Feature request - SMART to report and email properly
-
I recently dealt with a hard drive failure that I didn't even know was happening. It was corrupting data and reared it's ugly head as a bug in the GUI.
I noticed the issue when I looked at the system logs and the console as a CAM error but SMART didn't report any problems. The dashboard said the drive was fine.Upon pulling the drive I ran a test and low and behold SMART was saying the drive is in a warning state. Reallocation Events and Current Pending Error Counts were flagged.
Again though, SMART on PfSense said nothing.I created another thread about this found here…
https://forum.pfsense.org/index.php?topic=131109.0My original post is found here...
https://forum.pfsense.org/index.php?topic=131078.0Point being SMART is not periodically testing. Say on a schedule?
Smart is not able to email upon a pending failure or caution flag.
The drive in which the OS and data is stored is a critical part of a machine. It would be good that a periodic test/check of this component is run. If a warning or failure is detected it would be good to send a notification upon a detected warning and/or alert.
My request is that SMART do more than just be a pretty pretty giving a false sense of security.
I understand that SMART won't detect all errors, but it can detect much of what is going on and most of the time will tell you if a drive in on the fritz or on rather that the drive is on it's way out.
-
Wrong forum.
Open board for feedback related to this forum
-
Well sigh. I didn't see the feature request spot.
-
General
For things that do not fit into one of the more specific categories below.