Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Nas4Free behind pfsense

    Scheduled Pinned Locked Moved NAT
    38 Posts 6 Posters 6.8k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • I
      irs
      last edited by

      My settings are as follows:
      OpenVPN on pfsense router
      access nework 192.168.0.0/24
      NAS4FREE 192.168.0.250 port 12000
      Tunnel Network: 10.0.7.0/24
      client network 192.168.10.0/24

      I can connect my DVR but can not connect owncloud and nas4free

      C:>route print | find "10.0.7.1"
                0.0.0.0        128.0.0.0                10.0.7.1        10.0.7.2    276
              128.0.0.0        128.0.0.0              10.0.7.1        10.0.7.2    276
            192.168.0.0    255.255.255.0        10.0.7.1        10.0.7.2    276

      1 Reply Last reply Reply Quote 0
      • johnpozJ
        johnpoz LAYER 8 Global Moderator
        last edited by

        Well this says vpn is working

        C:>tracert -d 192.168.0.137

        Tracing route to 192.168.0.137 over a maximum of 30 hops

        1  197 ms  263 ms  365 ms  10.0.7.1
          2  257 ms  203 ms  105 ms  192.168.0.137

        So your issue is on your nas box – most likely the firewall as already pointed out multiple times!

        An intelligent man is sometimes forced to be drunk to spend time with his fools
        If you get confused: Listen to the Music Play
        Please don't Chat/PM me for help, unless mod related
        SG-4860 24.11 | Lab VMs 2.8, 24.11

        1 Reply Last reply Reply Quote 0
        • I
          irs
          last edited by

          thanks for your help.

          Firewall?
          inside my Nas4free firewall is not checked it is not configured.

          1 Reply Last reply Reply Quote 0
          • P
            P3R
            last edited by

            @irs:

            NAS4FREE 192.168.0.250 port 12000

            In the very first post of the thread you say that the NAS4Free is on the OPT1 interface.

            Now you're saying NAS4Free have the address 192.168.0.250.

            Have you moved the NAS4Free to the LAN interface now?

            1 Reply Last reply Reply Quote 0
            • I
              irs
              last edited by

              Actually it was beginning as i am new i wast knew many things than suggested in this post to protect well must do that on openvpn.

              so now I am on openvpn but still am unable to access my nas4free from remote on openvpn.?

              I hope explain it well?

              1 Reply Last reply Reply Quote 0
              • P
                P3R
                last edited by

                Is NAS4Free connected to the LAN network 192.168.0.0/24?

                Does it have the address 192.168.0.250/24?

                1 Reply Last reply Reply Quote 0
                • I
                  irs
                  last edited by

                  yes my nas4free is connected to my pfsense network address 192.168.0.0/24
                  and my NAS4FREE ip is 192.168.0.250
                  my DVR is also connected on the same network 192.168.0.137
                  and I am able to use it with that local network

                  my openvpn is connected on tunnel 10.0.7.0/24

                  my remote ip 192.168.10.0/24 windows machine

                  I can connect owncloud locally but can not connect through vpn.

                  ![openVPN diag.png](/public/imported_attachments/1/openVPN diag.png)
                  ![openVPN diag.png_thumb](/public/imported_attachments/1/openVPN diag.png_thumb)

                  1 Reply Last reply Reply Quote 0
                  • P
                    P3R
                    last edited by

                    Go to System, General, WebGUI, Hosts allow in NAS4Free admin GUI.

                    If you have only 192.168.0.0/24 configured there, change it to 192.168.0.0/24 192.168.10.0/24

                    Also in NAS4Free admin GUI:

                    Check that on Network, LAN Management, IP address you have the network set to /24

                    Check that you have Network, LAN Management, Gateway set to whatever address your pfsense have on it's LAN interface (in your first post it was 192.168.0.1).

                    1 Reply Last reply Reply Quote 0
                    • I
                      irs
                      last edited by

                      thx for the suggestions I will try and let you know the results.

                      Onece again Thank you for the help you and all other extended to me.

                      1 Reply Last reply Reply Quote 0
                      • B
                        biggsy
                        last edited by

                        @P3R:

                        Go to System, General, WebGUI, Hosts allow in NAS4Free admin GUI.

                        If you have only 192.168.0.0/24 configured there, change it to 192.168.0.0/24 192.168.10.0/24

                        Also in NAS4Free admin GUI:

                        Check that on Network, LAN Management, IP address you have the network set to /24

                        Check that you have Network, LAN Management, Gateway set to whatever address your pfsense have on it's LAN interface (in your first post it was 192.168.0.1).

                        You will also have to add 10.0.7.0/24 (your VPN network) to the NAS4Free hosts allow.

                        1 Reply Last reply Reply Quote 0
                        • P
                          P3R
                          last edited by

                          @biggsy:

                          You will also have to add 10.0.7.0/24 (your VPN network) to the NAS4Free hosts allow.

                          Will that be the source address of the traffic from the VPN?

                          If so, no reason to allow 192.168.10.0/24 then?

                          I don't know OpenVPN as you can see, I use IPSec.

                          Anyway, there must be something else that's very wrong since not even ping works…

                          1 Reply Last reply Reply Quote 0
                          • B
                            biggsy
                            last edited by

                            Yes, the OpenVPN tunnel IP will be needed.

                            In fact, I tried to access the Web UI of my own NAS4Free over OpenVPN (for the first time, I guess).  It didn't work until I added the tunnel network to System, General, WebGUI, Hosts allow.

                            I agree that there is something more serious going on if PING doesn't work.  Hard to tell what the OP has done though.

                            1 Reply Last reply Reply Quote 0
                            • I
                              irs
                              last edited by

                              "I agree that there is something more serious going on if PING doesn't work.  Hard to tell what the OP has done though."

                              so you need my config file?

                              1 Reply Last reply Reply Quote 0
                              • I
                                irs
                                last edited by

                                I tried with the suggested webgui ip address but no luck.

                                Hosts Allow
                                192.168.10.0/24 10.0.7.0/24 192.168.0.0/24
                                Space delimited set of IP or CIDR notation that permitted to access the WebGUI. (empty is the same network of LAN interface)

                                Network, LAN Managment
                                IP Address  192.168.0.250/24
                                Gateway    192.168.0.1

                                1 Reply Last reply Reply Quote 0
                                • First post
                                  Last post
                                Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.