0.0.0 128.0.0.0 10.0.7.1 10.0.7.2 276
192.168.0.0 255.255.255.0 10.0.7.1 10.0.7.2 276
