Pfsense Custom Build Hardware Advice needed
-
Hi all
I want to build a custom pfsense router that will meet the Australian National Broadband supply/system:
- On nbn Fibre to the Node/Basement using VDSL2, Modems must be compliant with the nbn … nbn registered FTTN/FTTB Modem/Routers (with VoIP port)
Can this be done?
Requirements
- Internal Wifi or am I better off just adding UBIQUITI ACCESS POINT
- Failover 3G/4G
- VDSL2 support
- OS PFsense
- All build into a minipc fanless device
6)VOIP port
Thanks 8)
-
Can this be done?
In short: No.
All-in-one with internal VDSL2 Modem is not easily possible and Wifi is, as you already pointed out, better served from an external AP.
- Internal Wifi or am I better off just adding UBIQUITI ACCESS POINT
external AP.
- Failover 3G/4G
checked. Use an external 3G/4G modem, aka stick.
- VDSL2 support
nope, not in a single box.
Unless you find a working VDSL2 modem that fits into an internal PCI-what-have-you slot.- OS PFsense
checked.
- All build into a minipc fanless device
dreamer.
- VOIP port
define your needs, this is usually just another ethernet port. If you're talking POTS then no.