Unable to reboot 2.4

meruem

Seem like you have an ACPI problem if it is failing to read those values.

You might try a different ACPI mode in the BIOS. But it's probably because the motherboard vendor wrote it for Windows only. You running the latest BIOS?

Steve

Yep. latest bios. I tried turning off acpi all kinds of ways .. changed settings for over 4 hours , reinstalled pfsense multiple times. I may be unlucky but I think its a pervasive issue because I read few other online posts of different day 0 kaby lake support mobo's (200 series chipsets) having similar issues on freebsd

meruem

Took a bunch of random shots of bios incase anyone see's any red flags

http://imgur.com/a/hKk3T

meruem

edit: bad info's i gave

meruem

also btw dont do this shit you see all over the net

set hint.acpi.0.disabled="1"

cause then your pc wont boot and you'll spend an hour trying to figure out how to fix it

kpa

@meruem:

also btw dont do this shit you see all over the net
set hint.acpi.0.disabled="1"
cause then your pc wont boot and you'll spend an hour trying to figure out how to fix it

The quoted setting to disable ACPI was valid advice around the year 2000 when ACPI was brand new and the implentations were sometimes very buggy, not anymore. Don't disable ACPI on any modern system, you'll just shoot yourself in the foot.

meruem

Ah ok thanks for background

also i just tried rebooting and it hanged again, so I guess what I said early about adding a pci-e card didnt fix it

meruem

anyone have updates on this? it's terrible having nice new hardware upgrade, but you can reboot the thing without physically going to the case and hitting the reset button

eXceed

@meruem:

also btw dont do this shit you see all over the net
set hint.acpi.0.disabled="1"
cause then your pc wont boot and you'll spend an hour trying to figure out how to fix it

Erm… Tried this and every other solution in this thread.

Do not do the above, it causes kernel panic (way to resolve is to escape to loader prompt. Type set set hint.acpi.0.disabled="0", and remove the line in your devices.hint file (in /boot/ directory).

Tried all ACPI workarounds to no avail.

System specs are:

Intel E3-1270 v5
Supermicro X11DAT
32GB ECC DDR4
128GB NVMe 960 Pro

Boot hangs on uptime, this is kind of critical as this stops updates from being possible remotely. Shutdown/Halt system works fine, however...

EDIT - Just to add I've tried the following (perhaps more can't remember everything):

Disabling ACPI
Enabling ACPI
Disabling ACPI and adding: hw.acpi.handle_reboot with value of 0 and 1 to system tunables
Enabling ACPI and adding: hw.acpi.handle_reboot with value of 0 and 1 to system tunables
Enabling WHEA and adding: hw.acpi.handle_reboot with value of 0 and 1 to system tunables

yon

me too. updated to 0522 1958version.

IMG_20170524_060426.jpg_thumb

betatest

I have the same problem with my ASROCK H270M-ITX and Intel 600p nvme boot drive. Strangely it will only recognise one nic as intel, the other one as generic. It also does not show the wifi adapter but I will not use it anyway.

Do you want me to upload any logs for research?

eXceed

Any update to this issue at all?

Or does anyone know how to raise an issue on issue tracker?

yon

Updating repositories metadata…
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pkg: sqlite error while executing iterator in file pkgdb_iterator.c:1035: database disk image is malformed
pfSense repository is up to date.
All repositories are up to date.
ERROR: It was not possible to determine pkg remote version
Failed
ERROR: It was not possible to determine pfSense-repo remote version
Failed
ERROR: Unable to compare version of pfSense-repo
Failed

meruem

WOOOOOHOOOOOOOOOO. Whatever ya'll did recently, the latest 2.4 dev snappies, my ASRock H270M-ITX/ac UEFI 2.00 is rebooting automatically now and I dont have to physically hit the reset button anymore when I need to reboot (updates, etc). yesssssssssssssssssssssssssssssssssssssssssssssssss. seriously this is the best thing to happen to me all month. no seriously guys.. really

stephenw10

Likely the switch to FreeBSD 11.1 which will have brought with it updates to numerous systems.

Interesting to hear if that helped others who were hitting this before.

Steve

jetwalsh

It is not fixed. Last night, I installed the latest development snapshot (2.4.1) on my Dell T1600, and the system still will not reboot/shutdown. I still must hard reset it. This system worked flawlessly under 2.3. I do not have any USB devices connected to the system (if that helps anyone troubleshoot).

miky

It's working for me, stable 2.4.
THX!! :)