Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Updated Failed

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    3 Posts 2 Posters 1.1k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • R Offline
      rlocone
      last edited by

      I recently purchased a SG-1000 and did the upgrade.  Noticed that I wasn't getting and IP.  I consoled in and discovered this.  I did setup a Micro-SD card with the latest image.  Did try shorting the pins to attempt to boot from the SD.  The image was created on Windows via Rufus.

      Booting from: mmc 0 ubldr.bin
      reading ubldr.bin
      217364 bytes read in 20 ms (10.4 MiB/s)
      ## Starting application at 0x88000000 ...
      Consoles: U-Boot console
      Compatible U-Boot API signature found @0x9ef3ab58
      
      FreeBSD/armv6 U-Boot loader, Revision 1.2
      (root@buildbot2.netgate.com, Wed May 17 08:19:35 CDT 2017)
      
      DRAM: 512MB
      Number of U-Boot devices: 3
      U-Boot env: loaderdev='mmc 0'
      Found U-Boot device: disk
        Checking unit=0 slice= <auto>partition=<auto>... good.
      Booting from disk0s2a:
      /boot/kernel/kernel data=0x85fd24+0x482dc syms=[0x4+0x8fe80+0x4+0xa370b]
      
      Hit [Enter] to boot immediately, or any other key for command prompt.
      Booting [/boot/kernel/kernel]...
      /boot/dtb/ufw.dtb size=0x79f4
      Loaded DTB from file 'ufw.dtb'.
      Kernel entry at 0x0x88200100...
      Kernel args: (null)
      Copyright (c) 1992-2016 The FreeBSD Project.
      Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
              The Regents of the University of California. All rights reserved.
      FreeBSD is a registered trademark of The FreeBSD Foundation.
      FreeBSD 11.0-RELEASE-p10 #0 51c8a24f312(RELENG_2_4): Wed May 17 08:21:33 CDT 2017
          root@buildbot2.netgate.com:/xbuilder/crossbuild/work/obj-ufw-recover-armv6/arm.armv6/builder/factory/tmp/FreeBSD-src/sys/uFW arm
      FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
      sysctl: OID number(2) is already in use for 'model'
      CPU: ARM Cortex-A8 r3p2 (ECO: 0x00000000)
      CPU Features:
        Thumb2, Security, VMSAv7
      Optional instructions:
        UMULL, SMULL, SIMD(ext)
      LoUU:2 LoC:3 LoUIS:1
      Cache level 1:
       32KB/64B 4-way data cache WT WB Read-Alloc
       32KB/64B 4-way instruction cache Read-Alloc
      Cache level 2:
       256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc
      real memory  = 536870912 (512 MB)
      avail memory = 513359872 (489 MB)
      Texas Instruments AM335x Processor, Revision ES1.2
      random: entropy device external interface
      ofwbus0: <open firmware="" device="" tree="">
      simplebus0: <flattened device="" tree="" simple="" bus=""> on ofwbus0
      simplebus1: <flattened device="" tree="" simple="" bus=""> on simplebus0
      simplebus2: <flattened device="" tree="" simple="" bus=""> mem 0x210000-0x211fff on simplebus1
      ti_scm0: <ti control="" module=""> mem 0-0x7ff on simplebus2
      aintc0: <ti aintc="" interrupt="" controller=""> mem 0x48200000-0x48200fff on simplebus0
      aintc0: Revision 5.0
      cpulist0: <open firmware="" cpu="" group=""> on ofwbus0
      cpu0: <open firmware="" cpu=""> on cpulist0
      pmu0: <performance monitoring="" unit=""> irq 0 on ofwbus0
      am335x_prcm0: <am335x power="" and="" clock="" management=""> mem 0x200000-0x203fff on simplebus1
      am335x_prcm0: Clocks: System 24.0 MHz, CPU 550 MHz
      ti_pinmux0: <ti pinmux="" module=""> mem 0x800-0xa37 on simplebus2
      am335x_scm0: <am335x control="" module="" extension=""> on ti_scm0
      gpio0: <ti am335x="" general="" purpose="" i="" o="" (gpio)=""> mem 0x44e07000-0x44e07fff irq 7 on simplebus0
      gpiobus0: <ofw gpio="" bus=""> on gpio0
      gpioc0: <gpio controller=""> on gpio0
      gpio1: <ti am335x="" general="" purpose="" i="" o="" (gpio)=""> mem 0x4804c000-0x4804cfff irq 8 on simplebus0
      gpiobus1: <ofw gpio="" bus=""> on gpio1
      gpioc1: <gpio controller=""> on gpio1
      gpio2: <ti am335x="" general="" purpose="" i="" o="" (gpio)=""> mem 0x481ac000-0x481acfff irq 9 on simplebus0
      gpiobus2: <ofw gpio="" bus=""> on gpio2
      gpioc2: <gpio controller=""> on gpio2
      gpio3: <ti am335x="" general="" purpose="" i="" o="" (gpio)=""> mem 0x481ae000-0x481aefff irq 10 on simplebus0
      gpiobus3: <ofw gpio="" bus=""> on gpio3
      gpioc3: <gpio controller=""> on gpio3
      uart0: <ti uart="" (16550="" compatible)=""> mem 0x44e09000-0x44e0afff irq 11 on simplebus0
      uart0: console (115384,n,8,1)
      iichb0: <ti i2c="" controller=""> mem 0x44e0b000-0x44e0bfff irq 17 on simplebus0
      iichb0: I2C revision 4.0 FIFO size: 32 bytes
      iicbus0: <ofw i2c="" bus=""> on iichb0
      iic0: <i2c generic="" i="" o=""> on iicbus0
      icee0: <at24c02> at addr 0xa0 on iicbus0
      iichb1: <ti i2c="" controller=""> mem 0x4802a000-0x4802afff irq 18 on simplebus0
      iichb1: I2C revision 4.0 FIFO size: 32 bytes
      iicbus1: <ofw i2c="" bus=""> on iichb1
      iic1: <i2c generic="" i="" o=""> on iicbus1
      sdhci_ti0: <ti mmchs="" (sdhci="" 2.0)=""> mem 0x48060000-0x48060fff irq 20 on simplebus0
      mmc0: <mmc sd="" bus=""> on sdhci_ti0
      sdhci_ti1: <ti mmchs="" (sdhci="" 2.0)=""> mem 0x481d8000-0x481d8fff irq 21 on simplebus0
      mmc1: <mmc sd="" bus=""> on sdhci_ti1
      ti_wdt0: <ti watchdog="" timer=""> mem 0x44e35000-0x44e35fff irq 23 on simplebus0
      ti_mbox0: <ti system="" mailbox=""> mem 0x480c8000-0x480c81ff irq 26 on simplebus0
      ti_mbox0: revision 4.0
      am335x_dmtimer0: <am335x dmtimer2=""> mem 0x48040000-0x480403ff irq 28 on simplebus0
      Event timer "DMTimer2" frequency 24000000 Hz quality 500
      am335x_dmtimer1: <am335x dmtimer3=""> mem 0x48042000-0x480423ff irq 29 on simplebus0
      Timecounter "DMTimer3" frequency 24000000 Hz quality 500
      usbss0: <ti am33xx="" integrated="" usb="" otg="" controller=""> mem 0x47400000-0x47400fff on simplebus0
      usbss0: TI AM335X USBSS v0.0.13
      musbotg0: <ti am33xx="" integrated="" usb="" otg="" controller=""> mem 0x47401400-0x474017ff,0x47401000-0x474011ff irq 54 on usbss0
      usbus0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
      usbus0 on musbotg0
      musbotg1: <ti am33xx="" integrated="" usb="" otg="" controller=""> mem 0x47401c00-0x47401fff,0x47401800-0x474019ff irq 55 on usbss0
      usbus1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
      usbus1 on musbotg1
      cpswss0: <3-port Switch Ethernet Subsystem> mem 0x4a100000-0x4a1007ff,0x4a101200-0x4a1012ff irq 38,39,40,41 on simplebus0
      cpswss0: CPSW SS Version 1.12 (0)
      cpswss0: Initial queue size TX=128 RX=384
      cpsw0: <ethernet switch="" port=""> on cpswss0
      miibus0: <mii bus=""> on cpsw0
      micphy0: <micrel 10="" 100="" 1000="" ksz9031="" phy=""> PHY 1 on miibus0
      micphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
      cpsw0: Ethernet address: 
      cpsw1: <ethernet switch="" port=""> on cpswss0
      miibus1: <mii bus=""> on cpsw1
      micphy1: <micrel 10="" 100="" 1000="" ksz9031="" phy=""> PHY 2 on miibus1
      micphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
      cpsw1: Ethernet address: 
      etherswitch0: <switch controller=""> on cpswss0
      ti_adc0: <ti adc="" controller=""> mem 0x44e0d000-0x44e0dfff irq 44 disabled on simplebus0
      ti_adc0: scheme: 0x1 func: 0x730 rtl: 0 rev: 0.1 custom rev: 0
      cryptosoft0: <software crypto="">
      Timecounters tick every 1.000 msec
      usbus0: 480Mbps High Speed USB v2.0
      usbus1: 480Mbps High Speed USB v2.0
      ugen0.1: <mentor graphics=""> at usbus0
      uhub0: <mentor 1="" 9="" graphics="" otg="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus0
      ugen1.1: <mentor graphics=""> at usbus1
      uhub1: <mentor 1="" 9="" graphics="" otg="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus1
      mmcsd0: 64GB <sdhc 3="" 2017="" adlce="" 8.0="" sn="" 94c22496="" mfg="" 02="" by="" sd=""> (read-only) at mmc0 48.0MHz/4bit/65535-block
      uhub1: 1 port with 1 removable, self powered
      uhub0: 1 port with 1 removable, self powered
      mmcsd1: 4GB <mmchc 112="" 1999="" s10004="" 0.8="" sn="" 1ec92547="" mfg="" 08="" by="" 0x0000=""> at mmc1 48.0MHz/8bit/65535-block
      Trying to mount root from ufs:/dev/ufsid/591c4e6f92b05c42 [rw,noatime]...
      warning: no time-of-day clock registered, system time will not be set accurately
      Starting file system checks:
      /dev/ufsid/591c4e6f92b05c42: FILE SYSTEM CLEAN; SKIPPING CHECKS
      /dev/ufsid/591c4e6f92b05c42: clean, 135569 free (33 frags, 16942 blocks, 0.0% fragmentation)
      g_vfs_done():ufsid/591c4e6f92b05c42[WRITE(offset=163840, length=32768)]error = 30
      g_vfs_done():ufsid/591c4e6f92b05c42[WRITE(offset=7700480, length=4096)]error = 30
      mount: /dev/ufsid/591c4e6f92b05c42: Read-only file system
      Mounting root filesystem rw failed, startup aborted
      ERROR: ABORTING BOOT (sending SIGTERM to parent)!
      May 17 13:22:04 init: /bin/sh on /etc/rc terminated abnormally, going to single user mode
      Enter full pathname of shell or RETURN for /bin/sh:
      # g_vfs_done():ufsid/591c4e6f92b05c42[WRITE(offset=163840, length=32768)]error = 30
      g_vfs_done():ufsid/591c4e6f92b05c42[WRITE(offset=7700480, length=4096)]error = 30
      random: unblocking device.
      # mount
      /dev/ufsid/591c4e6f92b05c42 on / (ufs, local, noatime, read-only)
      devfs on /dev (devfs, local)
      # df
      Filesystem                  512-blocks   Used  Avail Capacity  Mounted on
      /dev/ufsid/591c4e6f92b05c42    1816376 731824 939248    44%    /
      devfs         
      uname -r
      11.0-RELEASE-p10
      # uname -a
      FreeBSD  11.0-RELEASE-p10 FreeBSD 11.0-RELEASE-p10 #0 51c8a24f312(RELENG_2_4): Wed May 17 08:21:33 CDT 2017     root@buildbot2.netgate.com:/xbuilder/crossbuild/work/obj-ufw-recover-armv6/arm.armv6/builder/factory/tmp/FreeBSD-src/sys/uFW  arm</mmchc></sdhc></mentor></mentor></mentor></mentor></software></ti></switch></micrel></mii></ethernet></micrel></mii></ethernet></ti></ti></ti></am335x></am335x></ti></ti></mmc></ti></mmc></ti></i2c></ofw></ti></at24c02></i2c></ofw></ti></ti></gpio></ofw></ti></gpio></ofw></ti></gpio></ofw></ti></gpio></ofw></ti></am335x></ti></am335x></performance></open></open></ti></ti></flattened></flattened></flattened></open></auto></auto>
      

      Thanks for your time and attention,

      1 Reply Last reply Reply Quote 0
      • B Offline
        binaryburford
        last edited by

        I have exactly the same problem. Tried creating the SD card from dd on a mac and then rufus on a PC.

        very frustrating…..

        1 Reply Last reply Reply Quote 0
        • B Offline
          binaryburford
          last edited by

          There is a new(older) recovery image in the portal, which seems to be working….

          Hurrah!

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.